Ann Arbor, Michigan
Find what your
punch list missed.
Send us photos and your tracking list. Get a written findings report within 24 hours* — before your inspector or auditor does.
— any industry with field inspections in Ann Arbor.
$250, one time · Nothing new, no charge · You keep the report either way
*Depending on availability. We'll confirm turnaround when you submit.
The Ann Arbor Inspection Readiness Report is a one-time $250 service with 24-hour turnaround. You submit jobsite photos and your tracking list, and receive a findings report before the inspector arrives. Ann Arbor enforces Michigan Building Code with local energy-efficiency amendments tied to the city's climate action plan, and inspectors pay close attention to insulation continuity and air sealing in this freeze-thaw climate.
Code BuddyPrepared for Acme Mechanical Inc.
Location
Ann Arbor, MI
Date
Aug 8, 2026
Trade
Electrical
Findings
Penetration seal not matching approved submittal — visible gap at fire-rated assembly
Checked against: Company SOP 4.2
Fastener pattern deviates from manufacturer data sheet — 6" OC required, measured at 9" OC
Checked against: Project Spec 08-31
Working clearance below required minimum at panel — 30" required, 22" measured
Checked against: Applicable Standard
codebuddy.chatPage 1 of 4
Trusted by teams at
Three steps. Five minutes.
Submit your job, and our patent-pending AI technology reviews every photo against your standards, specs, and existing tracking.
Tell us about the job.
Project name, address in Ann Arbor, and primary trade or discipline. We look up the applicable standards and regulations automatically from the address.
Send your photos and open items.
Upload directly, share a Drive/Dropbox link, or email them over. Your existing tracking sets the bar — anything already on it doesn't count as a finding.
Our patent-pending technology and AI system analyze every photo.
Cross-references each image against your specs, the applicable standards, and your existing tracking — helping identify deviations your list may have missed.
Get your report within 24 hours*.
Each finding includes the photo, the exact location, and the code section or spec it deviates from. Sorted by severity so you know what to fix first.
Built by Code Buddy.
Code Buddy is an AI-powered compliance platform used by thousands of field professionals across construction, energy, manufacturing, and fleet operations. Our patent-pending technology checks job site photos against codes, specs, and standards — the same technology that powers this report.
Built for the people who actually do the work.
Industries supported
Report turnaround
If nothing new identified
The kind of things we help catch.
Examples based on past reports. Each finding includes the photo, location, and the reference it was checked against.
GFCI protection missing on kitchen countertop receptacles within 6 feet of sink basin
Furnace combustion air intake located too close to grade for Ann Arbor snow drift accumulation zone
Continuous air barrier not sealed at rim joist per Ann Arbor energy amendment requirements
Water heater expansion tank not installed on closed-loop domestic water system
Foundation wall step crack at frost line consistent with freeze-thaw cycling damage
Smoke detector in basement missing interconnection wiring to upper-floor units
And only if we identify something that wasn't already on your list.
If everything identified was already on your list, you pay nothing. You keep the report either way.
GET STARTEDLimited spots each week.
Every report is reviewed by a QA professional before delivery — not just generated and sent. That human review step means we can only take a limited number of jobs per week. Submissions are reviewed in the order they're received, and we'll let you know upfront if your report will take longer than 24 hours.
Before you ask.
What code does Ann Arbor enforce for residential construction?
Ann Arbor enforces the Michigan Residential Code with local amendments that add stricter energy-efficiency standards. The city's sustainability goals drive additional air-sealing and insulation requirements beyond the base state code.
How do I schedule an inspection with the Ann Arbor Building Department?
Ann Arbor uses an online portal for inspection scheduling. Requests must be submitted by 4 PM the business day prior. A readiness report for $250 helps ensure you pass on the first attempt.
What are the most common inspection failures in Ann Arbor?
Common failures include incomplete air barrier detailing at rim joists, missing GFCI protection in wet locations, and inadequate combustion air provisions for gas appliances. Foundation issues from freeze-thaw cycles also draw corrections.
Does the $250 report replace an official Ann Arbor inspection?
No. The Inspection Readiness Report is a pre-inspection review that identifies likely findings before your scheduled inspection. It does not replace the official inspection required by the Ann Arbor Building Department.
How quickly do I get my report back?
Reports are returned within 24 hours of submitting your photos and tracking list. Most reports are delivered the same business day, giving you time to address findings before the inspector visits.
Also in Michigan