Billings, Montana
Find what your
punch list missed.
Send us photos and your tracking list. Get a written findings report within 24 hours* — before your inspector or auditor does.
— any industry with field inspections in Billings.
$250, one time · Nothing new, no charge · You keep the report either way
*Depending on availability. We'll confirm turnaround when you submit.
Billings, Montana enforces state-adopted IBC and IRC codes with local amendments addressing snow load, extreme cold, and high wind exposure across the Yellowstone Valley. CodeBuddy reviews Billings residential and commercial plans for $250 with 24-hour turnaround, flagging wildfire-interface setbacks, frost-depth footings, and energy code compliance for Montana's cold-dry climate.
Code BuddyPrepared for Acme Mechanical Inc.
Location
Billings, MT
Date
Aug 8, 2026
Trade
Electrical
Findings
Penetration seal not matching approved submittal — visible gap at fire-rated assembly
Checked against: Company SOP 4.2
Fastener pattern deviates from manufacturer data sheet — 6" OC required, measured at 9" OC
Checked against: Project Spec 08-31
Working clearance below required minimum at panel — 30" required, 22" measured
Checked against: Applicable Standard
codebuddy.chatPage 1 of 4
Trusted by teams at
Three steps. Five minutes.
Submit your job, and our patent-pending AI technology reviews every photo against your standards, specs, and existing tracking.
Tell us about the job.
Project name, address in Billings, and primary trade or discipline. We look up the applicable standards and regulations automatically from the address.
Send your photos and open items.
Upload directly, share a Drive/Dropbox link, or email them over. Your existing tracking sets the bar — anything already on it doesn't count as a finding.
Our patent-pending technology and AI system analyze every photo.
Cross-references each image against your specs, the applicable standards, and your existing tracking — helping identify deviations your list may have missed.
Get your report within 24 hours*.
Each finding includes the photo, the exact location, and the code section or spec it deviates from. Sorted by severity so you know what to fix first.
Built by Code Buddy.
Code Buddy is an AI-powered compliance platform used by thousands of field professionals across construction, energy, manufacturing, and fleet operations. Our patent-pending technology checks job site photos against codes, specs, and standards — the same technology that powers this report.
Built for the people who actually do the work.
Industries supported
Report turnaround
If nothing new identified
The kind of things we help catch.
Examples based on past reports. Each finding includes the photo, location, and the reference it was checked against.
Roof truss design does not meet Billings 30 psf ground snow load requirement per Montana amendments
Furnace combustion air intake located where drifting snow could block airflow during winter storms
Exterior wall insulation R-value below minimum for Montana Climate Zone 6 energy code
Outdoor disconnect switch lacks weatherproof rating required for Billings freeze-thaw cycling
Water supply lines in exterior wall lack heat trace or insulation for frost protection below the 48-inch frost line
Structure in wildland-urban interface zone missing ignition-resistant exterior cladding and ember-resistant vents
And only if we identify something that wasn't already on your list.
If everything identified was already on your list, you pay nothing. You keep the report either way.
GET STARTEDLimited spots each week.
Every report is reviewed by a QA professional before delivery — not just generated and sent. That human review step means we can only take a limited number of jobs per week. Submissions are reviewed in the order they're received, and we'll let you know upfront if your report will take longer than 24 hours.
Before you ask.
What codes does Billings enforce for new construction?
Billings enforces the state-adopted International Building Code and International Residential Code with Montana-specific amendments. The city also applies the International Energy Conservation Code and local fire zone overlay requirements for properties near wildland-urban interface areas.
How does CodeBuddy handle Billings snow load requirements?
CodeBuddy checks structural plans against the ground snow load values assigned to the Billings area under Montana amendments. It verifies roof framing, truss design, and drift load calculations to ensure compliance before you submit to the Billings Building Department.
What is the frost depth requirement in Billings?
Foundation footings in Billings must extend to at least 48 inches below grade to reach below the frost line. CodeBuddy flags any footing detail that does not meet this depth and checks insulation details for heated slab foundations.
How long does a plan review take and what does it cost?
CodeBuddy delivers a full code compliance review within 24 hours for $250. The report covers structural, mechanical, electrical, plumbing, fire, and energy code items so you can address findings before submitting permits.
Does CodeBuddy check wildfire interface requirements for Billings properties?
Yes. For parcels within or near a designated wildland-urban interface zone, CodeBuddy verifies ignition-resistant construction materials, defensible space setbacks, and ember-resistant vent specifications required under Montana building provisions.
Also in Montana