Vancouver, Washington
Find what your
punch list missed.
Send us photos and your tracking list. Get a written findings report within 24 hours* — before your inspector or auditor does.
— any industry with field inspections in Vancouver.
$250, one time · Nothing new, no charge · You keep the report either way
*Depending on availability. We'll confirm turnaround when you submit.
Vancouver, Washington enforces the Washington State Building Code at the Oregon border, where Columbia River flood plains and Cascadia subduction zone seismic hazards shape construction requirements. The city's proximity to Portland creates cross-border contractor traffic requiring familiarity with Washington-specific energy code and seismic provisions distinct from Oregon. CodeBuddy reviews your Vancouver plans for $250 with 24-hour turnaround.
Code BuddyPrepared for Acme Mechanical Inc.
Location
Vancouver, WA
Date
Aug 8, 2026
Trade
Electrical
Findings
Penetration seal not matching approved submittal — visible gap at fire-rated assembly
Checked against: Company SOP 4.2
Fastener pattern deviates from manufacturer data sheet — 6" OC required, measured at 9" OC
Checked against: Project Spec 08-31
Working clearance below required minimum at panel — 30" required, 22" measured
Checked against: Applicable Standard
codebuddy.chatPage 1 of 4
Trusted by teams at
Three steps. Five minutes.
Submit your job, and our patent-pending AI technology reviews every photo against your standards, specs, and existing tracking.
Tell us about the job.
Project name, address in Vancouver, and primary trade or discipline. We look up the applicable standards and regulations automatically from the address.
Send your photos and open items.
Upload directly, share a Drive/Dropbox link, or email them over. Your existing tracking sets the bar — anything already on it doesn't count as a finding.
Our patent-pending technology and AI system analyze every photo.
Cross-references each image against your specs, the applicable standards, and your existing tracking — helping identify deviations your list may have missed.
Get your report within 24 hours*.
Each finding includes the photo, the exact location, and the code section or spec it deviates from. Sorted by severity so you know what to fix first.
Built by Code Buddy.
Code Buddy is an AI-powered compliance platform used by thousands of field professionals across construction, energy, manufacturing, and fleet operations. Our patent-pending technology checks job site photos against codes, specs, and standards — the same technology that powers this report.
Built for the people who actually do the work.
Industries supported
Report turnaround
If nothing new identified
The kind of things we help catch.
Examples based on past reports. Each finding includes the photo, location, and the reference it was checked against.
Columbia River flood plain foundation design missing required freeboard elevation above FEMA base flood per Vancouver Municipal Code
Exterior wall vapor retarder installed on wrong side of insulation for Vancouver's Climate Zone 4C moisture flow direction
Commercial rooftop unit refrigerant piping exceeds maximum allowable charge for occupied space per Washington IMC amendment
Vancouver residential service panel located in bathroom violates NEC 240.24(E) overcurrent device location restriction
Water heater seismic strapping uses single strap instead of required upper and lower straps per Washington UPC amendment
Attached garage fire separation assembly uses non-rated door instead of required 20-minute fire-rated door to dwelling unit
And only if we identify something that wasn't already on your list.
If everything identified was already on your list, you pay nothing. You keep the report either way.
GET STARTEDLimited spots each week.
Every report is reviewed by a QA professional before delivery — not just generated and sent. That human review step means we can only take a limited number of jobs per week. Submissions are reviewed in the order they're received, and we'll let you know upfront if your report will take longer than 24 hours.
Before you ask.
How does Vancouver WA's building code differ from Portland Oregon across the river?
Vancouver enforces the Washington State Building Code while Portland uses Oregon's. Key differences include Washington's stricter energy code, different seismic design parameters, Washington-specific UPC plumbing provisions, and distinct permit processes. Contractors working both sides must track these distinctions.
Does Vancouver have flood zone requirements along the Columbia River?
Yes. Vancouver has extensive FEMA-mapped flood zones along the Columbia River and its tributaries. Projects in these areas must meet elevation requirements, use flood-resistant materials below design flood level, and obtain floodplain development permits from the city.
What seismic requirements apply in Vancouver Washington?
Vancouver is in Seismic Design Category D due to the Cascadia subduction zone. All structures require seismic detailing per ASCE 7, and water heaters must have dual seismic straps per Washington UPC amendments not required in neighboring Oregon.
What energy code does Vancouver WA enforce?
Vancouver enforces the Washington State Energy Code for Climate Zone 4C, which is more stringent than Oregon's energy code. Requirements include enhanced insulation values, mandatory air barrier testing, and specific heat pump provisions for residential construction.
How quickly can I get a plan review for a Vancouver WA project?
Vancouver residential reviews typically take two to three weeks and commercial reviews four to six weeks. CodeBuddy delivers a pre-submittal review in 24 hours for $250, identifying Washington-specific code issues before your official Vancouver submittal.