Montgomery, Alabama
Find what your
punch list missed.
Send us photos and your tracking list. Get a written findings report within 24 hours* — before your inspector or auditor does.
— any industry with field inspections in Montgomery.
$250, one time · Nothing new, no charge · You keep the report either way
*Depending on availability. We'll confirm turnaround when you submit.
Montgomery contractors can get a written Inspection Readiness Report for $250 with results delivered within 24 hours. Submit your photos and tracking list ahead of your scheduled inspection, and receive documented findings relevant to Montgomery's mix of historic district renovations, Maxwell Air Force Base adjacent construction, and new residential development across the capital city's expanding footprint.
Code BuddyPrepared for Acme Mechanical Inc.
Location
Montgomery, AL
Date
Aug 8, 2026
Trade
Electrical
Findings
Penetration seal not matching approved submittal — visible gap at fire-rated assembly
Checked against: Company SOP 4.2
Fastener pattern deviates from manufacturer data sheet — 6" OC required, measured at 9" OC
Checked against: Project Spec 08-31
Working clearance below required minimum at panel — 30" required, 22" measured
Checked against: Applicable Standard
codebuddy.chatPage 1 of 4
Trusted by teams at
Three steps. Five minutes.
Submit your job, and our patent-pending AI technology reviews every photo against your standards, specs, and existing tracking.
Tell us about the job.
Project name, address in Montgomery, and primary trade or discipline. We look up the applicable standards and regulations automatically from the address.
Send your photos and open items.
Upload directly, share a Drive/Dropbox link, or email them over. Your existing tracking sets the bar — anything already on it doesn't count as a finding.
Our patent-pending technology and AI system analyze every photo.
Cross-references each image against your specs, the applicable standards, and your existing tracking — helping identify deviations your list may have missed.
Get your report within 24 hours*.
Each finding includes the photo, the exact location, and the code section or spec it deviates from. Sorted by severity so you know what to fix first.
Built by Code Buddy.
Code Buddy is an AI-powered compliance platform used by thousands of field professionals across construction, energy, manufacturing, and fleet operations. Our patent-pending technology checks job site photos against codes, specs, and standards — the same technology that powers this report.
Built for the people who actually do the work.
Industries supported
Report turnaround
If nothing new identified
The kind of things we help catch.
Examples based on past reports. Each finding includes the photo, location, and the reference it was checked against.
Knob-and-tube wiring in Montgomery historic district renovation not properly isolated from blown-in insulation per NEC 394.12
Mini-split refrigerant line penetration through exterior wall not sealed with fire-rated caulk per IMC requirements
Cast iron drain stack in Montgomery historic home shows active corrosion at hub joint requiring replacement before concealment
Load-bearing wall header undersized for new window opening width per IRC Table R602.7(1) span tables
Attic insulation coverage below R-38 minimum at eave baffles where soffit vents restrict depth in climate zone 3A
Carbon monoxide detector missing within 10 feet of sleeping area in Montgomery dwelling with attached garage per IRC R315
And only if we identify something that wasn't already on your list.
If everything identified was already on your list, you pay nothing. You keep the report either way.
GET STARTEDLimited spots each week.
Every report is reviewed by a QA professional before delivery — not just generated and sent. That human review step means we can only take a limited number of jobs per week. Submissions are reviewed in the order they're received, and we'll let you know upfront if your report will take longer than 24 hours.
Before you ask.
What does a Montgomery Inspection Readiness Report include?
The report reviews your submitted photos and tracking list against Montgomery's adopted building codes. Each finding is documented with severity, code reference, and recommended action. The review covers all trades relevant to your project type and Montgomery's local requirements.
Does the report handle Montgomery historic district renovation projects?
Yes. Montgomery has significant historic building stock, and renovations in districts like Old Cloverdale and downtown involve code challenges around existing wiring, structural modifications, and material compatibility. The report identifies issues specific to adaptive reuse and historic rehab work.
How does the $250 report fit Montgomery's inspection process?
Montgomery Building Department inspectors check for code compliance across all trades. The report gives you a written preview of likely findings so you can fix issues before the inspector visits, reducing the risk of a failed inspection and rescheduling delays.
What common issues does the report catch in Montgomery?
Frequent findings include undersized headers in wall modifications, missing CO detectors near garages, historic wiring conflicts with new insulation, and HVAC penetration sealing. Montgomery's hot-humid climate also drives vapor management and condensate drainage findings.
Can I use this for military housing projects near Maxwell AFB?
The report covers residential and commercial projects throughout Montgomery, including areas near Maxwell Air Force Base. Construction near the base often involves rapid timelines, and the 24-hour turnaround helps contractors stay on schedule with inspection milestones.
Also in Alabama