Tuscaloosa, Alabama
Find what your
punch list missed.
Send us photos and your tracking list. Get a written findings report within 24 hours* — before your inspector or auditor does.
— any industry with field inspections in Tuscaloosa.
$250, one time · Nothing new, no charge · You keep the report either way
*Depending on availability. We'll confirm turnaround when you submit.
Tuscaloosa contractors can get a written Inspection Readiness Report for $250 with results delivered within 24 hours. Submit your photos and tracking list before your inspection, and receive documented findings addressing the construction standards enforced in Tuscaloosa, where tornado-resilient building practices and University of Alabama campus-area development drive heightened attention to structural and wind-resistance requirements.
Code BuddyPrepared for Acme Mechanical Inc.
Location
Tuscaloosa, AL
Date
Aug 8, 2026
Trade
Electrical
Findings
Penetration seal not matching approved submittal — visible gap at fire-rated assembly
Checked against: Company SOP 4.2
Fastener pattern deviates from manufacturer data sheet — 6" OC required, measured at 9" OC
Checked against: Project Spec 08-31
Working clearance below required minimum at panel — 30" required, 22" measured
Checked against: Applicable Standard
codebuddy.chatPage 1 of 4
Trusted by teams at
Three steps. Five minutes.
Submit your job, and our patent-pending AI technology reviews every photo against your standards, specs, and existing tracking.
Tell us about the job.
Project name, address in Tuscaloosa, and primary trade or discipline. We look up the applicable standards and regulations automatically from the address.
Send your photos and open items.
Upload directly, share a Drive/Dropbox link, or email them over. Your existing tracking sets the bar — anything already on it doesn't count as a finding.
Our patent-pending technology and AI system analyze every photo.
Cross-references each image against your specs, the applicable standards, and your existing tracking — helping identify deviations your list may have missed.
Get your report within 24 hours*.
Each finding includes the photo, the exact location, and the code section or spec it deviates from. Sorted by severity so you know what to fix first.
Built by Code Buddy.
Code Buddy is an AI-powered compliance platform used by thousands of field professionals across construction, energy, manufacturing, and fleet operations. Our patent-pending technology checks job site photos against codes, specs, and standards — the same technology that powers this report.
Built for the people who actually do the work.
Industries supported
Report turnaround
If nothing new identified
The kind of things we help catch.
Examples based on past reports. Each finding includes the photo, location, and the reference it was checked against.
Continuous load path connection missing from foundation to roof framing per Tuscaloosa's post-tornado enhanced wind resistance standards
Surge protection device not installed at main service panel per NEC 230.67 requirement for dwelling units
Rooftop HVAC unit on Tuscaloosa student housing not anchored to resist 115 mph wind uplift per IMC 301.15
Tankless water heater gas connector exceeds 6-foot maximum flexible connector length per IFGC 411.1.3
Impact-rated underlayment not installed in Tuscaloosa high-wind zone per IRC R905.1 enhanced requirements
Fire sprinkler head coverage obstructed by ceiling fan installation less than 3 feet from deflector per NFPA 13R
And only if we identify something that wasn't already on your list.
If everything identified was already on your list, you pay nothing. You keep the report either way.
GET STARTEDLimited spots each week.
Every report is reviewed by a QA professional before delivery — not just generated and sent. That human review step means we can only take a limited number of jobs per week. Submissions are reviewed in the order they're received, and we'll let you know upfront if your report will take longer than 24 hours.
Before you ask.
What does a Tuscaloosa Inspection Readiness Report include?
The report reviews your submitted photos and tracking list against Tuscaloosa's adopted building codes, including any local amendments driven by tornado-resilience requirements. Findings are organized by trade with severity ratings, code references, and corrective guidance.
Does the report check for Tuscaloosa's wind-resistance requirements?
Yes. After the 2011 tornado, Tuscaloosa adopted enhanced wind-resistance standards. The report specifically checks continuous load path connections, roof sheathing attachment, equipment anchoring, and other wind-related items that Tuscaloosa inspectors prioritize during field reviews.
How does the $250 report work for University of Alabama area projects?
Student housing and commercial projects near campus face tight construction schedules. The 24-hour turnaround means you can submit photos today and have findings tomorrow, giving you time to address issues before your Tuscaloosa inspection without delaying the project.
What trades does the report cover?
The report covers electrical, mechanical, plumbing, structural, insulation, roofing, and fire protection. For Tuscaloosa projects, structural and roofing findings are particularly common due to the city's wind-resistance enforcement emphasis and hot-humid climate requirements.
Can I use this for both residential and commercial Tuscaloosa projects?
Yes. The report adapts to your project type. Tuscaloosa's construction mix includes single-family homes, multi-family student housing, commercial retail, and institutional buildings. Each review is scoped to the applicable code sections for your specific permit and project.
Also in Alabama