Hillsborough County, Florida
Find what your
punch list missed.
Send us photos and your tracking list. Get a written findings report within 24 hours* — before your inspector or auditor does.
— any industry with field inspections in Hillsborough County.
*Depending on availability. We'll confirm turnaround when you submit.
Code Buddy's Inspection Readiness Report for Hillsborough County is a flat free with 24-hour turnaround. Hillsborough County sits in Wind Zone 3 with large areas in FEMA AE and VE flood zones along Tampa Bay and the Alafia River. Our report evaluates your project photos against the Florida Building Code, local flood-elevation requirements, and Hillsborough's adopted energy code amendments before your county inspector visits.
Code BuddyPrepared for Acme Mechanical Inc.
Location
Hillsborough County, FL
Date
Aug 8, 2026
Trade
Electrical
Findings
Penetration seal not matching approved submittal — visible gap at fire-rated assembly
Checked against: Company SOP 4.2
Fastener pattern deviates from manufacturer data sheet — 6" OC required, measured at 9" OC
Checked against: Project Spec 08-31
Working clearance below required minimum at panel — 30" required, 22" measured
Checked against: Applicable Standard
codebuddy.chatPage 1 of 4
Trusted by teams at
Three steps. Five minutes.
Submit your job, and our patent-pending AI technology reviews every photo against your standards, specs, and existing tracking.
Tell us about the job.
Project name, address in Hillsborough County, and primary trade or discipline. We look up the applicable standards and regulations automatically from the address.
Send your photos and open items.
Upload directly, share a Drive/Dropbox link, or email them over. Your existing tracking sets the bar — anything already on it doesn't count as a finding.
Our patent-pending technology and AI system analyze every photo.
Cross-references each image against your specs, the applicable standards, and your existing tracking — helping identify deviations your list may have missed.
Get your report within 24 hours*.
Each finding includes the photo, the exact location, and the code section or spec it deviates from. Sorted by severity so you know what to fix first.
Built by Code Buddy.
Code Buddy is an AI-powered compliance platform used by thousands of field professionals across construction, energy, manufacturing, and fleet operations. Our patent-pending technology checks job site photos against codes, specs, and standards — the same technology that powers this report.
Built for the people who actually do the work.
Industries supported
Report turnaround
Limited availability
The kind of things we help catch.
Examples based on past reports. Each finding includes the photo, location, and the reference it was checked against.
Bottom-of-lowest-floor elevation documentation missing for structure in AE flood zone per Hillsborough County floodplain ordinance
Roof-to-wall strap embedment in concrete bond beam less than required 4.5 inches per FBC R802.11.1
Exterior weatherproof receptacle cover rated for attendance only; in-use cover required per NEC 406.9(B)(1)
HVAC ductwork penetrating fire-rated garage wall not sealed with listed fire-stop material per FBC 713.3
Elevated water heater platform in flood zone does not clear base flood elevation plus one-foot freeboard requirement
Attic insulation compressed at eave baffles reducing R-value below R-30 minimum required by FBC Energy Conservation
Send us one job. Get a full findings report. No cost, no commitment.
Every report is reviewed by a QA professional before delivery — not just generated and sent. That means we can only take a limited number each week.
GET YOUR FREE REPORTBefore you ask.
Does the report check Hillsborough County flood elevation requirements?
Yes. Hillsborough County has significant AE and VE flood zones along Tampa Bay and interior rivers. Our free report flags visible flood-elevation deficiencies and identifies items that need surveyor documentation before inspection.
How fast will I get results for a Hillsborough County project?
Reports are delivered within 24 hours of receiving your photos and open-items list. Most Hillsborough County single-family projects are returned same day. Commercial or multi-family projects may use the full 24-hour window.
What wind zone does Hillsborough County fall in?
Hillsborough County is in FBC Wind Zone 3 with ultimate design wind speeds around 150 mph. Our report checks roof connections, sheathing attachment, and opening protection against these wind-speed requirements.
Can the report help with a Hillsborough County re-inspection after corrections?
Absolutely. Send photos of each corrected item and we will verify they meet current FBC and Hillsborough County requirements. The free applies whether it is an initial review or a correction follow-up.
Do I need separate reports for projects inside Tampa versus unincorporated Hillsborough County?
Each project site gets its own free report. Tampa and unincorporated Hillsborough share the FBC baseline but differ on local amendments and inspection workflows, so we tailor findings to the exact jurisdiction.