Jacksonville, Florida
Find what your
punch list missed.
Send us photos and your tracking list. Get a written findings report within 24 hours* — before your inspector or auditor does.
— any industry with field inspections in Jacksonville.
$250, one time · Nothing new, no charge · You keep the report either way
*Depending on availability. We'll confirm turnaround when you submit.
Code Buddy's Inspection Readiness Report for Jacksonville projects is a flat $250 with 24-hour delivery. Jacksonville is Florida's largest city by area, with construction spanning military-adjacent facilities near Naval Station Mayport and NAS Jacksonville, port-district industrial work, and sprawling residential development. Our report checks your photos against the Florida Building Code and Jacksonville's local amendments on flood management and wind resistance.
Code BuddyPrepared for Acme Mechanical Inc.
Location
Jacksonville, FL
Date
Aug 8, 2026
Trade
Electrical
Findings
Penetration seal not matching approved submittal — visible gap at fire-rated assembly
Checked against: Company SOP 4.2
Fastener pattern deviates from manufacturer data sheet — 6" OC required, measured at 9" OC
Checked against: Project Spec 08-31
Working clearance below required minimum at panel — 30" required, 22" measured
Checked against: Applicable Standard
codebuddy.chatPage 1 of 4
Trusted by teams at
Three steps. Five minutes.
Submit your job, and our patent-pending AI technology reviews every photo against your standards, specs, and existing tracking.
Tell us about the job.
Project name, address in Jacksonville, and primary trade or discipline. We look up the applicable standards and regulations automatically from the address.
Send your photos and open items.
Upload directly, share a Drive/Dropbox link, or email them over. Your existing tracking sets the bar — anything already on it doesn't count as a finding.
Our patent-pending technology and AI system analyze every photo.
Cross-references each image against your specs, the applicable standards, and your existing tracking — helping identify deviations your list may have missed.
Get your report within 24 hours*.
Each finding includes the photo, the exact location, and the code section or spec it deviates from. Sorted by severity so you know what to fix first.
Built by Code Buddy.
Code Buddy is an AI-powered compliance platform used by thousands of field professionals across construction, energy, manufacturing, and fleet operations. Our patent-pending technology checks job site photos against codes, specs, and standards — the same technology that powers this report.
Built for the people who actually do the work.
Industries supported
Report turnaround
If nothing new identified
The kind of things we help catch.
Examples based on past reports. Each finding includes the photo, location, and the reference it was checked against.
Pile-supported foundation cap connections lack required reinforcement for coastal A-zone per Jacksonville flood ordinance Chapter 652
Standing-seam metal roof clip spacing at 36 inches exceeds 24-inch maximum for Wind Zone 3 exposure per FBC 1522.5
Service entrance equipment installed below base flood elevation in VE flood zone violating NEC 230.70 and local ordinance
Industrial exhaust fan on warehouse dock not interlocked with makeup air system per FBC Mechanical 502.16 for port-area occupancy
Sanitary sewer lateral backwater valve missing on below-grade plumbing in flood-prone Jacksonville riverfront area
Continuous insulation on commercial exterior wall interrupted at shelf angles creating thermal bridge per FBC Energy C402.2
And only if we identify something that wasn't already on your list.
If everything identified was already on your list, you pay nothing. You keep the report either way.
GET STARTEDLimited spots each week.
Every report is reviewed by a QA professional before delivery — not just generated and sent. That human review step means we can only take a limited number of jobs per week. Submissions are reviewed in the order they're received, and we'll let you know upfront if your report will take longer than 24 hours.
Before you ask.
Does the report cover Jacksonville's flood zone requirements along the St. Johns River?
Yes. Much of Jacksonville sits in FEMA AE and VE flood zones along the St. Johns River and Atlantic coast. Our $250 report flags visible flood-elevation deficiencies and identifies items that need surveyor verification.
Can I use the report for military-adjacent construction near Jacksonville naval bases?
Our report covers Florida Building Code compliance for any Jacksonville project site. Military base construction follows federal standards outside our scope, but off-base projects near Mayport or NAS Jax are fully covered.
How fast will I receive results for a Jacksonville project?
Reports are delivered within 24 hours of receiving your photos and open-items list. Jacksonville's large geographic area means varied flood zones and wind exposures, and we tailor findings to your specific project location.
What wind zone does Jacksonville fall in?
Jacksonville is in FBC Wind Zone 3 with ultimate design wind speeds around 140 to 150 mph depending on location and exposure. The $250 report checks roof connections, sheathing nailing, and opening protection against these requirements.
Does the report handle Jacksonville industrial and warehouse inspections?
Yes. Jacksonville's port district drives significant industrial construction. We review structural connections, fire-separation assemblies, exhaust systems, and electrical service items common in warehouse and industrial occupancies.