Salt Lake City, Utah
Find what your
punch list missed.
Send us photos and your tracking list. Get a written findings report within 24 hours* — before your inspector or auditor does.
— any industry with field inspections in Salt Lake City.
$250, one time · Nothing new, no charge · You keep the report either way
*Depending on availability. We'll confirm turnaround when you submit.
Salt Lake City enforces Utah-amended IBC and IRC with additional local amendments for historic districts, solar-ready requirements, and downtown high-rise construction. Located in Seismic Design Category D along the Wasatch Front, the city requires rigorous lateral force design. Climate Zone 5B mandates strict energy envelope standards. CodeBuddy reviews Salt Lake City plans for $250 with 24-hour turnaround, addressing seismic, snow, and energy compliance.
Code BuddyPrepared for Acme Mechanical Inc.
Location
Salt Lake City, UT
Date
Aug 8, 2026
Trade
Electrical
Findings
Penetration seal not matching approved submittal — visible gap at fire-rated assembly
Checked against: Company SOP 4.2
Fastener pattern deviates from manufacturer data sheet — 6" OC required, measured at 9" OC
Checked against: Project Spec 08-31
Working clearance below required minimum at panel — 30" required, 22" measured
Checked against: Applicable Standard
codebuddy.chatPage 1 of 4
Trusted by teams at
Three steps. Five minutes.
Submit your job, and our patent-pending AI technology reviews every photo against your standards, specs, and existing tracking.
Tell us about the job.
Project name, address in Salt Lake City, and primary trade or discipline. We look up the applicable standards and regulations automatically from the address.
Send your photos and open items.
Upload directly, share a Drive/Dropbox link, or email them over. Your existing tracking sets the bar — anything already on it doesn't count as a finding.
Our patent-pending technology and AI system analyze every photo.
Cross-references each image against your specs, the applicable standards, and your existing tracking — helping identify deviations your list may have missed.
Get your report within 24 hours*.
Each finding includes the photo, the exact location, and the code section or spec it deviates from. Sorted by severity so you know what to fix first.
Built by Code Buddy.
Code Buddy is an AI-powered compliance platform used by thousands of field professionals across construction, energy, manufacturing, and fleet operations. Our patent-pending technology checks job site photos against codes, specs, and standards — the same technology that powers this report.
Built for the people who actually do the work.
Industries supported
Report turnaround
If nothing new identified
The kind of things we help catch.
Examples based on past reports. Each finding includes the photo, location, and the reference it was checked against.
Moment frame connections at steel beam-to-column joints lack prequalified detail required for Salt Lake City Seismic Design Category D
Parapet bracing interval exceeds maximum spacing for seismic forces on unreinforced masonry along downtown commercial corridor
Fenestration area exceeds 30 percent of wall area without trade-off compliance path documentation per IECC Section C402
Rooftop air handler condensate drain not heat-traced despite Salt Lake City winter design temperature of 7 degrees F
Automatic sprinkler coverage missing in concealed combustible space above dropped ceiling in Type IIIA mixed-use building
Solar-ready conduit stub from electrical panel to roof not shown on plans as required by Salt Lake City local amendment
And only if we identify something that wasn't already on your list.
If everything identified was already on your list, you pay nothing. You keep the report either way.
GET STARTEDLimited spots each week.
Every report is reviewed by a QA professional before delivery — not just generated and sent. That human review step means we can only take a limited number of jobs per week. Submissions are reviewed in the order they're received, and we'll let you know upfront if your report will take longer than 24 hours.
Before you ask.
Does Salt Lake City have local code amendments beyond the Utah state building code?
Yes. Salt Lake City adopts additional local amendments covering solar-ready new construction, historic district facade requirements, downtown high-rise fire safety provisions, and enhanced accessibility standards for public buildings.
What seismic design category applies in Salt Lake City?
Salt Lake City is classified as Seismic Design Category D due to proximity to the Wasatch Fault and Salt Lake segment. All structures require lateral force-resisting systems designed and detailed per ASCE 7 seismic provisions.
How does Salt Lake City handle plan review for historic buildings?
Projects in Salt Lake City historic districts must comply with both building code and historic preservation standards. Alterations may use the International Existing Building Code with approval from the Historic Landmark Commission.
What does a CodeBuddy review cover for Salt Lake City permits?
For $250 with 24-hour turnaround, CodeBuddy reviews structural, mechanical, electrical, plumbing, fire protection, and energy code compliance against current Salt Lake City amendments and Utah state-adopted codes.
What snow loads apply to Salt Lake City construction?
Ground snow loads in Salt Lake City range from 25 psf in the valley to over 60 psf near the Wasatch foothills. Roof geometry, exposure, and thermal factors further adjust the design snow load per ASCE 7.