Miami, Florida
Find what your
punch list missed.
Send us photos and your tracking list. Get a written findings report within 24 hours* — before your inspector or auditor does.
— any industry with field inspections in Miami.
$250, one time · Nothing new, no charge · You keep the report either way
*Depending on availability. We'll confirm turnaround when you submit.
Code Buddy's Inspection Readiness Report for the city of Miami costs a flat $250 with 24-hour turnaround. Miami enforces the Florida Building Code within the High-Velocity Hurricane Zone and applies additional city amendments on stormwater, energy efficiency, and accessibility. Our report checks your photos against both HVHZ structural requirements and Miami's local code overlay so you pass on the first visit.
Code BuddyPrepared for Acme Mechanical Inc.
Location
Miami, FL
Date
Aug 8, 2026
Trade
Electrical
Findings
Penetration seal not matching approved submittal — visible gap at fire-rated assembly
Checked against: Company SOP 4.2
Fastener pattern deviates from manufacturer data sheet — 6" OC required, measured at 9" OC
Checked against: Project Spec 08-31
Working clearance below required minimum at panel — 30" required, 22" measured
Checked against: Applicable Standard
codebuddy.chatPage 1 of 4
Trusted by teams at
Three steps. Five minutes.
Submit your job, and our patent-pending AI technology reviews every photo against your standards, specs, and existing tracking.
Tell us about the job.
Project name, address in Miami, and primary trade or discipline. We look up the applicable standards and regulations automatically from the address.
Send your photos and open items.
Upload directly, share a Drive/Dropbox link, or email them over. Your existing tracking sets the bar — anything already on it doesn't count as a finding.
Our patent-pending technology and AI system analyze every photo.
Cross-references each image against your specs, the applicable standards, and your existing tracking — helping identify deviations your list may have missed.
Get your report within 24 hours*.
Each finding includes the photo, the exact location, and the code section or spec it deviates from. Sorted by severity so you know what to fix first.
Built by Code Buddy.
Code Buddy is an AI-powered compliance platform used by thousands of field professionals across construction, energy, manufacturing, and fleet operations. Our patent-pending technology checks job site photos against codes, specs, and standards — the same technology that powers this report.
Built for the people who actually do the work.
Industries supported
Report turnaround
If nothing new identified
The kind of things we help catch.
Examples based on past reports. Each finding includes the photo, location, and the reference it was checked against.
Entry door assembly not tested to Miami-Dade large-missile impact standard; NOA approval label missing from frame
Concrete block wall reinforcement spacing exceeds 48 inches on center required for HVHZ construction per FBC 2113
GFCI protection missing on kitchen countertop receptacles within six feet of sink per NEC 210.8(A)(6)
Backflow preventer on irrigation tie-in not installed at grade as required by City of Miami plumbing amendments
Peel-and-stick underlayment not sealed at nail penetrations on re-roof in HVHZ wind zone per FBC 1522.4
Smoke detector in high-rise corridor mounted more than 12 inches from ceiling violating NFPA 72 spacing rules
And only if we identify something that wasn't already on your list.
If everything identified was already on your list, you pay nothing. You keep the report either way.
GET STARTEDLimited spots each week.
Every report is reviewed by a QA professional before delivery — not just generated and sent. That human review step means we can only take a limited number of jobs per week. Submissions are reviewed in the order they're received, and we'll let you know upfront if your report will take longer than 24 hours.
Before you ask.
Does the report address City of Miami local amendments on top of the FBC?
Yes. Miami layers its own amendments on stormwater management, accessibility, and energy code over the base Florida Building Code. The $250 report checks against both the FBC and the city-specific overlay.
I have a high-rise project in Miami. Is the report still $250?
The flat $250 covers one project regardless of building height. High-rise projects in Miami trigger additional fire-protection and structural wind-load items, all of which we review within the 24-hour turnaround.
What if my Miami project has both building and zoning issues?
Our report focuses on building-code compliance items visible in your photos. Zoning setbacks, FAR, and land-use issues are outside the scope, but we will flag anything in your photos that suggests a potential zoning conflict.
How does the 24-hour turnaround work for Miami projects?
Submit your photos and open-items list anytime. The 24-hour clock starts when we confirm receipt. Most City of Miami residential reports are returned well within that window depending on workload.
Can I submit photos from my Miami inspector's correction notice?
Absolutely. Photograph each item listed on the correction notice plus surrounding context. We cross-reference the corrections against current FBC and HVHZ requirements and tell you exactly what to fix before re-inspection.