Electrical · Peoria, Illinois
Electrical inspection readiness
for Peoria.
Send us photos of your electrical work and your tracking list. Get a written findings report within 24 hours* — before your inspector does.
Panels, wiring, conduit, grounding, AFCI/GFCI, service equipment, and NEC compliance.
$250, one time · Nothing new, no charge · You keep the report either way
*Depending on availability. We'll confirm turnaround when you submit.
Code Buddy's Inspection Readiness Report checks your electrical work in Peoria, Illinois against the codes and specs that apply. Send photos of panels, wiring, conduit, grounding, afci/gfci, service equipment, and nec compliance and your tracking list — get a written findings report within 24 hours* scoring every item. $250, one time — nothing new found, no charge.
Trusted by teams at
Common questions
What teams ask about electrical inspections in Peoria
These are the questions field teams ask before an inspection. Our report answers all of them for your specific job.
how do I prepare for an electrical inspection in Peoria?
electrical inspection checklist in Peoria?
what do electrical inspectors look for in Peoria?
pre-inspection review electrical in Peoria?
electrical rough-in inspection prep in Peoria?
Three steps. Five minutes.
Submit your electrical job, and our patent-pending AI reviews every photo against the standards that apply in Peoria.
Tell us about your electrical job.
Project name, address in Peoria, and scope. We look up the applicable standards automatically.
Send photos of your electrical work.
Upload directly, share a Drive/Dropbox link, or email them. Your existing tracking sets the bar.
AI reviews every photo.
Cross-references against codes, specs, and your tracking — flagging electrical deviations your list missed.
Get your report within 24 hours*.
Each finding includes the photo, location, and reference. Sorted by severity.
Electrical findings we help catch in Peoria.
Examples based on past reports — each includes the photo, location, and the reference checked against.
Foundation wall crack exceeds 1/4-inch width with horizontal displacement indicating active lateral soil pressure from bluff-side backfill
Renovation project ties new 15-amp AFCI circuit into existing ungrounded knob-and-tube wiring at junction box splice
Replacement furnace installed in alcove with insufficient combustion air opening, providing only 60 square inches instead of required 100
Hardwired smoke detector in renovated hallway not interconnected with existing battery units in adjacent bedrooms per NFPA 72
And only if we identify something that wasn't already on your list.
If everything identified was already on your list, you pay nothing. You keep the report either way.
GET YOUR ELECTRICAL REPORTLimited spots each week.
Every report is reviewed by a QA professional before delivery. Submissions are reviewed in order received.