Bloomington, Minnesota
Find what your
punch list missed.
Send us photos and your tracking list. Get a written findings report within 24 hours* — before your inspector or auditor does.
— any industry with field inspections in Bloomington.
$250, one time · Nothing new, no charge · You keep the report either way
*Depending on availability. We'll confirm turnaround when you submit.
The Bloomington Inspection Readiness Report is a $250 one-time service with 24-hour turnaround. Submit your jobsite photos and tracking list, and receive findings before the inspector arrives. Bloomington enforces the Minnesota State Building Code and sits in a zone requiring 42-inch minimum frost depth for footings. The city's large commercial properties, including the Mall of America corridor, drive strict enforcement of accessibility and fire-protection standards.
Code BuddyPrepared for Acme Mechanical Inc.
Location
Bloomington, MN
Date
Aug 8, 2026
Trade
Electrical
Findings
Penetration seal not matching approved submittal — visible gap at fire-rated assembly
Checked against: Company SOP 4.2
Fastener pattern deviates from manufacturer data sheet — 6" OC required, measured at 9" OC
Checked against: Project Spec 08-31
Working clearance below required minimum at panel — 30" required, 22" measured
Checked against: Applicable Standard
codebuddy.chatPage 1 of 4
Trusted by teams at
Three steps. Five minutes.
Submit your job, and our patent-pending AI technology reviews every photo against your standards, specs, and existing tracking.
Tell us about the job.
Project name, address in Bloomington, and primary trade or discipline. We look up the applicable standards and regulations automatically from the address.
Send your photos and open items.
Upload directly, share a Drive/Dropbox link, or email them over. Your existing tracking sets the bar — anything already on it doesn't count as a finding.
Our patent-pending technology and AI system analyze every photo.
Cross-references each image against your specs, the applicable standards, and your existing tracking — helping identify deviations your list may have missed.
Get your report within 24 hours*.
Each finding includes the photo, the exact location, and the code section or spec it deviates from. Sorted by severity so you know what to fix first.
Built by Code Buddy.
Code Buddy is an AI-powered compliance platform used by thousands of field professionals across construction, energy, manufacturing, and fleet operations. Our patent-pending technology checks job site photos against codes, specs, and standards — the same technology that powers this report.
Built for the people who actually do the work.
Industries supported
Report turnaround
If nothing new identified
The kind of things we help catch.
Examples based on past reports. Each finding includes the photo, location, and the reference it was checked against.
Footing depth measured at 38 inches, does not meet Bloomington's 42-inch minimum frost depth requirement
Rooftop unit condensate drain line not heat-traced or insulated for Minnesota freeze protection
Tamper-resistant receptacles not installed in dwelling unit as required by Minnesota Electrical Code
Continuous insulation not maintained at cantilevered floor over unheated space per energy code
Water supply piping in exterior wall cavity not insulated against freezing per Minnesota amendment
Exit sign illumination below minimum one foot-candle at floor level in commercial corridor
And only if we identify something that wasn't already on your list.
If everything identified was already on your list, you pay nothing. You keep the report either way.
GET STARTEDLimited spots each week.
Every report is reviewed by a QA professional before delivery — not just generated and sent. That human review step means we can only take a limited number of jobs per week. Submissions are reviewed in the order they're received, and we'll let you know upfront if your report will take longer than 24 hours.
Before you ask.
What building code does Bloomington, Minnesota enforce?
Bloomington enforces the Minnesota State Building Code, which adopts the International Building Code with state-specific amendments. Minnesota amendments address cold-climate concerns including frost depth, ice dam prevention, and freeze protection for water piping.
What is the frost depth requirement in Bloomington?
Bloomington requires a minimum 42-inch footing depth below finished grade. Inspectors verify depth before concrete placement, and footings found above this depth are rejected regardless of soil conditions.
How does the $250 Bloomington readiness report work?
You submit photos of your jobsite and your inspection tracking list. Within 24 hours, you receive a report identifying probable findings. This lets you address corrections before the Bloomington inspector visits your project.
What are common inspection failures in Bloomington?
Frequent failures include shallow footings below the 42-inch frost line, uninsulated water piping in exterior walls, missing freeze protection on condensate lines, and incomplete continuous insulation at thermal bridging points.
Does Bloomington have commercial inspection requirements beyond the state code?
Bloomington follows the Minnesota State Building Code for commercial projects with attention to accessibility, fire-protection, and energy code compliance. The city's commercial corridor properties receive thorough review of egress and rated assembly details.
Also in Minnesota