Philadelphia, Pennsylvania
Find what your
punch list missed.
Send us photos and your tracking list. Get a written findings report within 24 hours* — before your inspector or auditor does.
— any industry with field inspections in Philadelphia.
$250, one time · Nothing new, no charge · You keep the report either way
*Depending on availability. We'll confirm turnaround when you submit.
Philadelphia enforces the PA Uniform Construction Code through its Department of Licenses and Inspections, one of the most active code enforcement agencies in the state. The city's aging rowhome stock, lead paint prevalence, historic overlay districts, and dense infill development create layered inspection requirements. Code Buddy's Inspection Readiness Report is $250 with 24-hour turnaround, pre-screening your plans against L&I priorities and Philadelphia-specific amendments.
Code BuddyPrepared for Acme Mechanical Inc.
Location
Philadelphia, PA
Date
Aug 8, 2026
Trade
Electrical
Findings
Penetration seal not matching approved submittal — visible gap at fire-rated assembly
Checked against: Company SOP 4.2
Fastener pattern deviates from manufacturer data sheet — 6" OC required, measured at 9" OC
Checked against: Project Spec 08-31
Working clearance below required minimum at panel — 30" required, 22" measured
Checked against: Applicable Standard
codebuddy.chatPage 1 of 4
Trusted by teams at
Three steps. Five minutes.
Submit your job, and our patent-pending AI technology reviews every photo against your standards, specs, and existing tracking.
Tell us about the job.
Project name, address in Philadelphia, and primary trade or discipline. We look up the applicable standards and regulations automatically from the address.
Send your photos and open items.
Upload directly, share a Drive/Dropbox link, or email them over. Your existing tracking sets the bar — anything already on it doesn't count as a finding.
Our patent-pending technology and AI system analyze every photo.
Cross-references each image against your specs, the applicable standards, and your existing tracking — helping identify deviations your list may have missed.
Get your report within 24 hours*.
Each finding includes the photo, the exact location, and the code section or spec it deviates from. Sorted by severity so you know what to fix first.
Built by Code Buddy.
Code Buddy is an AI-powered compliance platform used by thousands of field professionals across construction, energy, manufacturing, and fleet operations. Our patent-pending technology checks job site photos against codes, specs, and standards — the same technology that powers this report.
Built for the people who actually do the work.
Industries supported
Report turnaround
If nothing new identified
The kind of things we help catch.
Examples based on past reports. Each finding includes the photo, location, and the reference it was checked against.
Replacement water service line using lead solder connections in violation of Philadelphia lead-free plumbing requirements for potable water systems
Rowhome rear addition bearing on existing party wall without structural analysis demonstrating adequate load capacity for new loads
Knob-and-tube wiring in occupied ceiling cavity covered with blown insulation creating fire hazard per NEC 394.12
Gas furnace flue liner in unlined masonry chimney not relined with approved UL-listed liner per Philadelphia mechanical code
Third-floor bedroom window sill height at 48 inches exceeds maximum 44 inches for emergency escape and rescue opening
Rear yard setback for new construction at 8 feet does not meet 10-foot minimum required in Philadelphia RSA-5 zoning district
And only if we identify something that wasn't already on your list.
If everything identified was already on your list, you pay nothing. You keep the report either way.
GET STARTEDLimited spots each week.
Every report is reviewed by a QA professional before delivery — not just generated and sent. That human review step means we can only take a limited number of jobs per week. Submissions are reviewed in the order they're received, and we'll let you know upfront if your report will take longer than 24 hours.
Before you ask.
How does Philadelphia L&I enforcement differ from other PA jurisdictions?
Philadelphia L&I is one of the few municipal departments in PA that performs all inspections in-house rather than relying on third-party agencies. The department enforces the PA UCC with local amendments and maintains strict scheduling requirements that can delay projects if violations are found.
Does the report flag lead paint and asbestos concerns in Philadelphia rowhomes?
Yes. For pre-1978 buildings, the report identifies work that triggers EPA RRP Rule lead-safe practices and flags potential asbestos-containing materials in older finishes. Philadelphia's housing stock predates modern construction standards, making hazardous material awareness critical for renovation permits.
What historic district requirements apply to Philadelphia projects?
Projects within Philadelphia's historic overlay districts require Historical Commission approval for exterior alterations including windows, doors, facades, and rooflines. The report identifies when your project address falls within a registered district and flags work items likely to need commission review.
Can I use a third-party inspector for my Philadelphia project?
Unlike most PA municipalities, Philadelphia primarily uses its own L&I inspectors rather than third-party agencies for residential and commercial inspections. The readiness report helps you prepare specifically for L&I inspector expectations and common citation patterns.
What is included in the $250 Philadelphia Inspection Readiness Report?
The report reviews your plans against PA UCC requirements plus Philadelphia-specific amendments, L&I enforcement patterns, zoning overlay compliance, and historic district triggers. It is delivered within 24 hours and identifies the issues most likely to cause inspection delays or failures.
Also in Pennsylvania