Cranston, Rhode Island
Find what your
punch list missed.
Send us photos and your tracking list. Get a written findings report within 24 hours* — before your inspector or auditor does.
— any industry with field inspections in Cranston.
*Depending on availability. We'll confirm turnaround when you submit.
Cranston projects fall under Rhode Island's SBC-1, which adopts the IBC and IRC with state-level amendments. Code Buddy's Inspection Readiness Report for Cranston is free with results delivered within 24 hours. The Pawtuxet River corridor and older residential neighborhoods mean inspectors pay close attention to flood-zone compliance, aging electrical panels, and salt-air corrosion on exterior fasteners.
Code BuddyPrepared for Acme Mechanical Inc.
Location
Cranston, RI
Date
Aug 8, 2026
Trade
Electrical
Findings
Penetration seal not matching approved submittal — visible gap at fire-rated assembly
Checked against: Company SOP 4.2
Fastener pattern deviates from manufacturer data sheet — 6" OC required, measured at 9" OC
Checked against: Project Spec 08-31
Working clearance below required minimum at panel — 30" required, 22" measured
Checked against: Applicable Standard
codebuddy.chatPage 1 of 4
Trusted by teams at
Three steps. Five minutes.
Submit your job, and our patent-pending AI technology reviews every photo against your standards, specs, and existing tracking.
Tell us about the job.
Project name, address in Cranston, and primary trade or discipline. We look up the applicable standards and regulations automatically from the address.
Send your photos and open items.
Upload directly, share a Drive/Dropbox link, or email them over. Your existing tracking sets the bar — anything already on it doesn't count as a finding.
Our patent-pending technology and AI system analyze every photo.
Cross-references each image against your specs, the applicable standards, and your existing tracking — helping identify deviations your list may have missed.
Get your report within 24 hours*.
Each finding includes the photo, the exact location, and the code section or spec it deviates from. Sorted by severity so you know what to fix first.
Built by Code Buddy.
Code Buddy is an AI-powered compliance platform used by thousands of field professionals across construction, energy, manufacturing, and fleet operations. Our patent-pending technology checks job site photos against codes, specs, and standards — the same technology that powers this report.
Built for the people who actually do the work.
Industries supported
Report turnaround
Limited availability
The kind of things we help catch.
Examples based on past reports. Each finding includes the photo, location, and the reference it was checked against.
Older Federal Pacific breaker panel in pre-1970 Cranston home lacks required arc-fault protection on bedroom circuits
Deck ledger board attachment missing flashing and lag bolts, relying on nails only into deteriorated rim joist
Pawtuxet River flood zone property missing required backflow preventer on sanitary sewer lateral
Ductwork in unconditioned crawlspace not insulated to R-8 minimum, condensation forming on exterior surfaces
Coastal exposure zone requires ring-shank nails for sheathing attachment but standard smooth-shank nails used throughout
Attic knee wall insulation batts installed without rigid backing, allowing air movement behind insulation layer
Send us one job. Get a full findings report. No cost, no commitment.
Every report is reviewed by a QA professional before delivery — not just generated and sent. That means we can only take a limited number each week.
GET YOUR FREE REPORTBefore you ask.
What building codes does Cranston enforce?
Cranston enforces the Rhode Island State Building Code (SBC-1), which adopts the International Building Code and International Residential Code with state-specific amendments covering wind loads and energy standards.
How much does an Inspection Readiness Report cost for my Cranston project?
The report is free per project and is delivered within 24 hours. It reviews your plans against current Cranston enforcement practices and flags items inspectors commonly cite in this area.
Does Cranston require special flood zone construction details?
Yes. Properties near the Pawtuxet River and other flood-prone areas must meet FEMA flood zone requirements including elevated utilities, flood-resistant materials below BFE, and backflow prevention on sewer connections.
Are there wind load requirements specific to Cranston?
Rhode Island's coastal location means Cranston falls under elevated wind speed design criteria. Roof sheathing, connections, and exterior cladding must meet the state-adopted wind provisions based on ASCE 7 maps.
What are the most common inspection failures in older Cranston neighborhoods?
Older homes frequently fail for outdated electrical panels without arc-fault protection, missing smoke and CO detectors on every level, inadequate egress windows in basement bedrooms, and deteriorated structural connections at deck ledgers.
Also in Rhode Island