St. Louis, Missouri
Find what your
punch list missed.
Send us photos and your tracking list. Get a written findings report within 24 hours* — before your inspector or auditor does.
— any industry with field inspections in St. Louis.
$250, one time · Nothing new, no charge · You keep the report either way
*Depending on availability. We'll confirm turnaround when you submit.
St. Louis, Missouri contractors can get an Inspection Readiness Report for $250 with 24-hour turnaround. Submit jobsite photos and your tracking list to receive findings before the inspector arrives. St. Louis sits near the New Madrid Seismic Zone, and inspectors enforce seismic detailing requirements alongside Mississippi River flood plain provisions that many contractors overlook.
Code BuddyPrepared for Acme Mechanical Inc.
Location
St. Louis, MO
Date
Aug 8, 2026
Trade
Electrical
Findings
Penetration seal not matching approved submittal — visible gap at fire-rated assembly
Checked against: Company SOP 4.2
Fastener pattern deviates from manufacturer data sheet — 6" OC required, measured at 9" OC
Checked against: Project Spec 08-31
Working clearance below required minimum at panel — 30" required, 22" measured
Checked against: Applicable Standard
codebuddy.chatPage 1 of 4
Trusted by teams at
Three steps. Five minutes.
Submit your job, and our patent-pending AI technology reviews every photo against your standards, specs, and existing tracking.
Tell us about the job.
Project name, address in St. Louis, and primary trade or discipline. We look up the applicable standards and regulations automatically from the address.
Send your photos and open items.
Upload directly, share a Drive/Dropbox link, or email them over. Your existing tracking sets the bar — anything already on it doesn't count as a finding.
Our patent-pending technology and AI system analyze every photo.
Cross-references each image against your specs, the applicable standards, and your existing tracking — helping identify deviations your list may have missed.
Get your report within 24 hours*.
Each finding includes the photo, the exact location, and the code section or spec it deviates from. Sorted by severity so you know what to fix first.
Built by Code Buddy.
Code Buddy is an AI-powered compliance platform used by thousands of field professionals across construction, energy, manufacturing, and fleet operations. Our patent-pending technology checks job site photos against codes, specs, and standards — the same technology that powers this report.
Built for the people who actually do the work.
Industries supported
Report turnaround
If nothing new identified
The kind of things we help catch.
Examples based on past reports. Each finding includes the photo, location, and the reference it was checked against.
Seismic bracing missing on masonry veneer ties at intervals required by St. Louis seismic design category
Panel directory incomplete with unlabeled breakers, violating NEC circuit identification requirements for occupancy
Flood-resistant construction materials not used below base flood elevation in Mississippi River flood zone
Seismic restraint straps missing on suspended HVAC equipment exceeding weight threshold for bracing requirement
Fire damper missing at rated wall penetration where ductwork crosses two-hour fire-rated corridor assembly
Accessible route slope at building entrance exceeds 1:20 running slope maximum for walking surfaces
And only if we identify something that wasn't already on your list.
If everything identified was already on your list, you pay nothing. You keep the report either way.
GET STARTEDLimited spots each week.
Every report is reviewed by a QA professional before delivery — not just generated and sent. That human review step means we can only take a limited number of jobs per week. Submissions are reviewed in the order they're received, and we'll let you know upfront if your report will take longer than 24 hours.
Before you ask.
Does St. Louis enforce seismic requirements on residential projects?
Yes. St. Louis is in Seismic Design Category C or higher due to proximity to the New Madrid Seismic Zone. Residential projects must include seismic detailing such as anchor bolt spacing, masonry veneer ties, and braced wall panel requirements. Inspectors actively check these items.
What flood plain rules apply in St. Louis?
Properties in FEMA-mapped flood zones along the Mississippi River must comply with elevated construction standards. Required items include minimum finished floor elevation above base flood elevation, flood-resistant materials below that line, and backwater valves. These are common inspection failure points in St. Louis.
How does the St. Louis inspection process work?
St. Louis Building Department schedules inspections after permit holders submit requests. Typical wait times are two to four business days. The city is an independent jurisdiction separate from St. Louis County, so confirm you are working with the correct department for your project location.
What does the $250 Inspection Readiness Report cover?
The report reviews all trades visible in your submitted photos and tracking list. For St. Louis projects, it specifically flags seismic detailing, flood plain compliance, and fire-rated assembly items that local inspectors prioritize. Findings include severity levels and code references.
Is St. Louis City separate from St. Louis County for code enforcement?
Yes. St. Louis City and St. Louis County are entirely separate jurisdictions with independent building departments, code adoptions, and amendment packages. Make sure your permit and inspection requests go to the correct authority having jurisdiction for your project address.
Also in Missouri