Davidson County, Tennessee
Find what your
punch list missed.
Send us photos and your tracking list. Get a written findings report within 24 hours* — before your inspector or auditor does.
— any industry with field inspections in Davidson County.
$250, one time · Nothing new, no charge · You keep the report either way
*Depending on availability. We'll confirm turnaround when you submit.
Davidson County's suburban growth ring around Nashville sees heavy residential subdivision development and commercial corridor construction, with county inspectors covering a wide geographic area. Code Buddy's Inspection Readiness Report costs $250 one-time and delivers written findings within 24 hours. The report identifies grading, stormwater, and residential framing issues common in Davidson County's expanding unincorporated areas before your inspector arrives.
Code BuddyPrepared for Acme Mechanical Inc.
Location
Davidson County, TN
Date
Aug 8, 2026
Trade
Electrical
Findings
Penetration seal not matching approved submittal — visible gap at fire-rated assembly
Checked against: Company SOP 4.2
Fastener pattern deviates from manufacturer data sheet — 6" OC required, measured at 9" OC
Checked against: Project Spec 08-31
Working clearance below required minimum at panel — 30" required, 22" measured
Checked against: Applicable Standard
codebuddy.chatPage 1 of 4
Trusted by teams at
Three steps. Five minutes.
Submit your job, and our patent-pending AI technology reviews every photo against your standards, specs, and existing tracking.
Tell us about the job.
Project name, address in Davidson County, and primary trade or discipline. We look up the applicable standards and regulations automatically from the address.
Send your photos and open items.
Upload directly, share a Drive/Dropbox link, or email them over. Your existing tracking sets the bar — anything already on it doesn't count as a finding.
Our patent-pending technology and AI system analyze every photo.
Cross-references each image against your specs, the applicable standards, and your existing tracking — helping identify deviations your list may have missed.
Get your report within 24 hours*.
Each finding includes the photo, the exact location, and the code section or spec it deviates from. Sorted by severity so you know what to fix first.
Built by Code Buddy.
Code Buddy is an AI-powered compliance platform used by thousands of field professionals across construction, energy, manufacturing, and fleet operations. Our patent-pending technology checks job site photos against codes, specs, and standards — the same technology that powers this report.
Built for the people who actually do the work.
Industries supported
Report turnaround
If nothing new identified
The kind of things we help catch.
Examples based on past reports. Each finding includes the photo, location, and the reference it was checked against.
Floor joist notching exceeds one-third of joist depth at plumbing penetration in Davidson County new residential construction
Lot grading does not maintain required six-inch fall within first ten feet from Davidson County subdivision home foundation
Smoke detector placement in vaulted ceiling room exceeds maximum distance from peak per current code requirements
Sewer lateral slope less than minimum one-quarter inch per foot measured at cleanout in Davidson County residential project
Furnace return air duct draws from garage space without required separation from dwelling area
Davidson County suburban lot retaining wall lacks required guardrail at top where grade change exceeds thirty inches
And only if we identify something that wasn't already on your list.
If everything identified was already on your list, you pay nothing. You keep the report either way.
GET STARTEDLimited spots each week.
Every report is reviewed by a QA professional before delivery — not just generated and sent. That human review step means we can only take a limited number of jobs per week. Submissions are reviewed in the order they're received, and we'll let you know upfront if your report will take longer than 24 hours.
Before you ask.
What does the Davidson County Inspection Readiness Report cover?
The report reviews your photos and tracking list against Tennessee building codes as adopted by Davidson County. It covers structural, electrical, plumbing, mechanical, and site grading items with attention to suburban development patterns and stormwater requirements in Davidson County's unincorporated areas.
How much does the Davidson County report cost?
The report costs $250 one-time per project with no subscription. Submit your photos and tracking list and receive written findings within 24 hours identifying code issues before your official Davidson County building inspection.
Is Davidson County different from Nashville for inspections?
Davidson County and Nashville operate under a metro government but inspection requirements can differ for unincorporated areas versus city limits. The report applies the correct code overlay for your project location within Davidson County to ensure accurate findings.
Does the report check subdivision grading requirements?
Yes. Davidson County's suburban growth creates many grading and drainage issues on new lots. The report checks foundation-to-grade relationships, lot drainage slopes, retaining wall requirements, and stormwater detention that county inspectors routinely flag.
Can I use this for commercial projects in Davidson County?
The report covers both residential and commercial projects within Davidson County's jurisdiction. Commercial corridor construction along major Davidson County roads involves occupancy separation, accessibility, and parking requirements that the report reviews from your submitted photos.
Also in Tennessee