St. George, Utah
Find what your
punch list missed.
Send us photos and your tracking list. Get a written findings report within 24 hours* — before your inspector or auditor does.
— any industry with field inspections in St. George.
$250, one time · Nothing new, no charge · You keep the report either way
*Depending on availability. We'll confirm turnaround when you submit.
St. George sits in Utah's hot desert southwest with summer temperatures exceeding 110 degrees F, requiring careful HVAC sizing, radiant barrier details, and UV-resistant roofing materials. The city falls in IECC Climate Zone 3B with lower insulation minimums but stringent solar heat gain limits. Rapid residential growth demands efficient permit processing. CodeBuddy reviews St. George plans for $250 with 24-hour turnaround, catching desert climate and energy deficiencies.
Code BuddyPrepared for Acme Mechanical Inc.
Location
St. George, UT
Date
Aug 8, 2026
Trade
Electrical
Findings
Penetration seal not matching approved submittal — visible gap at fire-rated assembly
Checked against: Company SOP 4.2
Fastener pattern deviates from manufacturer data sheet — 6" OC required, measured at 9" OC
Checked against: Project Spec 08-31
Working clearance below required minimum at panel — 30" required, 22" measured
Checked against: Applicable Standard
codebuddy.chatPage 1 of 4
Trusted by teams at
Three steps. Five minutes.
Submit your job, and our patent-pending AI technology reviews every photo against your standards, specs, and existing tracking.
Tell us about the job.
Project name, address in St. George, and primary trade or discipline. We look up the applicable standards and regulations automatically from the address.
Send your photos and open items.
Upload directly, share a Drive/Dropbox link, or email them over. Your existing tracking sets the bar — anything already on it doesn't count as a finding.
Our patent-pending technology and AI system analyze every photo.
Cross-references each image against your specs, the applicable standards, and your existing tracking — helping identify deviations your list may have missed.
Get your report within 24 hours*.
Each finding includes the photo, the exact location, and the code section or spec it deviates from. Sorted by severity so you know what to fix first.
Built by Code Buddy.
Code Buddy is an AI-powered compliance platform used by thousands of field professionals across construction, energy, manufacturing, and fleet operations. Our patent-pending technology checks job site photos against codes, specs, and standards — the same technology that powers this report.
Built for the people who actually do the work.
Industries supported
Report turnaround
If nothing new identified
The kind of things we help catch.
Examples based on past reports. Each finding includes the photo, location, and the reference it was checked against.
Window solar heat gain coefficient exceeds 0.25 maximum for west-facing glazing required in St. George Climate Zone 3B
Cooling system capacity undersized for St. George 107 degree F outdoor design temperature with west-facing great room exposure
Asphalt shingle product not rated for extreme UV exposure and 150 degree F roof surface temperatures common in southern Utah
Hot water recirculation loop lacks insulation on return line causing excessive heat gain in unconditioned attic space
Concrete mix design for exterior flatwork missing fiber reinforcement for thermal cycling and expansive soil conditions
Service entrance conductors derated for ambient temperature but calculation does not use St. George 110 degree F peak values
And only if we identify something that wasn't already on your list.
If everything identified was already on your list, you pay nothing. You keep the report either way.
GET STARTEDLimited spots each week.
Every report is reviewed by a QA professional before delivery — not just generated and sent. That human review step means we can only take a limited number of jobs per week. Submissions are reviewed in the order they're received, and we'll let you know upfront if your report will take longer than 24 hours.
Before you ask.
What climate zone is St. George in for energy code purposes?
St. George falls in IECC Climate Zone 3B, the only major Utah city outside Zone 5. This means lower insulation requirements but stricter solar heat gain coefficient limits for windows and mandatory cool-roof or radiant barrier provisions.
Does St. George have unique building code challenges compared to northern Utah?
Yes. St. George faces extreme desert heat rather than snow loads. Design priorities include UV-resistant materials, oversized cooling systems, thermal expansion allowances for concrete, and protection against expansive clay soils common in Washington County.
Are there expansive soil requirements for St. George construction?
Many St. George sites have expansive clay soils that require post-tensioned or structurally engineered foundations. A geotechnical report is typically required, and builders must follow specific grading and moisture management recommendations.
How fast can CodeBuddy review plans for a St. George permit?
CodeBuddy delivers a complete code compliance review within 24 hours for $250. The report addresses desert climate requirements, energy code compliance for Zone 3B, structural concerns, and all mechanical and electrical items.
What wind load design speed applies in St. George?
St. George uses a basic wind speed of 115 mph for Risk Category II structures per ASCE 7. Exposure Category C is common on open desert lots, which increases design pressures on roofing, cladding, and garage doors.