Erie, Pennsylvania
Find what your
punch list missed.
Send us photos and your tracking list. Get a written findings report within 24 hours* — before your inspector or auditor does.
— any industry with field inspections in Erie.
$250, one time · Nothing new, no charge · You keep the report either way
*Depending on availability. We'll confirm turnaround when you submit.
Erie enforces the PA Uniform Construction Code under conditions shaped by Lake Erie's extreme lake-effect snowfall and waterfront exposure. Roof snow loads, ice damming, and moisture intrusion from Great Lakes humidity are persistent inspection concerns in this region. Code Buddy's Inspection Readiness Report is $250 with 24-hour turnaround, identifying structural and weatherproofing issues specific to Erie's demanding climate before your scheduled inspection.
Code BuddyPrepared for Acme Mechanical Inc.
Location
Erie, PA
Date
Aug 8, 2026
Trade
Electrical
Findings
Penetration seal not matching approved submittal — visible gap at fire-rated assembly
Checked against: Company SOP 4.2
Fastener pattern deviates from manufacturer data sheet — 6" OC required, measured at 9" OC
Checked against: Project Spec 08-31
Working clearance below required minimum at panel — 30" required, 22" measured
Checked against: Applicable Standard
codebuddy.chatPage 1 of 4
Trusted by teams at
Three steps. Five minutes.
Submit your job, and our patent-pending AI technology reviews every photo against your standards, specs, and existing tracking.
Tell us about the job.
Project name, address in Erie, and primary trade or discipline. We look up the applicable standards and regulations automatically from the address.
Send your photos and open items.
Upload directly, share a Drive/Dropbox link, or email them over. Your existing tracking sets the bar — anything already on it doesn't count as a finding.
Our patent-pending technology and AI system analyze every photo.
Cross-references each image against your specs, the applicable standards, and your existing tracking — helping identify deviations your list may have missed.
Get your report within 24 hours*.
Each finding includes the photo, the exact location, and the code section or spec it deviates from. Sorted by severity so you know what to fix first.
Built by Code Buddy.
Code Buddy is an AI-powered compliance platform used by thousands of field professionals across construction, energy, manufacturing, and fleet operations. Our patent-pending technology checks job site photos against codes, specs, and standards — the same technology that powers this report.
Built for the people who actually do the work.
Industries supported
Report turnaround
If nothing new identified
The kind of things we help catch.
Examples based on past reports. Each finding includes the photo, location, and the reference it was checked against.
Roof framing designed for 30 psf ground snow load but Erie lake-effect zone requires minimum 50 psf per PA UCC Table 1608.2
Ice and water shield membrane not extended 24 inches past interior wall line as required for Erie's severe ice dam conditions
Waterfront commercial HVAC condensing units lack corrosion-resistant coatings for Lake Erie salt spray and humidity exposure
Exterior hose bibb supply lines in unheated crawlspace missing freeze protection insulation for Erie winter conditions
Marina-adjacent building service entrance raceway not rated for damp location despite bayfront moisture exposure
Above-grade wall cavity insulation at R-19 does not meet R-20 continuous plus R-13 cavity requirement for climate zone 5A lakefront
And only if we identify something that wasn't already on your list.
If everything identified was already on your list, you pay nothing. You keep the report either way.
GET STARTEDLimited spots each week.
Every report is reviewed by a QA professional before delivery — not just generated and sent. That human review step means we can only take a limited number of jobs per week. Submissions are reviewed in the order they're received, and we'll let you know upfront if your report will take longer than 24 hours.
Before you ask.
What snow load requirements apply to buildings in Erie?
Erie's lake-effect snow zone requires significantly higher ground snow loads than most of Pennsylvania, often 50 psf or more depending on site elevation and proximity to the lake. The report checks your structural drawings against the specific design snow load for your Erie building site.
Does Erie accept third-party inspection agencies under PA UCC?
Yes. Erie property owners may hire a PA-approved third-party agency to perform plan review and inspections for both residential and commercial work. The agency must be registered with the Department of Labor and Industry and carry required insurance.
How does the report address ice damming concerns specific to Erie?
The report verifies ice barrier membrane extends the code-required distance past the interior wall line and checks ventilation ratios in attic spaces. Erie's combination of heavy snowfall and temperature fluctuations makes ice dam prevention a frequent inspection focus.
Are there additional requirements for buildings near Erie's waterfront?
Waterfront properties in Erie may fall within coastal high-hazard or flood zones requiring elevated construction, breakaway walls, and flood-resistant materials. The report flags applicable FEMA zone requirements and checks mechanical equipment placement relative to flood elevation.
What does the $250 Inspection Readiness Report include for Erie projects?
The report covers a full code compliance review against current PA UCC requirements with Erie-specific checks for snow loading, ice protection, wind exposure from Lake Erie, and moisture management. Results are delivered within 24 hours of plan submission.
Also in Pennsylvania