Akron, Ohio
Find what your
punch list missed.
Send us photos and your tracking list. Get a written findings report within 24 hours* — before your inspector or auditor does.
— any industry with field inspections in Akron.
$250, one time · Nothing new, no charge · You keep the report either way
*Depending on availability. We'll confirm turnaround when you submit.
The Akron Inspection Readiness Report is a one-time $250 review with 24-hour turnaround. You submit jobsite photos and your tracking list, and a specialist checks your work against Ohio Building Code requirements and Akron's local amendments. Akron's aging rubber-industry-era building stock means inspectors pay close attention to outdated wiring, deteriorating masonry, and lead paint abatement in pre-1978 structures.
Code BuddyPrepared for Acme Mechanical Inc.
Location
Akron, OH
Date
Aug 8, 2026
Trade
Electrical
Findings
Penetration seal not matching approved submittal — visible gap at fire-rated assembly
Checked against: Company SOP 4.2
Fastener pattern deviates from manufacturer data sheet — 6" OC required, measured at 9" OC
Checked against: Project Spec 08-31
Working clearance below required minimum at panel — 30" required, 22" measured
Checked against: Applicable Standard
codebuddy.chatPage 1 of 4
Trusted by teams at
Three steps. Five minutes.
Submit your job, and our patent-pending AI technology reviews every photo against your standards, specs, and existing tracking.
Tell us about the job.
Project name, address in Akron, and primary trade or discipline. We look up the applicable standards and regulations automatically from the address.
Send your photos and open items.
Upload directly, share a Drive/Dropbox link, or email them over. Your existing tracking sets the bar — anything already on it doesn't count as a finding.
Our patent-pending technology and AI system analyze every photo.
Cross-references each image against your specs, the applicable standards, and your existing tracking — helping identify deviations your list may have missed.
Get your report within 24 hours*.
Each finding includes the photo, the exact location, and the code section or spec it deviates from. Sorted by severity so you know what to fix first.
Built by Code Buddy.
Code Buddy is an AI-powered compliance platform used by thousands of field professionals across construction, energy, manufacturing, and fleet operations. Our patent-pending technology checks job site photos against codes, specs, and standards — the same technology that powers this report.
Built for the people who actually do the work.
Industries supported
Report turnaround
If nothing new identified
The kind of things we help catch.
Examples based on past reports. Each finding includes the photo, location, and the reference it was checked against.
Panel bonding jumper missing on 200A service upgrade in former rubber mill converted to mixed-use occupancy
Backflow preventer not installed on irrigation tap connected to municipal water in area with known lead service lines
Freeze-thaw spalling on load-bearing masonry wall not addressed in rehabilitation scope of work
Combustion air duct undersized for 80,000 BTU furnace in tightly sealed retrofit of 1940s bungalow
Vapor barrier lapped incorrectly at crawlspace pier footings allowing moisture migration into floor joists
Fire damper missing at supply duct penetration through rated corridor wall in converted industrial loft space
And only if we identify something that wasn't already on your list.
If everything identified was already on your list, you pay nothing. You keep the report either way.
GET STARTEDLimited spots each week.
Every report is reviewed by a QA professional before delivery — not just generated and sent. That human review step means we can only take a limited number of jobs per week. Submissions are reviewed in the order they're received, and we'll let you know upfront if your report will take longer than 24 hours.
Before you ask.
What code cycle does Akron currently enforce?
Akron enforces the Ohio Building Code, which is based on the 2017 ICC codes with state-specific amendments. The Akron Building Department may layer additional local amendments on top, particularly for older structures in the downtown core.
What are the most common inspection failures in Akron?
Electrical grounding deficiencies, missing GFCI protection in older homes, and inadequate combustion air for furnace replacements are frequent fail items. Akron inspectors also flag deteriorated masonry and improper lead paint handling in pre-1978 housing.
How quickly can I schedule an inspection with the Akron Building Department?
Akron typically schedules inspections within two to five business days of request. Wait times increase during spring and summer construction season. Having your Readiness Report completed beforehand reduces the risk of a failed inspection delaying your project.
Does the report cover Akron's local amendments to Ohio code?
Yes. The report evaluates your work against both the base Ohio Building Code and any Akron-specific amendments. This includes requirements related to historic district overlays and the city's legacy industrial building stock.
Can I use the report for a renovation of an older Akron industrial building?
Absolutely. Industrial-to-residential and industrial-to-commercial conversions are common in Akron. The report flags change-of-occupancy issues, structural concerns in aging buildings, and environmental items like lead paint and asbestos that inspectors will look for.