Orlando, Florida
Find what your
punch list missed.
Send us photos and your tracking list. Get a written findings report within 24 hours* — before your inspector or auditor does.
— any industry with field inspections in Orlando.
$250, one time · Nothing new, no charge · You keep the report either way
*Depending on availability. We'll confirm turnaround when you submit.
Code Buddy's Inspection Readiness Report for Orlando projects is a flat $250 with 24-hour turnaround. Orlando's construction mix spans high-volume commercial tenant buildouts, mixed-use developments, and residential subdivisions in one of Florida's busiest permitting jurisdictions. Our report reviews your photos against the Florida Building Code and Orlando's local amendments on accessibility, energy performance, and fire safety.
Code BuddyPrepared for Acme Mechanical Inc.
Location
Orlando, FL
Date
Aug 8, 2026
Trade
Electrical
Findings
Penetration seal not matching approved submittal — visible gap at fire-rated assembly
Checked against: Company SOP 4.2
Fastener pattern deviates from manufacturer data sheet — 6" OC required, measured at 9" OC
Checked against: Project Spec 08-31
Working clearance below required minimum at panel — 30" required, 22" measured
Checked against: Applicable Standard
codebuddy.chatPage 1 of 4
Trusted by teams at
Three steps. Five minutes.
Submit your job, and our patent-pending AI technology reviews every photo against your standards, specs, and existing tracking.
Tell us about the job.
Project name, address in Orlando, and primary trade or discipline. We look up the applicable standards and regulations automatically from the address.
Send your photos and open items.
Upload directly, share a Drive/Dropbox link, or email them over. Your existing tracking sets the bar — anything already on it doesn't count as a finding.
Our patent-pending technology and AI system analyze every photo.
Cross-references each image against your specs, the applicable standards, and your existing tracking — helping identify deviations your list may have missed.
Get your report within 24 hours*.
Each finding includes the photo, the exact location, and the code section or spec it deviates from. Sorted by severity so you know what to fix first.
Built by Code Buddy.
Code Buddy is an AI-powered compliance platform used by thousands of field professionals across construction, energy, manufacturing, and fleet operations. Our patent-pending technology checks job site photos against codes, specs, and standards — the same technology that powers this report.
Built for the people who actually do the work.
Industries supported
Report turnaround
If nothing new identified
The kind of things we help catch.
Examples based on past reports. Each finding includes the photo, location, and the reference it was checked against.
Restaurant entry threshold exceeds half-inch maximum height for accessible route per FBC 11-4.13.8 and ADA Standards
Sprinkler head deflector distance from ceiling exceeds maximum 12 inches in light-hazard tenant space per NFPA 13
Exterior sign circuit not on dedicated branch circuit with disconnect within sight of sign per NEC 600.6
Rooftop unit vibration isolation pads missing on curb mount creating noise transmission into occupied space below
Anchor bolt embedment in tilt-up panel below minimum 7-bolt-diameter depth required per FBC 1911.5 and ACI 318
Grease interceptor for commercial kitchen undersized for fixture-unit count; Orlando requires sizing per FBC Plumbing 1003.3
And only if we identify something that wasn't already on your list.
If everything identified was already on your list, you pay nothing. You keep the report either way.
GET STARTEDLimited spots each week.
Every report is reviewed by a QA professional before delivery — not just generated and sent. That human review step means we can only take a limited number of jobs per week. Submissions are reviewed in the order they're received, and we'll let you know upfront if your report will take longer than 24 hours.
Before you ask.
Can the report help with Orlando's busy inspection scheduling?
Yes. Orlando's permitting office handles high volume, so failed inspections mean long rescheduling delays. The $250 report identifies likely failure items within 24 hours so you can fix them before your scheduled inspection date.
Does the report cover Orlando commercial tenant buildouts?
Absolutely. Orlando sees constant retail and restaurant buildout activity. We review fire-separation assemblies, accessibility routes, mechanical systems, and electrical work that commonly trigger corrections in commercial inspections.
What Orlando-specific code items does the report flag?
Orlando enforces the Florida Building Code with local amendments on energy efficiency, grease-interceptor sizing, and accessibility. Our report checks against both the base FBC and Orlando's specific requirements.
How many photos should I send for an Orlando mixed-use project?
Send 30 to 50 photos covering each trade and open correction item. Include fire-rated walls, accessible entries, mechanical rough-ins, and panel interiors. The $250 flat fee covers the full review within 24 hours.
Will the report catch accessibility issues before my Orlando inspection?
Yes. Accessibility violations are a top reason for failed Orlando commercial inspections. We check threshold heights, ramp slopes, parking-space dimensions, and signage against FBC Chapter 11 and ADA Standards.