Duluth, Minnesota
Find what your
punch list missed.
Send us photos and your tracking list. Get a written findings report within 24 hours* — before your inspector or auditor does.
— any industry with field inspections in Duluth.
$250, one time · Nothing new, no charge · You keep the report either way
*Depending on availability. We'll confirm turnaround when you submit.
The Duluth Inspection Readiness Report is a $250 one-time service with 24-hour turnaround. Submit your jobsite photos and tracking list, and receive findings before the inspector arrives. Duluth sits on the western tip of Lake Superior where extreme cold, heavy snow loads, and ice dam conditions create demanding inspection environments. The city enforces the Minnesota State Building Code with frost depths reaching 60 inches in exposed lakefront locations.
Code BuddyPrepared for Acme Mechanical Inc.
Location
Duluth, MN
Date
Aug 8, 2026
Trade
Electrical
Findings
Penetration seal not matching approved submittal — visible gap at fire-rated assembly
Checked against: Company SOP 4.2
Fastener pattern deviates from manufacturer data sheet — 6" OC required, measured at 9" OC
Checked against: Project Spec 08-31
Working clearance below required minimum at panel — 30" required, 22" measured
Checked against: Applicable Standard
codebuddy.chatPage 1 of 4
Trusted by teams at
Three steps. Five minutes.
Submit your job, and our patent-pending AI technology reviews every photo against your standards, specs, and existing tracking.
Tell us about the job.
Project name, address in Duluth, and primary trade or discipline. We look up the applicable standards and regulations automatically from the address.
Send your photos and open items.
Upload directly, share a Drive/Dropbox link, or email them over. Your existing tracking sets the bar — anything already on it doesn't count as a finding.
Our patent-pending technology and AI system analyze every photo.
Cross-references each image against your specs, the applicable standards, and your existing tracking — helping identify deviations your list may have missed.
Get your report within 24 hours*.
Each finding includes the photo, the exact location, and the code section or spec it deviates from. Sorted by severity so you know what to fix first.
Built by Code Buddy.
Code Buddy is an AI-powered compliance platform used by thousands of field professionals across construction, energy, manufacturing, and fleet operations. Our patent-pending technology checks job site photos against codes, specs, and standards — the same technology that powers this report.
Built for the people who actually do the work.
Industries supported
Report turnaround
If nothing new identified
The kind of things we help catch.
Examples based on past reports. Each finding includes the photo, location, and the reference it was checked against.
Roof design snow load calculation does not account for Duluth's 60 psf ground snow load requirement
Ice-and-water shield not extended minimum 24 inches past interior wall line at all eave conditions
Water service line burial depth only 60 inches, below Duluth's 72-inch recommended depth for lakefront parcels
Exterior ductwork penetration not sealed with weatherproof boot rated for negative 30 degree exposure
Outdoor panel enclosure not rated NEMA 3R for Duluth's wind-driven rain and ice conditions
Wet fire sprinkler piping in unheated dock loading area subject to freezing without antifreeze loop
And only if we identify something that wasn't already on your list.
If everything identified was already on your list, you pay nothing. You keep the report either way.
GET STARTEDLimited spots each week.
Every report is reviewed by a QA professional before delivery — not just generated and sent. That human review step means we can only take a limited number of jobs per week. Submissions are reviewed in the order they're received, and we'll let you know upfront if your report will take longer than 24 hours.
Before you ask.
What snow load does Duluth require for roof design?
Duluth requires a minimum 60 psf ground snow load for structural design, among the highest in Minnesota. Exposed lakefront sites and areas subject to drifting may require higher loads per the structural engineer's site-specific analysis.
What is the frost depth for footings in Duluth?
Duluth requires a minimum 48-inch frost depth per Minnesota code, but lakefront and exposed hillside sites commonly require 60 inches or more. Inspectors verify footing depth documentation before approving concrete placement.
How does the $250 Duluth readiness report work?
Submit your jobsite photos and tracking list. Within 24 hours, you receive a findings report covering all trades. Duluth's limited inspector availability makes first-pass success especially important to avoid multi-week rescheduling delays.
What are the most common Duluth inspection failures?
Common failures include inadequate ice-and-water shield coverage, shallow footings on sloped lakefront lots, unprotected water piping in exterior walls, and snow load documentation gaps. Ice dam prevention details are closely reviewed.
Does Duluth have special requirements for lakefront construction?
Duluth lakefront properties face deeper frost depths, higher wind exposure, and stricter erosion control requirements. Inspectors verify that foundations, drainage, and shoreline setbacks meet both Minnesota Building Code and Duluth zoning standards.
Also in Minnesota