Casper, Wyoming
Find what your
punch list missed.
Send us photos and your tracking list. Get a written findings report within 24 hours* — before your inspector or auditor does.
— any industry with field inspections in Casper.
$250, one time · Nothing new, no charge · You keep the report either way
*Depending on availability. We'll confirm turnaround when you submit.
Casper, Wyoming enforces state-adopted IBC and IRC with local provisions addressing high plains wind loads, extreme cold, and oil and gas sector construction. CodeBuddy reviews Casper residential and commercial plans for $250 with 24-hour turnaround, checking wind bracing for sustained gusts, frost-depth footings, snow load design, and energy code compliance for Wyoming's harsh winters.
Code BuddyPrepared for Acme Mechanical Inc.
Location
Casper, WY
Date
Aug 8, 2026
Trade
Electrical
Findings
Penetration seal not matching approved submittal — visible gap at fire-rated assembly
Checked against: Company SOP 4.2
Fastener pattern deviates from manufacturer data sheet — 6" OC required, measured at 9" OC
Checked against: Project Spec 08-31
Working clearance below required minimum at panel — 30" required, 22" measured
Checked against: Applicable Standard
codebuddy.chatPage 1 of 4
Trusted by teams at
Three steps. Five minutes.
Submit your job, and our patent-pending AI technology reviews every photo against your standards, specs, and existing tracking.
Tell us about the job.
Project name, address in Casper, and primary trade or discipline. We look up the applicable standards and regulations automatically from the address.
Send your photos and open items.
Upload directly, share a Drive/Dropbox link, or email them over. Your existing tracking sets the bar — anything already on it doesn't count as a finding.
Our patent-pending technology and AI system analyze every photo.
Cross-references each image against your specs, the applicable standards, and your existing tracking — helping identify deviations your list may have missed.
Get your report within 24 hours*.
Each finding includes the photo, the exact location, and the code section or spec it deviates from. Sorted by severity so you know what to fix first.
Built by Code Buddy.
Code Buddy is an AI-powered compliance platform used by thousands of field professionals across construction, energy, manufacturing, and fleet operations. Our patent-pending technology checks job site photos against codes, specs, and standards — the same technology that powers this report.
Built for the people who actually do the work.
Industries supported
Report turnaround
If nothing new identified
The kind of things we help catch.
Examples based on past reports. Each finding includes the photo, location, and the reference it was checked against.
Roof-to-wall connections lack hurricane clips required for Casper high-wind exposure on the open high plains
Gas piping for oilfield worker housing does not include excess flow valve at meter per Wyoming fuel gas code
Window glazing wind pressure rating insufficient for Casper design wind speed in Exposure Category C terrain
Water heater seismic strapping missing in area where Casper requires bracing for induced seismicity near injection wells
Exterior receptacle on oil service building lacks extra-duty weatherproof cover for wet and dusty conditions
Separation distance between new structure and existing above-ground fuel storage tank below code minimum
And only if we identify something that wasn't already on your list.
If everything identified was already on your list, you pay nothing. You keep the report either way.
GET STARTEDLimited spots each week.
Every report is reviewed by a QA professional before delivery — not just generated and sent. That human review step means we can only take a limited number of jobs per week. Submissions are reviewed in the order they're received, and we'll let you know upfront if your report will take longer than 24 hours.
Before you ask.
What wind load requirements apply to construction in Casper?
Casper sits on open high plains with Exposure Category C conditions, producing high design wind speeds. CodeBuddy verifies roof tie-downs, wall bracing schedules, window glazing ratings, and cladding fastener patterns against the wind loads specified in the adopted building code.
Does CodeBuddy address energy sector building requirements near Casper?
Yes. For structures supporting oil and gas operations, CodeBuddy checks fuel gas piping, hazardous material separation distances, ventilation for enclosed equipment areas, and fire protection requirements that apply to buildings near active well sites.
What is the frost depth for foundations in Casper, Wyoming?
Casper requires foundation footings to extend at least 42 inches below grade to reach below the frost line. CodeBuddy flags any footing that does not meet this depth and reviews frost-protected shallow foundation details when proposed as an alternative.
How much does a plan review cost and when will I get results?
CodeBuddy reviews plans for $250 and delivers a detailed compliance report within 24 hours. The report covers structural, mechanical, electrical, plumbing, fire, and energy code items with code section references for every finding.
What snow load values does Casper require for roof design?
Casper ground snow loads are set by Wyoming code based on location and elevation. CodeBuddy checks roof framing member sizes, truss design loads, and drift load calculations against the assigned values to ensure structural adequacy before permit submission.