Dallas County, Texas
Find what your
punch list missed.
Send us photos and your tracking list. Get a written findings report within 24 hours* — before your inspector or auditor does.
— any industry with field inspections in Dallas County.
$250, one time · Nothing new, no charge · You keep the report either way
*Depending on availability. We'll confirm turnaround when you submit.
Code Buddy's Inspection Readiness Report for Dallas County projects is a flat $250 with findings delivered within 24 hours. Send your site photos and open items list, and our specialists evaluate your work against adopted codes while accounting for the region's rapid commercial growth, freeze-thaw cycles, and the high-wind events common across North Texas.
Code BuddyPrepared for Acme Mechanical Inc.
Location
Dallas County, TX
Date
Aug 8, 2026
Trade
Electrical
Findings
Penetration seal not matching approved submittal — visible gap at fire-rated assembly
Checked against: Company SOP 4.2
Fastener pattern deviates from manufacturer data sheet — 6" OC required, measured at 9" OC
Checked against: Project Spec 08-31
Working clearance below required minimum at panel — 30" required, 22" measured
Checked against: Applicable Standard
codebuddy.chatPage 1 of 4
Trusted by teams at
Three steps. Five minutes.
Submit your job, and our patent-pending AI technology reviews every photo against your standards, specs, and existing tracking.
Tell us about the job.
Project name, address in Dallas County, and primary trade or discipline. We look up the applicable standards and regulations automatically from the address.
Send your photos and open items.
Upload directly, share a Drive/Dropbox link, or email them over. Your existing tracking sets the bar — anything already on it doesn't count as a finding.
Our patent-pending technology and AI system analyze every photo.
Cross-references each image against your specs, the applicable standards, and your existing tracking — helping identify deviations your list may have missed.
Get your report within 24 hours*.
Each finding includes the photo, the exact location, and the code section or spec it deviates from. Sorted by severity so you know what to fix first.
Built by Code Buddy.
Code Buddy is an AI-powered compliance platform used by thousands of field professionals across construction, energy, manufacturing, and fleet operations. Our patent-pending technology checks job site photos against codes, specs, and standards — the same technology that powers this report.
Built for the people who actually do the work.
Industries supported
Report turnaround
If nothing new identified
The kind of things we help catch.
Examples based on past reports. Each finding includes the photo, location, and the reference it was checked against.
Service entrance conduit lacking expansion fitting where it crosses building expansion joint
Masonry veneer tie spacing exceeds 24 inches on center at two-story commercial facade
Rooftop unit curb flashing not sealed against North Texas wind-driven rain at parapet transition
Exterior hose bibb missing freeze-proof stem required for Dallas County's freeze-thaw climate
Fire damper at rated corridor wall not accessible for inspection after ceiling grid installed
Continuous insulation at steel stud wall shows gaps at window header creating thermal bridge
And only if we identify something that wasn't already on your list.
If everything identified was already on your list, you pay nothing. You keep the report either way.
GET STARTEDLimited spots each week.
Every report is reviewed by a QA professional before delivery — not just generated and sent. That human review step means we can only take a limited number of jobs per week. Submissions are reviewed in the order they're received, and we'll let you know upfront if your report will take longer than 24 hours.
Before you ask.
Does Dallas County enforce the same codes as the City of Dallas?
Not always. Unincorporated Dallas County areas may follow county-adopted codes that differ from the city's local amendments. Our $250 report applies the correct code set based on your project location.
How do freeze events in Dallas County affect your review?
We check pipe insulation, freeze-proof fixtures, and backflow protection that became critical after recent Texas winter storms. These items are commonly missed and flagged by inspectors.
Can you review a warehouse or distribution center project?
Yes. Dallas County's logistics corridor means we see many warehouse projects. We check high-pile storage compliance, fire sprinkler coverage, and dock door framing. Results within 24 hours.
What do I need to submit for the $250 report?
Upload site photos of each open item and your current open items or open items log. Include any inspection correction notices. We handle the rest and deliver findings within 24 hours.
Do you review residential projects in Dallas County?
Yes. We review single-family, townhome, and multifamily projects. Dallas County's residential growth means inspectors are stretched thin, making pre-inspection review especially valuable.