Warwick, Rhode Island
Find what your
punch list missed.
Send us photos and your tracking list. Get a written findings report within 24 hours* — before your inspector or auditor does.
— any industry with field inspections in Warwick.
$250, one time · Nothing new, no charge · You keep the report either way
*Depending on availability. We'll confirm turnaround when you submit.
Warwick follows the Rhode Island SBC-1 with particular attention to coastal construction along Narragansett Bay. Code Buddy's Inspection Readiness Report for Warwick costs $250 and is delivered within 24 hours. The city's bayfront exposure, airport noise overlay zones near T.F. Green, and mix of suburban commercial and waterfront residential create distinct inspection patterns around wind resistance, sound attenuation, and salt-air durability.
Code BuddyPrepared for Acme Mechanical Inc.
Location
Warwick, RI
Date
Aug 8, 2026
Trade
Electrical
Findings
Penetration seal not matching approved submittal — visible gap at fire-rated assembly
Checked against: Company SOP 4.2
Fastener pattern deviates from manufacturer data sheet — 6" OC required, measured at 9" OC
Checked against: Project Spec 08-31
Working clearance below required minimum at panel — 30" required, 22" measured
Checked against: Applicable Standard
codebuddy.chatPage 1 of 4
Trusted by teams at
Three steps. Five minutes.
Submit your job, and our patent-pending AI technology reviews every photo against your standards, specs, and existing tracking.
Tell us about the job.
Project name, address in Warwick, and primary trade or discipline. We look up the applicable standards and regulations automatically from the address.
Send your photos and open items.
Upload directly, share a Drive/Dropbox link, or email them over. Your existing tracking sets the bar — anything already on it doesn't count as a finding.
Our patent-pending technology and AI system analyze every photo.
Cross-references each image against your specs, the applicable standards, and your existing tracking — helping identify deviations your list may have missed.
Get your report within 24 hours*.
Each finding includes the photo, the exact location, and the code section or spec it deviates from. Sorted by severity so you know what to fix first.
Built by Code Buddy.
Code Buddy is an AI-powered compliance platform used by thousands of field professionals across construction, energy, manufacturing, and fleet operations. Our patent-pending technology checks job site photos against codes, specs, and standards — the same technology that powers this report.
Built for the people who actually do the work.
Industries supported
Report turnaround
If nothing new identified
The kind of things we help catch.
Examples based on past reports. Each finding includes the photo, location, and the reference it was checked against.
Narragansett Bay waterfront deck framing uses untreated lumber instead of required marine-grade pressure-treated members for salt exposure
Hip roof near T.F. Green Airport missing enhanced uplift strapping required for high-wind exposure category per ASCE 7
Outdoor panel and meter base on bay-facing elevation lacks NEMA 3R-rated enclosure suitable for salt spray environment
Coastal condenser unit installed without corrosion-resistant coil coating despite location within 3,000 feet of tidal water
Addition on FEMA AE flood zone lot has water heater mounted at grade instead of elevated above base flood elevation
Airport noise overlay zone renovation missing required STC-rated exterior wall assembly for sound attenuation compliance
And only if we identify something that wasn't already on your list.
If everything identified was already on your list, you pay nothing. You keep the report either way.
GET STARTEDLimited spots each week.
Every report is reviewed by a QA professional before delivery — not just generated and sent. That human review step means we can only take a limited number of jobs per week. Submissions are reviewed in the order they're received, and we'll let you know upfront if your report will take longer than 24 hours.
Before you ask.
What codes govern construction in Warwick?
Warwick enforces the Rhode Island State Building Code (SBC-1) adopting the IBC, IRC, and associated mechanical, plumbing, and energy codes. Coastal properties also face FEMA flood zone and state coastal resources requirements.
How much does a Warwick Inspection Readiness Report cost?
The report costs $250 with 24-hour delivery. It flags common Warwick issues including coastal wind resistance, Narragansett Bay salt-air material requirements, flood zone compliance, and airport overlay sound attenuation standards.
Does proximity to T.F. Green Airport affect building requirements?
Yes. Properties within the airport noise overlay zone must meet enhanced sound transmission class ratings for exterior walls and windows. The Warwick zoning office maintains maps showing affected parcels and required STC values.
What coastal construction requirements apply in Warwick?
Bayfront and flood-zone properties must use corrosion-resistant fasteners, marine-grade treated lumber for exposed framing, elevated mechanical equipment above base flood elevation, and enhanced wind-resistant roof connections per Rhode Island coastal provisions.
What do Warwick inspectors most commonly flag on residential projects?
Common citations include improper deck ledger flashing, missing hurricane clips on roof-to-wall connections, untreated lumber in salt-exposure zones, and insufficient insulation at rim joists in the coastal climate zone.
Also in Rhode Island