Grand Forks, North Dakota
Find what your
punch list missed.
Send us photos and your tracking list. Get a written findings report within 24 hours* — before your inspector or auditor does.
— any industry with field inspections in Grand Forks.
$250, one time · Nothing new, no charge · You keep the report either way
*Depending on availability. We'll confirm turnaround when you submit.
Grand Forks, North Dakota contractors can get an Inspection Readiness Report for $250 with 24-hour turnaround. Submit your jobsite photos and tracking list to receive findings before the inspector arrives. Grand Forks experienced catastrophic flooding in 1997, and the city enforces strict flood plain construction standards alongside extreme cold climate requirements with frost depths exceeding 54 inches.
Code BuddyPrepared for Acme Mechanical Inc.
Location
Grand Forks, ND
Date
Aug 8, 2026
Trade
Electrical
Findings
Penetration seal not matching approved submittal — visible gap at fire-rated assembly
Checked against: Company SOP 4.2
Fastener pattern deviates from manufacturer data sheet — 6" OC required, measured at 9" OC
Checked against: Project Spec 08-31
Working clearance below required minimum at panel — 30" required, 22" measured
Checked against: Applicable Standard
codebuddy.chatPage 1 of 4
Trusted by teams at
Three steps. Five minutes.
Submit your job, and our patent-pending AI technology reviews every photo against your standards, specs, and existing tracking.
Tell us about the job.
Project name, address in Grand Forks, and primary trade or discipline. We look up the applicable standards and regulations automatically from the address.
Send your photos and open items.
Upload directly, share a Drive/Dropbox link, or email them over. Your existing tracking sets the bar — anything already on it doesn't count as a finding.
Our patent-pending technology and AI system analyze every photo.
Cross-references each image against your specs, the applicable standards, and your existing tracking — helping identify deviations your list may have missed.
Get your report within 24 hours*.
Each finding includes the photo, the exact location, and the code section or spec it deviates from. Sorted by severity so you know what to fix first.
Built by Code Buddy.
Code Buddy is an AI-powered compliance platform used by thousands of field professionals across construction, energy, manufacturing, and fleet operations. Our patent-pending technology checks job site photos against codes, specs, and standards — the same technology that powers this report.
Built for the people who actually do the work.
Industries supported
Report turnaround
If nothing new identified
The kind of things we help catch.
Examples based on past reports. Each finding includes the photo, location, and the reference it was checked against.
Finished floor elevation below required minimum in post-1997 flood plain overlay district near Red River
Below-grade sanitary piping missing backwater valve required in Grand Forks flood mitigation ordinance area
All electrical panels and meters must be installed above base flood elevation in mapped flood zone
Wind-driven snow infiltration path at intake louver not addressed with weather hood and screen protection
Vapor retarder on warm side of wall assembly installed with unsealed laps allowing moisture migration
Emergency egress window opening dimensions reduced by storm window frame, failing minimum clear opening size
And only if we identify something that wasn't already on your list.
If everything identified was already on your list, you pay nothing. You keep the report either way.
GET STARTEDLimited spots each week.
Every report is reviewed by a QA professional before delivery — not just generated and sent. That human review step means we can only take a limited number of jobs per week. Submissions are reviewed in the order they're received, and we'll let you know upfront if your report will take longer than 24 hours.
Before you ask.
Does Grand Forks have special flood construction requirements?
Yes. After the 1997 flood, Grand Forks adopted strict flood plain overlay district regulations. New construction in mapped zones must meet elevated floor requirements, use flood-resistant materials below base flood elevation, and include backwater valves. Inspectors verify these items at foundation and rough-in stages.
What frost depth is required in Grand Forks?
Grand Forks requires footings to extend at least 54 inches below grade for standard foundations. This is among the deepest frost depth requirements in the lower 48 states. Inspectors verify depth before concrete placement, and this is a frequent correction item on residential projects.
How does the $250 report address Grand Forks-specific issues?
The report flags flood plain compliance items, frost depth verification, wind-driven snow protection, and energy code requirements specific to Climate Zone 7. Grand Forks inspectors prioritize these regional items, and catching deficiencies in advance prevents costly re-inspections.
What wind and snow load requirements apply in Grand Forks?
Grand Forks requires design for ground snow loads of 40 psf or higher plus drift loading calculations. Wind-driven snow infiltration at louvers and vents is a common inspection item. Truss engineering must match approved loads, and inspectors verify connector hardware installation.
Are there special requirements for agricultural buildings near Grand Forks?
Agricultural buildings in the Grand Forks area follow specific occupancy and structural classifications. Snow load and wind load requirements apply to all structures regardless of agricultural use. Heated animal confinement buildings must meet ventilation and energy code requirements appropriate to their occupancy type.