Saint Paul, Minnesota
Find what your
punch list missed.
Send us photos and your tracking list. Get a written findings report within 24 hours* — before your inspector or auditor does.
— any industry with field inspections in Saint Paul.
$250, one time · Nothing new, no charge · You keep the report either way
*Depending on availability. We'll confirm turnaround when you submit.
The Saint Paul Inspection Readiness Report is a $250 one-time service with 24-hour turnaround. Submit your jobsite photos and tracking list, and receive findings before the inspector arrives. As Minnesota's capital, Saint Paul enforces the Minnesota State Building Code through its Department of Safety and Inspections. The city's historic Summit Avenue district and aging housing stock mean inspectors frequently encounter lead paint, balloon-frame walls, and non-compliant egress in renovation projects.
Code BuddyPrepared for Acme Mechanical Inc.
Location
Saint Paul, MN
Date
Aug 8, 2026
Trade
Electrical
Findings
Penetration seal not matching approved submittal — visible gap at fire-rated assembly
Checked against: Company SOP 4.2
Fastener pattern deviates from manufacturer data sheet — 6" OC required, measured at 9" OC
Checked against: Project Spec 08-31
Working clearance below required minimum at panel — 30" required, 22" measured
Checked against: Applicable Standard
codebuddy.chatPage 1 of 4
Trusted by teams at
Three steps. Five minutes.
Submit your job, and our patent-pending AI technology reviews every photo against your standards, specs, and existing tracking.
Tell us about the job.
Project name, address in Saint Paul, and primary trade or discipline. We look up the applicable standards and regulations automatically from the address.
Send your photos and open items.
Upload directly, share a Drive/Dropbox link, or email them over. Your existing tracking sets the bar — anything already on it doesn't count as a finding.
Our patent-pending technology and AI system analyze every photo.
Cross-references each image against your specs, the applicable standards, and your existing tracking — helping identify deviations your list may have missed.
Get your report within 24 hours*.
Each finding includes the photo, the exact location, and the code section or spec it deviates from. Sorted by severity so you know what to fix first.
Built by Code Buddy.
Code Buddy is an AI-powered compliance platform used by thousands of field professionals across construction, energy, manufacturing, and fleet operations. Our patent-pending technology checks job site photos against codes, specs, and standards — the same technology that powers this report.
Built for the people who actually do the work.
Industries supported
Report turnaround
If nothing new identified
The kind of things we help catch.
Examples based on past reports. Each finding includes the photo, location, and the reference it was checked against.
Lead paint stabilization not documented before disturbance of pre-1978 painted surfaces in Saint Paul renovation
Balloon-frame exterior wall lacking required fire blocking at floor line between first and second story
Ungrounded two-prong receptacles not upgraded to GFCI protection where accessible in renovated space
Galvanized steel water supply piping not replaced when exposed during kitchen renovation scope of work
Hydronic boiler relief valve discharge pipe not piped to within 6 inches of floor or drain
Interconnected smoke detectors not extended to cover newly finished attic bedroom space
And only if we identify something that wasn't already on your list.
If everything identified was already on your list, you pay nothing. You keep the report either way.
GET STARTEDLimited spots each week.
Every report is reviewed by a QA professional before delivery — not just generated and sent. That human review step means we can only take a limited number of jobs per week. Submissions are reviewed in the order they're received, and we'll let you know upfront if your report will take longer than 24 hours.
Before you ask.
Does Saint Paul have special requirements for historic district renovations?
Yes. Saint Paul's Heritage Preservation Commission reviews exterior changes in historic districts, and the building department enforces current code for all renovated systems. Lead paint, balloon framing, and non-compliant egress are common triggers during permit inspections.
What code does Saint Paul enforce?
Saint Paul enforces the Minnesota State Building Code through its Department of Safety and Inspections. The city applies the code with attention to its older housing stock, requiring current-code compliance for all work within the scope of renovation permits.
How does the $250 Saint Paul readiness report work?
You submit jobsite photos and your tracking list. Within 24 hours, you receive a findings report covering all trades. Saint Paul's inspection scheduling requires advance booking, so passing on the first visit avoids significant project delays.
What are the most common Saint Paul inspection failures?
Frequent failures include undocumented lead paint disturbance, missing fire blocking in balloon-frame walls, ungrounded receptacles without GFCI upgrade, and galvanized piping not replaced when exposed during renovation work.
Does Saint Paul require lead paint testing during renovations?
Saint Paul requires that pre-1978 structures have lead paint assessed before disturbing painted surfaces. Contractors must follow EPA RRP rule requirements, and inspectors verify documentation of lead-safe work practices during renovation inspections.
Also in Minnesota