Broward County, Florida
Find what your
punch list missed.
Send us photos and your tracking list. Get a written findings report within 24 hours* — before your inspector or auditor does.
— any industry with field inspections in Broward County.
$250, one time · Nothing new, no charge · You keep the report either way
*Depending on availability. We'll confirm turnaround when you submit.
Code Buddy's Inspection Readiness Report covers Broward County projects for a flat $250 with delivery within 24 hours. Broward County shares the High-Velocity Hurricane Zone designation with Miami-Dade, requiring impact-rated openings, enhanced roof-to-wall connections, and product approvals through the Miami-Dade NOA or Florida Product Approval system. Our report catches HVHZ gaps before your Broward inspector does.
Code BuddyPrepared for Acme Mechanical Inc.
Location
Broward County, FL
Date
Aug 8, 2026
Trade
Electrical
Findings
Penetration seal not matching approved submittal — visible gap at fire-rated assembly
Checked against: Company SOP 4.2
Fastener pattern deviates from manufacturer data sheet — 6" OC required, measured at 9" OC
Checked against: Project Spec 08-31
Working clearance below required minimum at panel — 30" required, 22" measured
Checked against: Applicable Standard
codebuddy.chatPage 1 of 4
Trusted by teams at
Three steps. Five minutes.
Submit your job, and our patent-pending AI technology reviews every photo against your standards, specs, and existing tracking.
Tell us about the job.
Project name, address in Broward County, and primary trade or discipline. We look up the applicable standards and regulations automatically from the address.
Send your photos and open items.
Upload directly, share a Drive/Dropbox link, or email them over. Your existing tracking sets the bar — anything already on it doesn't count as a finding.
Our patent-pending technology and AI system analyze every photo.
Cross-references each image against your specs, the applicable standards, and your existing tracking — helping identify deviations your list may have missed.
Get your report within 24 hours*.
Each finding includes the photo, the exact location, and the code section or spec it deviates from. Sorted by severity so you know what to fix first.
Built by Code Buddy.
Code Buddy is an AI-powered compliance platform used by thousands of field professionals across construction, energy, manufacturing, and fleet operations. Our patent-pending technology checks job site photos against codes, specs, and standards — the same technology that powers this report.
Built for the people who actually do the work.
Industries supported
Report turnaround
If nothing new identified
The kind of things we help catch.
Examples based on past reports. Each finding includes the photo, location, and the reference it was checked against.
Sliding glass doors on east elevation lack Florida Product Approval or Miami-Dade NOA for HVHZ large-missile zone
Simpson H2.5 hurricane clips used where H10 straps required for roof-to-wall connection in HVHZ per FBC Table 2321.1
Rooftop condenser unit tie-down straps not rated for 180 mph ultimate design wind speed in Broward HVHZ area
Arc-fault circuit interrupter protection missing on bedroom circuits as required per NEC 210.12 and FBC Electrical
Roof sheathing nailing pattern at 12-inch spacing exceeds 6-inch edge nailing required in HVHZ per FBC 2322.2
Tankless water heater exhaust termination within 4 feet of operable window violating FBC Mechanical 503.8 clearance
And only if we identify something that wasn't already on your list.
If everything identified was already on your list, you pay nothing. You keep the report either way.
GET STARTEDLimited spots each week.
Every report is reviewed by a QA professional before delivery — not just generated and sent. That human review step means we can only take a limited number of jobs per week. Submissions are reviewed in the order they're received, and we'll let you know upfront if your report will take longer than 24 hours.
Before you ask.
Does the report cover Broward County's HVHZ wind-load requirements?
Yes. Broward County is in the High-Velocity Hurricane Zone just like Miami-Dade. Our $250 report checks impact-rated openings, enhanced roof connections, and product approval labels specific to HVHZ construction standards.
Are Broward County local amendments included in the review?
Our report accounts for Broward County amendments to the Florida Building Code, including locally enforced product-approval requirements and inspection sequences that differ from standard FBC procedures.
How many photos should I send for a Broward County residential project?
Submit 20 to 40 clear photos covering every open correction item, hurricane-hardware connections, window and door labels, and panel interiors. More photos give us more to work with inside the 24-hour turnaround window.
Can the report help me prepare for a Broward County re-inspection?
Definitely. Send photos of each failed item from your correction notice. The $250 report cross-references Broward's HVHZ requirements and tells you what to fix and what documentation to have ready for the re-inspection.
Is there a difference between the report for Broward County and for Miami-Dade?
Both are HVHZ jurisdictions, but each has its own local amendments and inspection procedures. We tailor the report to whichever jurisdiction your project sits in, so findings and code references are specific to Broward.