Knoxville, Tennessee
Find what your
punch list missed.
Send us photos and your tracking list. Get a written findings report within 24 hours* — before your inspector or auditor does.
— any industry with field inspections in Knoxville.
$250, one time · Nothing new, no charge · You keep the report either way
*Depending on availability. We'll confirm turnaround when you submit.
Knoxville's Appalachian foothills terrain, TVA electrical infrastructure, and elevated radon levels create a distinct set of inspection priorities not found in other Tennessee markets. Code Buddy's Inspection Readiness Report costs $250 one-time and delivers written findings within 24 hours. The report flags radon mitigation, hillside foundation, and energy code issues common in Knoxville-area construction before your inspector arrives.
Code BuddyPrepared for Acme Mechanical Inc.
Location
Knoxville, TN
Date
Aug 8, 2026
Trade
Electrical
Findings
Penetration seal not matching approved submittal — visible gap at fire-rated assembly
Checked against: Company SOP 4.2
Fastener pattern deviates from manufacturer data sheet — 6" OC required, measured at 9" OC
Checked against: Project Spec 08-31
Working clearance below required minimum at panel — 30" required, 22" measured
Checked against: Applicable Standard
codebuddy.chatPage 1 of 4
Trusted by teams at
Three steps. Five minutes.
Submit your job, and our patent-pending AI technology reviews every photo against your standards, specs, and existing tracking.
Tell us about the job.
Project name, address in Knoxville, and primary trade or discipline. We look up the applicable standards and regulations automatically from the address.
Send your photos and open items.
Upload directly, share a Drive/Dropbox link, or email them over. Your existing tracking sets the bar — anything already on it doesn't count as a finding.
Our patent-pending technology and AI system analyze every photo.
Cross-references each image against your specs, the applicable standards, and your existing tracking — helping identify deviations your list may have missed.
Get your report within 24 hours*.
Each finding includes the photo, the exact location, and the code section or spec it deviates from. Sorted by severity so you know what to fix first.
Built by Code Buddy.
Code Buddy is an AI-powered compliance platform used by thousands of field professionals across construction, energy, manufacturing, and fleet operations. Our patent-pending technology checks job site photos against codes, specs, and standards — the same technology that powers this report.
Built for the people who actually do the work.
Industries supported
Report turnaround
If nothing new identified
The kind of things we help catch.
Examples based on past reports. Each finding includes the photo, location, and the reference it was checked against.
Radon-resistant new construction features missing sub-slab gas-permeable layer and sealed penetrations required in Knoxville's Zone 1 radon area
Stepped foundation footing on Knoxville hillside lot missing required vertical reinforcement at each step transition
Panel clearance obstructed by water heater installation, less than thirty-six inches required working space in front of panel
Gas fireplace vent terminal clearance to soffit less than minimum distance specified by manufacturer installation instructions
Radon vent pipe from sub-slab collection point not routed to exterior above roofline as required for passive mitigation system
Window egress well on below-grade bedroom in Knoxville UT-area rental conversion does not meet minimum area requirements
And only if we identify something that wasn't already on your list.
If everything identified was already on your list, you pay nothing. You keep the report either way.
GET STARTEDLimited spots each week.
Every report is reviewed by a QA professional before delivery — not just generated and sent. That human review step means we can only take a limited number of jobs per week. Submissions are reviewed in the order they're received, and we'll let you know upfront if your report will take longer than 24 hours.
Before you ask.
What does the Knoxville Inspection Readiness Report cover?
The report reviews your photos and tracking list against Tennessee building codes as adopted by Knoxville. It covers structural, electrical, plumbing, mechanical, radon mitigation, and energy code items with attention to Knoxville's Appalachian foothills terrain and EPA Zone 1 radon designation.
How much does the Knoxville report cost?
A single report costs $250 one-time with no subscription required. Submit your photos and tracking list and receive written findings within 24 hours covering code compliance issues specific to Knoxville's building jurisdiction.
Does the report check radon mitigation requirements?
Yes. Knoxville is in EPA Radon Zone 1, the highest risk category. The report verifies visible radon-resistant new construction features including sub-slab barriers, sealed penetrations, and vent pipe routing that Knoxville inspectors require on new residential projects.
Can it handle hillside construction near the Smokies?
The report checks foundation systems, stepped footings, retaining walls, and drainage on sloped lots common in Knoxville's foothill terrain. These items are frequent failure points that cause costly re-inspections on hillside residential and commercial projects.
Is this useful for UT campus area rental conversions?
The report covers residential projects in Knoxville including rental conversions near the University of Tennessee campus. Common issues include bedroom egress window sizing, smoke detector placement, and electrical capacity upgrades that Knoxville inspectors flag on conversion projects.
Also in Tennessee