Fire Protection · Dallas County, Texas

Fire Protection inspection readiness
for Dallas County.

Send us photos of your fire protection work and your tracking list. Get a written findings report within 24 hours* — before your inspector does.

Sprinklers, fire alarms, egress, fire stopping, extinguishers, and fire code compliance.

Your first report is free · Limited spots each week
*Depending on availability. We'll confirm turnaround when you submit.

Code Buddy's Inspection Readiness Report checks your fire protection work in Dallas County, Texas against the codes and specs that apply. Send photos of sprinklers, fire alarms, egress, fire stopping, extinguishers, and fire code compliance and your tracking list — get a written findings report within 24 hours* scoring every item. Free — limited spots each week — nothing new found, no charge.

Trusted by teams at

Layton ConstructionBell ConstructionIPSPraetorian Power

Common questions

What teams ask about fire protection inspections in Dallas County

These are the questions field teams ask before an inspection. Our report answers all of them for your specific job.

fire inspection preparation in Dallas County?

fire sprinkler inspection checklist in Dallas County?

fire alarm inspection requirements in Dallas County?

fire marshal walkthrough prep in Dallas County?

fire life safety inspection in Dallas County?

Three steps. Five minutes.

Submit your fire protection job, and our patent-pending AI reviews every photo against the standards that apply in Dallas County.

1

Tell us about your fire protection job.

Project name, address in Dallas County, and scope. We look up the applicable standards automatically.

Applicable standards pulled from the project address
Upload your own specs for tighter checking
2

Send photos of your fire protection work.

Upload directly, share a Drive/Dropbox link, or email them. Your existing tracking sets the bar.

Your photos stay private — never shared or sold
3

AI reviews every photo.

Cross-references against codes, specs, and your tracking — flagging fire protection deviations your list missed.

Hundreds of inspections completed
Every finding reviewed by a QA professional
4

Get your report within 24 hours*.

Each finding includes the photo, location, and reference. Sorted by severity.

24-hour turnaround (depending on availability)
Your first report is free — limited spots each week

Fire Protection findings we help catch in Dallas County.

Examples based on past reports — each includes the photo, location, and the reference checked against.

Structural·Will fail inspection

Masonry veneer tie spacing exceeds 24 inches on center at two-story commercial facade

Mechanical·Rework before cover

Rooftop unit curb flashing not sealed against North Texas wind-driven rain at parapet transition

Plumbing·Code violation

Exterior hose bibb missing freeze-proof stem required for Dallas County's freeze-thaw climate

Fire Protection·Will fail inspection

Fire damper at rated corridor wall not accessible for inspection after ceiling grid installed

Your first report is free.

Send us one fire protection job. Get a full findings report. No cost, no commitment.

Every report is reviewed by a QA professional before delivery. That means we can only take a limited number each week.

GET YOUR FREE FIRE PROTECTION REPORT

Limited spots each week.

Every report is reviewed by a QA professional before delivery. Submissions are reviewed in order received.

One fire protection job in Dallas County. Your first report is free.
Limited spots — don't wait.