Electrical · Buffalo, New York
Electrical inspection readiness
for Buffalo.
Send us photos of your electrical work and your tracking list. Get a written findings report within 24 hours* — before your inspector does.
Panels, wiring, conduit, grounding, AFCI/GFCI, service equipment, and NEC compliance.
$250, one time · Nothing new, no charge · You keep the report either way
*Depending on availability. We'll confirm turnaround when you submit.
Code Buddy's Inspection Readiness Report checks your electrical work in Buffalo, New York against the codes and specs that apply. Send photos of panels, wiring, conduit, grounding, afci/gfci, service equipment, and nec compliance and your tracking list — get a written findings report within 24 hours* scoring every item. $250, one time — nothing new found, no charge.
Trusted by teams at
Common questions
What teams ask about electrical inspections in Buffalo
These are the questions field teams ask before an inspection. Our report answers all of them for your specific job.
how do I prepare for an electrical inspection in Buffalo?
electrical inspection checklist in Buffalo?
what do electrical inspectors look for in Buffalo?
pre-inspection review electrical in Buffalo?
electrical rough-in inspection prep in Buffalo?
Three steps. Five minutes.
Submit your electrical job, and our patent-pending AI reviews every photo against the standards that apply in Buffalo.
Tell us about your electrical job.
Project name, address in Buffalo, and scope. We look up the applicable standards automatically.
Send photos of your electrical work.
Upload directly, share a Drive/Dropbox link, or email them. Your existing tracking sets the bar.
AI reviews every photo.
Cross-references against codes, specs, and your tracking — flagging electrical deviations your list missed.
Get your report within 24 hours*.
Each finding includes the photo, location, and reference. Sorted by severity.
Electrical findings we help catch in Buffalo.
Examples based on past reports — each includes the photo, location, and the reference checked against.
Roof framing not designed for Buffalo's 90 psf ground snow load with required drift surcharge at parapet walls
Furnace combustion air intake positioned on Lake Erie windward side without wind-driven rain protection louver
Exterior receptacle on converted industrial loft building lacks weatherproof while-in-use cover rated for wet location
Continuous exterior insulation missing at steel stud wall assembly creating thermal bridging in Buffalo's Climate Zone 5A
Footing depth is 36 inches where Buffalo's frost depth requires minimum 48 inches below finished grade
And only if we identify something that wasn't already on your list.
If everything identified was already on your list, you pay nothing. You keep the report either way.
GET YOUR ELECTRICAL REPORTLimited spots each week.
Every report is reviewed by a QA professional before delivery. Submissions are reviewed in order received.