Cheyenne, Wyoming
Find what your
punch list missed.
Send us photos and your tracking list. Get a written findings report within 24 hours* — before your inspector or auditor does.
— any industry with field inspections in Cheyenne.
$250, one time · Nothing new, no charge · You keep the report either way
*Depending on availability. We'll confirm turnaround when you submit.
Cheyenne, Wyoming enforces IBC and IRC with Wyoming amendments for extreme wind on the high plains, heavy snow loads, and severe cold. As the state capital, Cheyenne also sees energy sector and military-adjacent construction. CodeBuddy reviews Cheyenne plans for $250 with 24-hour turnaround, verifying wind bracing, frost protection, snow drift loads, and energy code compliance.
Code BuddyPrepared for Acme Mechanical Inc.
Location
Cheyenne, WY
Date
Aug 8, 2026
Trade
Electrical
Findings
Penetration seal not matching approved submittal — visible gap at fire-rated assembly
Checked against: Company SOP 4.2
Fastener pattern deviates from manufacturer data sheet — 6" OC required, measured at 9" OC
Checked against: Project Spec 08-31
Working clearance below required minimum at panel — 30" required, 22" measured
Checked against: Applicable Standard
codebuddy.chatPage 1 of 4
Trusted by teams at
Three steps. Five minutes.
Submit your job, and our patent-pending AI technology reviews every photo against your standards, specs, and existing tracking.
Tell us about the job.
Project name, address in Cheyenne, and primary trade or discipline. We look up the applicable standards and regulations automatically from the address.
Send your photos and open items.
Upload directly, share a Drive/Dropbox link, or email them over. Your existing tracking sets the bar — anything already on it doesn't count as a finding.
Our patent-pending technology and AI system analyze every photo.
Cross-references each image against your specs, the applicable standards, and your existing tracking — helping identify deviations your list may have missed.
Get your report within 24 hours*.
Each finding includes the photo, the exact location, and the code section or spec it deviates from. Sorted by severity so you know what to fix first.
Built by Code Buddy.
Code Buddy is an AI-powered compliance platform used by thousands of field professionals across construction, energy, manufacturing, and fleet operations. Our patent-pending technology checks job site photos against codes, specs, and standards — the same technology that powers this report.
Built for the people who actually do the work.
Industries supported
Report turnaround
If nothing new identified
The kind of things we help catch.
Examples based on past reports. Each finding includes the photo, location, and the reference it was checked against.
Continuous load path from roof to foundation incomplete, missing hold-down anchors required for Cheyenne high-wind zone
Exterior cladding fastener schedule does not meet component and cladding wind pressure for Exposure Category D
Heating system capacity undersized for Cheyenne design temperature of negative 6 degrees Fahrenheit
Sewer line cleanout at property line buried deeper than 42 inches without extension to accessible depth
Backup generator transfer switch not rated for outdoor installation in extreme cold and wind-driven precipitation
Commercial tenant separation wall penetrations not firestopped with listed assembly for required one-hour rating
And only if we identify something that wasn't already on your list.
If everything identified was already on your list, you pay nothing. You keep the report either way.
GET STARTEDLimited spots each week.
Every report is reviewed by a QA professional before delivery — not just generated and sent. That human review step means we can only take a limited number of jobs per week. Submissions are reviewed in the order they're received, and we'll let you know upfront if your report will take longer than 24 hours.
Before you ask.
Why is wind load design so important in Cheyenne?
Cheyenne sits at 6,000 feet on the high plains with minimal terrain shielding, producing some of the highest sustained winds in the state. CodeBuddy checks the full continuous load path, cladding pressures, and garage door wind ratings against adopted wind speed maps.
What heating design temperature does Cheyenne use?
Cheyenne's heating design temperature is approximately negative 6 degrees Fahrenheit. CodeBuddy verifies that HVAC equipment sizing, duct insulation, and pipe freeze protection are adequate for this extreme cold condition under the mechanical code.
Does CodeBuddy check energy code compliance for Cheyenne projects?
Yes. Cheyenne is in Climate Zone 6, requiring high insulation values, continuous air barriers, and efficient heating equipment. CodeBuddy checks envelope R-values, window U-factors, air leakage details, and mechanical efficiency against the adopted energy code.
What does a Cheyenne plan review from CodeBuddy include?
For $250 with 24-hour turnaround, the review covers structural, mechanical, electrical, plumbing, fire protection, and energy code compliance. Each finding cites the applicable code section so you can make corrections before submitting to the Cheyenne Building Department.
Are there special requirements for construction near F.E. Warren Air Force Base?
Properties near the base may face height restrictions, noise attenuation requirements, and airspace obstruction rules. CodeBuddy flags items that fall under local overlay zones and recommends consulting Cheyenne planning staff for project-specific military compatibility review.