Multnomah County, Oregon
Find what your
punch list missed.
Send us photos and your tracking list. Get a written findings report within 24 hours* — before your inspector or auditor does.
— any industry with field inspections in Multnomah County.
$250, one time · Nothing new, no charge · You keep the report either way
*Depending on availability. We'll confirm turnaround when you submit.
Multnomah County enforces Oregon specialty codes across unincorporated areas with heavy annual rainfall driving strict moisture management and drainage requirements. Seismic design category D applies throughout the county due to Cascadia subduction zone exposure. Steep-slope lots require enhanced geotechnical review. CodeBuddy reviews Multnomah County plans for $250 with 24-hour turnaround, covering moisture protection, seismic design, and hillside construction compliance.
Code BuddyPrepared for Acme Mechanical Inc.
Location
Multnomah County, OR
Date
Aug 8, 2026
Trade
Electrical
Findings
Penetration seal not matching approved submittal — visible gap at fire-rated assembly
Checked against: Company SOP 4.2
Fastener pattern deviates from manufacturer data sheet — 6" OC required, measured at 9" OC
Checked against: Project Spec 08-31
Working clearance below required minimum at panel — 30" required, 22" measured
Checked against: Applicable Standard
codebuddy.chatPage 1 of 4
Trusted by teams at
Three steps. Five minutes.
Submit your job, and our patent-pending AI technology reviews every photo against your standards, specs, and existing tracking.
Tell us about the job.
Project name, address in Multnomah County, and primary trade or discipline. We look up the applicable standards and regulations automatically from the address.
Send your photos and open items.
Upload directly, share a Drive/Dropbox link, or email them over. Your existing tracking sets the bar — anything already on it doesn't count as a finding.
Our patent-pending technology and AI system analyze every photo.
Cross-references each image against your specs, the applicable standards, and your existing tracking — helping identify deviations your list may have missed.
Get your report within 24 hours*.
Each finding includes the photo, the exact location, and the code section or spec it deviates from. Sorted by severity so you know what to fix first.
Built by Code Buddy.
Code Buddy is an AI-powered compliance platform used by thousands of field professionals across construction, energy, manufacturing, and fleet operations. Our patent-pending technology checks job site photos against codes, specs, and standards — the same technology that powers this report.
Built for the people who actually do the work.
Industries supported
Report turnaround
If nothing new identified
The kind of things we help catch.
Examples based on past reports. Each finding includes the photo, location, and the reference it was checked against.
Hillside foundation retaining wall lacks required seismic surcharge loading in geotechnical design for steep-slope parcel
Below-grade wall waterproofing membrane terminates above grade without required counterflashing for rain-heavy Portland metro exposure
Stormwater conveyance pipe diameter undersized for Multnomah County's 25-year rainfall intensity design standard
Bathroom exhaust fan ducted to soffit instead of through roof, risking moisture re-entry in prolonged rain seasons
Outdoor electrical panel lacks required weatherproof-while-in-use cover rated for wet location rain exposure
Rim joist insulation compressed at sill plate reducing effective R-value below Oregon energy code minimum
And only if we identify something that wasn't already on your list.
If everything identified was already on your list, you pay nothing. You keep the report either way.
GET STARTEDLimited spots each week.
Every report is reviewed by a QA professional before delivery — not just generated and sent. That human review step means we can only take a limited number of jobs per week. Submissions are reviewed in the order they're received, and we'll let you know upfront if your report will take longer than 24 hours.
Before you ask.
What building codes does Multnomah County enforce for unincorporated areas?
Multnomah County enforces Oregon specialty codes including structural, mechanical, plumbing, electrical, and energy efficiency codes. Unincorporated parcels outside city limits fall under county jurisdiction for permits, inspections, and plan review.
Does Multnomah County have special requirements for hillside construction?
Yes. Steep-slope parcels in Multnomah County require geotechnical reports, engineered foundations, retaining wall design with seismic surcharge, and erosion control plans. Landslide hazard zones may trigger additional review and restrictions.
How does heavy rainfall affect plan review in Multnomah County?
Multnomah County's annual rainfall exceeding 40 inches requires thorough moisture management details. Reviewers check weather-resistive barriers, window flashing, foundation drainage, and stormwater systems against Oregon codes and county drainage standards.
What seismic standards apply in Multnomah County?
All of Multnomah County falls within seismic design category D due to Cascadia subduction zone proximity. Structural plans must demonstrate compliant lateral systems, hold-downs, and foundation anchorage per the Oregon Structural Specialty Code.
How much does a Multnomah County plan review cost through CodeBuddy?
CodeBuddy reviews Multnomah County plans for $250 with 24-hour turnaround. Reviews address structural seismic design, moisture protection, hillside construction, energy code, and stormwater compliance for unincorporated county parcels.