Great Falls, Montana
Find what your
punch list missed.
Send us photos and your tracking list. Get a written findings report within 24 hours* — before your inspector or auditor does.
— any industry with field inspections in Great Falls.
*Depending on availability. We'll confirm turnaround when you submit.
Great Falls, Montana follows state-adopted building codes with amendments for extreme wind exposure along the Missouri River corridor and heavy snow loads. CodeBuddy reviews Great Falls plans for free with 24-hour turnaround, checking wind bracing, frost-depth footings at 48 inches, ice dam detailing, and energy code compliance for Climate Zone 6 cold-dry conditions.
Code BuddyPrepared for Acme Mechanical Inc.
Location
Great Falls, MT
Date
Aug 8, 2026
Trade
Electrical
Findings
Penetration seal not matching approved submittal — visible gap at fire-rated assembly
Checked against: Company SOP 4.2
Fastener pattern deviates from manufacturer data sheet — 6" OC required, measured at 9" OC
Checked against: Project Spec 08-31
Working clearance below required minimum at panel — 30" required, 22" measured
Checked against: Applicable Standard
codebuddy.chatPage 1 of 4
Trusted by teams at
Three steps. Five minutes.
Submit your job, and our patent-pending AI technology reviews every photo against your standards, specs, and existing tracking.
Tell us about the job.
Project name, address in Great Falls, and primary trade or discipline. We look up the applicable standards and regulations automatically from the address.
Send your photos and open items.
Upload directly, share a Drive/Dropbox link, or email them over. Your existing tracking sets the bar — anything already on it doesn't count as a finding.
Our patent-pending technology and AI system analyze every photo.
Cross-references each image against your specs, the applicable standards, and your existing tracking — helping identify deviations your list may have missed.
Get your report within 24 hours*.
Each finding includes the photo, the exact location, and the code section or spec it deviates from. Sorted by severity so you know what to fix first.
Built by Code Buddy.
Code Buddy is an AI-powered compliance platform used by thousands of field professionals across construction, energy, manufacturing, and fleet operations. Our patent-pending technology checks job site photos against codes, specs, and standards — the same technology that powers this report.
Built for the people who actually do the work.
Industries supported
Report turnaround
Limited availability
The kind of things we help catch.
Examples based on past reports. Each finding includes the photo, location, and the reference it was checked against.
Wall bracing schedule does not account for Great Falls 115 mph ultimate design wind speed along the Missouri River corridor
Ice and water shield membrane missing at eave edges where ice dam formation is common in Great Falls winters
Rooftop HVAC unit anchorage insufficient for sustained high-wind conditions typical of the Great Falls area
Exterior hose bibb lacks freeze-proof design required for installations exposed to sub-zero temperatures
Service mast height and guy-wire spacing do not meet wind loading requirements for this exposure category
Fire department access road grade exceeds maximum allowable slope for apparatus response on hilly terrain
Send us one job. Get a full findings report. No cost, no commitment.
Every report is reviewed by a QA professional before delivery — not just generated and sent. That means we can only take a limited number each week.
GET YOUR FREE REPORTBefore you ask.
What wind speed design values apply in Great Falls?
Great Falls falls within a high-wind zone along the Missouri River corridor. Structures must be designed for ultimate wind speeds that can exceed 110 mph. CodeBuddy verifies wall bracing, roof tie-downs, and cladding fastener schedules against these values.
Does CodeBuddy check for ice dam prevention details in Great Falls?
Yes. Great Falls experiences frequent freeze-thaw cycles that create ice dams. CodeBuddy verifies ice and water shield membrane at eaves, proper attic ventilation ratios, and insulation continuity to reduce ice dam risk on sloped roofs.
What is the foundation frost depth in Great Falls, Montana?
Footings must extend at least 48 inches below finished grade to sit below the frost line. CodeBuddy flags any foundation plan that falls short and checks insulation details for frost-protected shallow foundations if that alternative is proposed.
How much does a Great Falls plan review cost?
A full code compliance review covering structural, mechanical, electrical, plumbing, fire, and energy code items is free with results delivered within 24 hours. The report identifies specific code sections so corrections are straightforward.
What energy code requirements apply in Great Falls?
Great Falls is in Climate Zone 6, requiring high insulation values, tight air sealing, and efficient heating systems under the International Energy Conservation Code. CodeBuddy checks wall, ceiling, and floor R-values along with window U-factor ratings.