Salt Lake County, Utah
Find what your
punch list missed.
Send us photos and your tracking list. Get a written findings report within 24 hours* — before your inspector or auditor does.
— any industry with field inspections in Salt Lake County.
$250, one time · Nothing new, no charge · You keep the report either way
*Depending on availability. We'll confirm turnaround when you submit.
Salt Lake County covers unincorporated areas along the Wasatch Front in Seismic Design Category D with variable terrain from valley floor to canyon mouths. Snow loads vary widely by elevation, and wildland-urban interface zones require fire-resistant construction. The county enforces Utah-amended IBC and IRC with emphasis on grading, drainage, and hillside development. CodeBuddy reviews Salt Lake County plans for $250 with 24-hour turnaround.
Code BuddyPrepared for Acme Mechanical Inc.
Location
Salt Lake County, UT
Date
Aug 8, 2026
Trade
Electrical
Findings
Penetration seal not matching approved submittal — visible gap at fire-rated assembly
Checked against: Company SOP 4.2
Fastener pattern deviates from manufacturer data sheet — 6" OC required, measured at 9" OC
Checked against: Project Spec 08-31
Working clearance below required minimum at panel — 30" required, 22" measured
Checked against: Applicable Standard
codebuddy.chatPage 1 of 4
Trusted by teams at
Three steps. Five minutes.
Submit your job, and our patent-pending AI technology reviews every photo against your standards, specs, and existing tracking.
Tell us about the job.
Project name, address in Salt Lake County, and primary trade or discipline. We look up the applicable standards and regulations automatically from the address.
Send your photos and open items.
Upload directly, share a Drive/Dropbox link, or email them over. Your existing tracking sets the bar — anything already on it doesn't count as a finding.
Our patent-pending technology and AI system analyze every photo.
Cross-references each image against your specs, the applicable standards, and your existing tracking — helping identify deviations your list may have missed.
Get your report within 24 hours*.
Each finding includes the photo, the exact location, and the code section or spec it deviates from. Sorted by severity so you know what to fix first.
Built by Code Buddy.
Code Buddy is an AI-powered compliance platform used by thousands of field professionals across construction, energy, manufacturing, and fleet operations. Our patent-pending technology checks job site photos against codes, specs, and standards — the same technology that powers this report.
Built for the people who actually do the work.
Industries supported
Report turnaround
If nothing new identified
The kind of things we help catch.
Examples based on past reports. Each finding includes the photo, location, and the reference it was checked against.
Foundation stem wall reinforcement insufficient for Seismic Design Category D in unincorporated bench area near Big Cottonwood Canyon
Retaining wall design lacks surcharge loading from adjacent driveway on steep hillside lot above 5,000 feet elevation
HVAC equipment rated for sea-level altitude without high-altitude deration for installation at 4,800 feet in county foothills
Exterior wall assembly lacks one-hour fire rating required in Salt Lake County wildland-urban interface overlay zone
Septic system setback from seasonal high water table not verified per county health department requirements
Recessed lighting fixtures in insulated ceiling not rated IC and lack required air-seal gasket per IECC Section R402.4
And only if we identify something that wasn't already on your list.
If everything identified was already on your list, you pay nothing. You keep the report either way.
GET STARTEDLimited spots each week.
Every report is reviewed by a QA professional before delivery — not just generated and sent. That human review step means we can only take a limited number of jobs per week. Submissions are reviewed in the order they're received, and we'll let you know upfront if your report will take longer than 24 hours.
Before you ask.
What areas does Salt Lake County building jurisdiction cover?
Salt Lake County has building jurisdiction over unincorporated areas outside city limits. This includes foothill communities, canyon-adjacent properties, and rural parcels not annexed into surrounding municipalities like Draper, Sandy, or Herriman.
Does Salt Lake County have wildland-urban interface requirements?
Yes. Properties in Salt Lake County wildland-urban interface zones must use fire-resistant exterior materials, maintain defensible space, and meet ignition-resistant construction standards per the International Wildland-Urban Interface Code as adopted by Utah.
How do snow loads vary across Salt Lake County?
Ground snow loads range from 25 psf in the western valley to over 80 psf near canyon mouths and mountain benches. A geotechnical or structural engineer should verify site-specific loads for foothill and canyon properties.
How much does a CodeBuddy plan review cost for Salt Lake County projects?
CodeBuddy charges $250 for a comprehensive plan review with 24-hour turnaround. The report covers structural, mechanical, plumbing, electrical, and energy code items specific to Salt Lake County and Utah state requirements.
Are there special grading and drainage requirements in Salt Lake County?
Salt Lake County enforces grading permits for hillside lots with slopes exceeding 30 percent. Drainage plans must demonstrate stormwater management that prevents erosion and does not increase runoff to neighboring properties.