Buffalo, New York
Find what your
punch list missed.
Send us photos and your tracking list. Get a written findings report within 24 hours* — before your inspector or auditor does.
— any industry with field inspections in Buffalo.
$250, one time · Nothing new, no charge · You keep the report either way
*Depending on availability. We'll confirm turnaround when you submit.
Buffalo construction is governed by the 2020 NY Uniform Code with local enforcement through the Buffalo Building Department. Lake-effect snow loads exceeding 90 psf and harsh freeze-thaw cycles make structural and envelope detailing critical in this region. Code Buddy's Inspection Readiness Report for Buffalo costs $250 with 24-hour turnaround, catching load path and weatherization issues common in Western New York before inspection day.
Code BuddyPrepared for Acme Mechanical Inc.
Location
Buffalo, NY
Date
Aug 8, 2026
Trade
Electrical
Findings
Penetration seal not matching approved submittal — visible gap at fire-rated assembly
Checked against: Company SOP 4.2
Fastener pattern deviates from manufacturer data sheet — 6" OC required, measured at 9" OC
Checked against: Project Spec 08-31
Working clearance below required minimum at panel — 30" required, 22" measured
Checked against: Applicable Standard
codebuddy.chatPage 1 of 4
Trusted by teams at
Three steps. Five minutes.
Submit your job, and our patent-pending AI technology reviews every photo against your standards, specs, and existing tracking.
Tell us about the job.
Project name, address in Buffalo, and primary trade or discipline. We look up the applicable standards and regulations automatically from the address.
Send your photos and open items.
Upload directly, share a Drive/Dropbox link, or email them over. Your existing tracking sets the bar — anything already on it doesn't count as a finding.
Our patent-pending technology and AI system analyze every photo.
Cross-references each image against your specs, the applicable standards, and your existing tracking — helping identify deviations your list may have missed.
Get your report within 24 hours*.
Each finding includes the photo, the exact location, and the code section or spec it deviates from. Sorted by severity so you know what to fix first.
Built by Code Buddy.
Code Buddy is an AI-powered compliance platform used by thousands of field professionals across construction, energy, manufacturing, and fleet operations. Our patent-pending technology checks job site photos against codes, specs, and standards — the same technology that powers this report.
Built for the people who actually do the work.
Industries supported
Report turnaround
If nothing new identified
The kind of things we help catch.
Examples based on past reports. Each finding includes the photo, location, and the reference it was checked against.
Roof framing not designed for Buffalo's 90 psf ground snow load with required drift surcharge at parapet walls
Ice and water shield membrane extends only 12 inches past interior wall line where 24-inch minimum is needed for lake-effect zones
Furnace combustion air intake positioned on Lake Erie windward side without wind-driven rain protection louver
Exterior receptacle on converted industrial loft building lacks weatherproof while-in-use cover rated for wet location
Continuous exterior insulation missing at steel stud wall assembly creating thermal bridging in Buffalo's Climate Zone 5A
Footing depth is 36 inches where Buffalo's frost depth requires minimum 48 inches below finished grade
And only if we identify something that wasn't already on your list.
If everything identified was already on your list, you pay nothing. You keep the report either way.
GET STARTEDLimited spots each week.
Every report is reviewed by a QA professional before delivery — not just generated and sent. That human review step means we can only take a limited number of jobs per week. Submissions are reviewed in the order they're received, and we'll let you know upfront if your report will take longer than 24 hours.
Before you ask.
What snow load does Buffalo require for roof design?
Buffalo's ground snow load is among the highest in New York at approximately 90 psf, driven by Lake Erie lake-effect weather. Drift loads at parapets and roof transitions can push localized loads significantly higher. Code Buddy flags undersized framing.
How does Code Buddy handle Buffalo's older industrial buildings?
Many Buffalo projects involve adaptive reuse of former manufacturing and warehouse buildings. The report checks against Existing Building Code provisions for change-of-occupancy, fire separation upgrades, and structural adequacy for new loading conditions.
What is included in the $250 Inspection Readiness Report?
The report reviews your plans against the NY Uniform Code, NYSERDA energy requirements, and Buffalo-specific climate considerations. It is delivered within 24 hours and prioritizes findings by inspection failure risk.
Does the report cover Buffalo's energy code requirements?
Yes. Buffalo is in Climate Zone 5A under the NYSERDA code, requiring high-performance insulation, air barriers, and efficient mechanical systems. The report checks envelope R-values, window specifications, and HVAC efficiency ratings.
What frost depth does Buffalo require for foundations?
Buffalo requires a minimum frost depth of 48 inches for footings due to extreme winter ground freezing. Shallow foundations are a common rejection item. Code Buddy verifies footing depths and frost protection details in your plans.
Also in New York