Cleveland, Ohio
Find what your
punch list missed.
Send us photos and your tracking list. Get a written findings report within 24 hours* — before your inspector or auditor does.
— any industry with field inspections in Cleveland.
$250, one time · Nothing new, no charge · You keep the report either way
*Depending on availability. We'll confirm turnaround when you submit.
The Cleveland Inspection Readiness Report is a one-time $250 review with 24-hour turnaround. Send your jobsite photos and tracking list for a specialist review against Ohio Building Code and Cleveland's local amendments. Lake Erie's lake-effect snow loads, freeze-thaw cycling on masonry, and Cleveland's older housing stock with lead paint concerns make pre-inspection review particularly valuable in this market.
Code BuddyPrepared for Acme Mechanical Inc.
Location
Cleveland, OH
Date
Aug 8, 2026
Trade
Electrical
Findings
Penetration seal not matching approved submittal — visible gap at fire-rated assembly
Checked against: Company SOP 4.2
Fastener pattern deviates from manufacturer data sheet — 6" OC required, measured at 9" OC
Checked against: Project Spec 08-31
Working clearance below required minimum at panel — 30" required, 22" measured
Checked against: Applicable Standard
codebuddy.chatPage 1 of 4
Trusted by teams at
Three steps. Five minutes.
Submit your job, and our patent-pending AI technology reviews every photo against your standards, specs, and existing tracking.
Tell us about the job.
Project name, address in Cleveland, and primary trade or discipline. We look up the applicable standards and regulations automatically from the address.
Send your photos and open items.
Upload directly, share a Drive/Dropbox link, or email them over. Your existing tracking sets the bar — anything already on it doesn't count as a finding.
Our patent-pending technology and AI system analyze every photo.
Cross-references each image against your specs, the applicable standards, and your existing tracking — helping identify deviations your list may have missed.
Get your report within 24 hours*.
Each finding includes the photo, the exact location, and the code section or spec it deviates from. Sorted by severity so you know what to fix first.
Built by Code Buddy.
Code Buddy is an AI-powered compliance platform used by thousands of field professionals across construction, energy, manufacturing, and fleet operations. Our patent-pending technology checks job site photos against codes, specs, and standards — the same technology that powers this report.
Built for the people who actually do the work.
Industries supported
Report turnaround
If nothing new identified
The kind of things we help catch.
Examples based on past reports. Each finding includes the photo, location, and the reference it was checked against.
Roof framing not designed for Cleveland's 30 psf lake-effect ground snow load per Ohio Building Code Table 1608.2
GFCI protection missing on basement receptacles in 1920s Cleveland Heights home with known moisture infiltration history
Water heater expansion tank not installed on closed-loop system as required after meter replacement with check valve
Exterior brick repointing mortar too hard for original soft-fired Cleveland common brick causing accelerated spalling
Ductwork insulation missing on supply runs through unheated garage increasing heat loss in lake-effect cold snaps
Smoke detector placement in converted attic bedroom does not meet spacing requirements for cathedral ceiling geometry
And only if we identify something that wasn't already on your list.
If everything identified was already on your list, you pay nothing. You keep the report either way.
GET STARTEDLimited spots each week.
Every report is reviewed by a QA professional before delivery — not just generated and sent. That human review step means we can only take a limited number of jobs per week. Submissions are reviewed in the order they're received, and we'll let you know upfront if your report will take longer than 24 hours.
Before you ask.
Does Cleveland enforce different snow load requirements than the rest of Ohio?
Yes. Cleveland and the surrounding Lake Erie shore communities have higher ground snow load requirements due to lake-effect precipitation. The report checks your structural framing against these locally elevated load values per Ohio Building Code tables.
What are the most common Cleveland inspection failures?
Electrical grounding issues in older homes, missing GFCI protection, improper masonry repair techniques on century-old brick, and inadequate attic insulation are frequent Cleveland fail items. Lead paint violations also trigger stops on pre-1978 housing renovations.
How does the report handle Cleveland's lead paint requirements?
If your project involves a pre-1978 structure in Cleveland, the report flags work areas where lead-safe practices and EPA RRP rule compliance are required. Cleveland inspectors actively check for proper containment and clearance testing documentation.
Can I use this report for a Cleveland commercial renovation?
Yes. The report covers commercial projects including change-of-occupancy conversions, tenant buildouts, and industrial rehabilitations. Cleveland's industrial legacy means many commercial projects involve older structures with specific code compliance challenges.
Does the report account for freeze-thaw damage on exterior work?
Yes. Cleveland's freeze-thaw cycles are among the most severe in Ohio. The report evaluates exterior masonry, concrete, roofing, and flashing details for vulnerability to moisture infiltration and thermal cycling damage that inspectors will flag.