Tacoma, Washington
Find what your
punch list missed.
Send us photos and your tracking list. Get a written findings report within 24 hours* — before your inspector or auditor does.
— any industry with field inspections in Tacoma.
$250, one time · Nothing new, no charge · You keep the report either way
*Depending on availability. We'll confirm turnaround when you submit.
Tacoma enforces the Washington State Building Code with local amendments addressing Cascadia subduction zone seismic hazards, Commencement Bay shoreline protections, and the Tacoma Tideflats industrial corridor. The port city's maritime climate demands rigorous moisture management and corrosion-resistant detailing near saltwater exposure. CodeBuddy reviews your Tacoma plans for $250 with 24-hour turnaround, covering seismic design, energy code, and waterfront compliance.
Code BuddyPrepared for Acme Mechanical Inc.
Location
Tacoma, WA
Date
Aug 8, 2026
Trade
Electrical
Findings
Penetration seal not matching approved submittal — visible gap at fire-rated assembly
Checked against: Company SOP 4.2
Fastener pattern deviates from manufacturer data sheet — 6" OC required, measured at 9" OC
Checked against: Project Spec 08-31
Working clearance below required minimum at panel — 30" required, 22" measured
Checked against: Applicable Standard
codebuddy.chatPage 1 of 4
Trusted by teams at
Three steps. Five minutes.
Submit your job, and our patent-pending AI technology reviews every photo against your standards, specs, and existing tracking.
Tell us about the job.
Project name, address in Tacoma, and primary trade or discipline. We look up the applicable standards and regulations automatically from the address.
Send your photos and open items.
Upload directly, share a Drive/Dropbox link, or email them over. Your existing tracking sets the bar — anything already on it doesn't count as a finding.
Our patent-pending technology and AI system analyze every photo.
Cross-references each image against your specs, the applicable standards, and your existing tracking — helping identify deviations your list may have missed.
Get your report within 24 hours*.
Each finding includes the photo, the exact location, and the code section or spec it deviates from. Sorted by severity so you know what to fix first.
Built by Code Buddy.
Code Buddy is an AI-powered compliance platform used by thousands of field professionals across construction, energy, manufacturing, and fleet operations. Our patent-pending technology checks job site photos against codes, specs, and standards — the same technology that powers this report.
Built for the people who actually do the work.
Industries supported
Report turnaround
If nothing new identified
The kind of things we help catch.
Examples based on past reports. Each finding includes the photo, location, and the reference it was checked against.
Tideflats industrial building pile foundation design omits required liquefaction-induced lateral spreading analysis for port soils
Exterior fasteners near Commencement Bay shoreline not specified as stainless steel per saltwater corrosion resistance requirements
Tacoma project ventilation rate calculation omits required outdoor air for maritime climate mold prevention per IMC Table 403.3
Tacoma Tideflats hazardous occupancy storage exceeds maximum allowable quantities without required H-occupancy classification
Port-area crane power supply disconnecting means not within required sight line per NEC 610.31 for dockside operations
Rainwater leader connection to combined storm system missing required oil-water separator for Tideflats industrial parcel
And only if we identify something that wasn't already on your list.
If everything identified was already on your list, you pay nothing. You keep the report either way.
GET STARTEDLimited spots each week.
Every report is reviewed by a QA professional before delivery — not just generated and sent. That human review step means we can only take a limited number of jobs per week. Submissions are reviewed in the order they're received, and we'll let you know upfront if your report will take longer than 24 hours.
Before you ask.
What building codes does Tacoma enforce?
Tacoma adopts the Washington State Building Code including IBC, IRC, IMC, UPC, NEC, and IFC with city amendments. Tacoma also enforces shoreline management regulations, critical areas protections, and specific Tideflats industrial overlay requirements.
Does Tacoma have special requirements for waterfront construction?
Yes. Projects within Tacoma's shoreline jurisdiction must comply with the Shoreline Management Act, require shoreline permits, and address flood hazard, erosion control, and environmental mitigation. Saltwater exposure zones require corrosion-resistant materials and protective coatings.
What seismic considerations apply in Tacoma?
Tacoma is in Seismic Design Category D due to the Cascadia subduction zone. The Tideflats and port areas have liquefiable fill soils requiring deep foundations. Hilltop and slope areas may trigger landslide hazard analysis and enhanced retaining wall design.
How does Tacoma's maritime climate affect building design?
Tacoma's marine climate brings sustained rainfall, high humidity, and wind-driven rain that demand continuous air barriers, rain screen wall assemblies, proper flashing sequences, and ventilated roof systems to prevent moisture intrusion and mold growth.
How fast can I get Tacoma plans reviewed?
Tacoma's official residential reviews take two to four weeks and commercial reviews run four to eight weeks. CodeBuddy provides a pre-submittal plan review in 24 hours for $250, catching common deficiencies before your formal Tacoma submittal.