Philadelphia County, Pennsylvania
Find what your
punch list missed.
Send us photos and your tracking list. Get a written findings report within 24 hours* — before your inspector or auditor does.
— any industry with field inspections in Philadelphia County.
$250, one time · Nothing new, no charge · You keep the report either way
*Depending on availability. We'll confirm turnaround when you submit.
Philadelphia County is coterminous with the City of Philadelphia and enforces the PA UCC through the Department of Licenses and Inspections. The county's dense urban fabric of rowhomes, historic structures, and large-scale institutional projects requires careful attention to party wall conditions and accessibility upgrades. Code Buddy's Inspection Readiness Report costs $250 with 24-hour turnaround, covering L&I-specific requirements and county-wide code enforcement patterns.
Code BuddyPrepared for Acme Mechanical Inc.
Location
Philadelphia County, PA
Date
Aug 8, 2026
Trade
Electrical
Findings
Penetration seal not matching approved submittal — visible gap at fire-rated assembly
Checked against: Company SOP 4.2
Fastener pattern deviates from manufacturer data sheet — 6" OC required, measured at 9" OC
Checked against: Project Spec 08-31
Working clearance below required minimum at panel — 30" required, 22" measured
Checked against: Applicable Standard
codebuddy.chatPage 1 of 4
Trusted by teams at
Three steps. Five minutes.
Submit your job, and our patent-pending AI technology reviews every photo against your standards, specs, and existing tracking.
Tell us about the job.
Project name, address in Philadelphia County, and primary trade or discipline. We look up the applicable standards and regulations automatically from the address.
Send your photos and open items.
Upload directly, share a Drive/Dropbox link, or email them over. Your existing tracking sets the bar — anything already on it doesn't count as a finding.
Our patent-pending technology and AI system analyze every photo.
Cross-references each image against your specs, the applicable standards, and your existing tracking — helping identify deviations your list may have missed.
Get your report within 24 hours*.
Each finding includes the photo, the exact location, and the code section or spec it deviates from. Sorted by severity so you know what to fix first.
Built by Code Buddy.
Code Buddy is an AI-powered compliance platform used by thousands of field professionals across construction, energy, manufacturing, and fleet operations. Our patent-pending technology checks job site photos against codes, specs, and standards — the same technology that powers this report.
Built for the people who actually do the work.
Industries supported
Report turnaround
If nothing new identified
The kind of things we help catch.
Examples based on past reports. Each finding includes the photo, location, and the reference it was checked against.
Party wall between adjoining rowhomes lacks required 2-hour fire rating after renovation penetrations were not fire-stopped
Combined sewer lateral connection missing required backwater valve per Philadelphia County stormwater management regulations
Tenant fit-out in multi-unit building missing separate metering and disconnect per L&I requirements for each dwelling unit
Historic building adaptive reuse over 7,500 sq ft lacks automatic sprinkler system required under Philadelphia fire code amendments
Commercial renovation exceeding 50% of building value missing accessible entrance route and compliant restroom per PA UCC Chapter 11
Exterior facade repointing on pre-1950 masonry using Portland cement mortar instead of lime-based mortar compatible with historic brick
And only if we identify something that wasn't already on your list.
If everything identified was already on your list, you pay nothing. You keep the report either way.
GET STARTEDLimited spots each week.
Every report is reviewed by a QA professional before delivery — not just generated and sent. That human review step means we can only take a limited number of jobs per week. Submissions are reviewed in the order they're received, and we'll let you know upfront if your report will take longer than 24 hours.
Before you ask.
Is Philadelphia County code enforcement separate from the city?
No. Philadelphia County and the City of Philadelphia are the same jurisdiction with identical boundaries. The Department of Licenses and Inspections handles all permitting and inspections county-wide. There is no separate county building department.
What party wall requirements does the report check for Philadelphia County rowhomes?
The report verifies fire-resistance ratings of shared party walls, checks that renovation work has not compromised fire separations, and confirms penetrations are properly fire-stopped. Party wall compliance is one of the most common L&I inspection failures in the county.
Does the report address Philadelphia County's historic district requirements?
The report flags when a project falls within a designated historic district and identifies code provisions that may require Historical Commission review. Structural modifications, facade alterations, and window replacements in historic districts have additional approval steps beyond standard L&I permitting.
How much does the readiness report cost for Philadelphia County projects?
The Inspection Readiness Report is $250 flat regardless of project size or type, with delivery within 24 hours. This covers a complete PA UCC compliance review plus Philadelphia County-specific checks for L&I enforcement priorities and local amendments.
Are lead paint disclosures checked in the Philadelphia County report?
The report flags when renovation work in pre-1978 buildings triggers EPA RRP Rule requirements for lead-safe work practices. Philadelphia County has a high concentration of older housing stock, making lead paint compliance a frequent inspection and regulatory concern.
Also in Pennsylvania