Albany, New York
Find what your
punch list missed.
Send us photos and your tracking list. Get a written findings report within 24 hours* — before your inspector or auditor does.
— any industry with field inspections in Albany.
$250, one time · Nothing new, no charge · You keep the report either way
*Depending on availability. We'll confirm turnaround when you submit.
Albany projects fall under the 2020 NY Uniform Code, with local enforcement through the Albany Building Department. The capital region's older masonry buildings and heavy snow loads demand careful structural and weatherproofing review. Code Buddy's Inspection Readiness Report for Albany costs $250 with 24-hour turnaround, flagging issues specific to Hudson Valley climate and aging government-district building stock before your inspector arrives.
Code BuddyPrepared for Acme Mechanical Inc.
Location
Albany, NY
Date
Aug 8, 2026
Trade
Electrical
Findings
Penetration seal not matching approved submittal — visible gap at fire-rated assembly
Checked against: Company SOP 4.2
Fastener pattern deviates from manufacturer data sheet — 6" OC required, measured at 9" OC
Checked against: Project Spec 08-31
Working clearance below required minimum at panel — 30" required, 22" measured
Checked against: Applicable Standard
codebuddy.chatPage 1 of 4
Trusted by teams at
Three steps. Five minutes.
Submit your job, and our patent-pending AI technology reviews every photo against your standards, specs, and existing tracking.
Tell us about the job.
Project name, address in Albany, and primary trade or discipline. We look up the applicable standards and regulations automatically from the address.
Send your photos and open items.
Upload directly, share a Drive/Dropbox link, or email them over. Your existing tracking sets the bar — anything already on it doesn't count as a finding.
Our patent-pending technology and AI system analyze every photo.
Cross-references each image against your specs, the applicable standards, and your existing tracking — helping identify deviations your list may have missed.
Get your report within 24 hours*.
Each finding includes the photo, the exact location, and the code section or spec it deviates from. Sorted by severity so you know what to fix first.
Built by Code Buddy.
Code Buddy is an AI-powered compliance platform used by thousands of field professionals across construction, energy, manufacturing, and fleet operations. Our patent-pending technology checks job site photos against codes, specs, and standards — the same technology that powers this report.
Built for the people who actually do the work.
Industries supported
Report turnaround
If nothing new identified
The kind of things we help catch.
Examples based on past reports. Each finding includes the photo, location, and the reference it was checked against.
Roof truss connections lack reinforcement for Albany's 40 psf ground snow load per NY Uniform Code Table 1608.1
Repointing mortar on historic brick facade does not match original lime-based mix required by Albany preservation guidelines
Boiler flue clearance to combustibles is 4 inches where 6 inches is required for gas-fired heating equipment
Panel bonding jumper missing on 200A service upgrade in pre-war residential building with older grounding system
Exterior hose bibb lacks freeze-proof sillcock installation despite Albany's extended below-freezing winter season
Wall cavity insulation R-value is R-13 where NYSERDA energy code requires R-20 for Climate Zone 5A
And only if we identify something that wasn't already on your list.
If everything identified was already on your list, you pay nothing. You keep the report either way.
GET STARTEDLimited spots each week.
Every report is reviewed by a QA professional before delivery — not just generated and sent. That human review step means we can only take a limited number of jobs per week. Submissions are reviewed in the order they're received, and we'll let you know upfront if your report will take longer than 24 hours.
Before you ask.
What building code does Albany enforce?
Albany enforces the 2020 New York State Uniform Fire Prevention and Building Code, which is based on the IBC and IRC. The Albany Building Department handles local plan review and inspections for all permit types.
How does Albany's snow load affect my project?
Albany's design ground snow load is approximately 40 psf under the NY Uniform Code. Roofs, decks, and canopies must be engineered for this load. Code Buddy checks your structural details against these regional requirements.
What does the $250 Inspection Readiness Report include?
The report reviews your submitted plans and documents against applicable NY Uniform Code sections, NYSERDA energy requirements, and Albany-specific enforcement patterns. You receive it within 24 hours with prioritized findings.
Are there special requirements for older buildings in Albany?
Yes. Many Albany buildings predate modern codes and may trigger Existing Building Code of New York State provisions. Structural upgrades, lead paint, asbestos abatement, and fire escape compliance are common issues on renovation projects.
Does Code Buddy cover NYSERDA energy code for Albany projects?
Yes. Albany falls in Climate Zone 5A under the NYSERDA Energy Conservation Construction Code. The report checks insulation values, window U-factors, air sealing, and mechanical efficiency against current thresholds.
Also in New York