Missoula, Montana
Find what your
punch list missed.
Send us photos and your tracking list. Get a written findings report within 24 hours* — before your inspector or auditor does.
— any industry with field inspections in Missoula.
$250, one time · Nothing new, no charge · You keep the report either way
*Depending on availability. We'll confirm turnaround when you submit.
Missoula, Montana enforces state-adopted IBC and IRC with local amendments emphasizing wildfire-resistant construction in the surrounding forested valleys and snow load design for mountain terrain. CodeBuddy reviews Missoula plans for $250 with 24-hour turnaround, checking ignition-resistant assemblies, steep-slope snow drift loads, frost protection, and extreme cold energy performance.
Code BuddyPrepared for Acme Mechanical Inc.
Location
Missoula, MT
Date
Aug 8, 2026
Trade
Electrical
Findings
Penetration seal not matching approved submittal — visible gap at fire-rated assembly
Checked against: Company SOP 4.2
Fastener pattern deviates from manufacturer data sheet — 6" OC required, measured at 9" OC
Checked against: Project Spec 08-31
Working clearance below required minimum at panel — 30" required, 22" measured
Checked against: Applicable Standard
codebuddy.chatPage 1 of 4
Trusted by teams at
Three steps. Five minutes.
Submit your job, and our patent-pending AI technology reviews every photo against your standards, specs, and existing tracking.
Tell us about the job.
Project name, address in Missoula, and primary trade or discipline. We look up the applicable standards and regulations automatically from the address.
Send your photos and open items.
Upload directly, share a Drive/Dropbox link, or email them over. Your existing tracking sets the bar — anything already on it doesn't count as a finding.
Our patent-pending technology and AI system analyze every photo.
Cross-references each image against your specs, the applicable standards, and your existing tracking — helping identify deviations your list may have missed.
Get your report within 24 hours*.
Each finding includes the photo, the exact location, and the code section or spec it deviates from. Sorted by severity so you know what to fix first.
Built by Code Buddy.
Code Buddy is an AI-powered compliance platform used by thousands of field professionals across construction, energy, manufacturing, and fleet operations. Our patent-pending technology checks job site photos against codes, specs, and standards — the same technology that powers this report.
Built for the people who actually do the work.
Industries supported
Report turnaround
If nothing new identified
The kind of things we help catch.
Examples based on past reports. Each finding includes the photo, location, and the reference it was checked against.
Deck and attached structure in Missoula wildland-urban interface lacks Class A fire-rated roofing and enclosed eaves
Unbalanced snow drift load on lower roof section not calculated for Missoula valley ground snow load of 40 psf
Woodstove installation clearances to combustibles do not meet listing requirements for secondary heat source
Hydronic radiant floor system lacks backflow prevention and expansion tank required by Montana plumbing code
Detached garage sub-panel grounding does not include separate equipment grounding conductor to main panel
Vegetation clearance around propane tank does not meet 10-foot defensible space requirement in Missoula fire zone
And only if we identify something that wasn't already on your list.
If everything identified was already on your list, you pay nothing. You keep the report either way.
GET STARTEDLimited spots each week.
Every report is reviewed by a QA professional before delivery — not just generated and sent. That human review step means we can only take a limited number of jobs per week. Submissions are reviewed in the order they're received, and we'll let you know upfront if your report will take longer than 24 hours.
Before you ask.
What wildfire construction requirements does Missoula enforce?
Missoula requires ignition-resistant exterior materials, enclosed soffits, ember-resistant vents, and defensible space for properties in or near wildland-urban interface zones. CodeBuddy checks all exterior assemblies against these requirements and flags non-compliant details.
What snow load values does CodeBuddy use for Missoula?
CodeBuddy applies the ground snow load assigned to the Missoula area under Montana amendments, which can reach 40 psf or higher depending on elevation. It checks roof framing, drift loads on multi-level roofs, and sliding snow provisions on sloped surfaces.
Are woodstove installations reviewed by CodeBuddy?
Yes. CodeBuddy verifies clearances to combustibles, hearth extension dimensions, chimney height above the roof ridge, and listing compliance for the specific stove model. It also checks combustion air supply to the room where the unit is installed.
How much does a Missoula plan review cost and how fast is it?
CodeBuddy provides a comprehensive code review for $250 with delivery within 24 hours. The report covers structural, mechanical, electrical, plumbing, fire protection, and energy code items with specific code references for each finding.
Does Missoula require special energy code compliance for new homes?
Yes. Missoula is in Climate Zone 6, requiring high-performance insulation, air sealing, and efficient heating systems. CodeBuddy verifies envelope R-values, window performance ratings, and mechanical system efficiency against the adopted energy conservation code.
Also in Montana