Davenport, Iowa
Find what your
punch list missed.
Send us photos and your tracking list. Get a written findings report within 24 hours* — before your inspector or auditor does.
— any industry with field inspections in Davenport.
$250, one time · Nothing new, no charge · You keep the report either way
*Depending on availability. We'll confirm turnaround when you submit.
The Davenport Inspection Readiness Report is a one-time $250 service with 24-hour turnaround. Upload your project photos and tracking list to receive findings before the inspector visits. Davenport sits in the Quad Cities along the Mississippi River, where inspectors focus on riverfront foundation drainage, freeze-thaw concrete protection, and wind resistance details due to the area's tornado corridor exposure.
Code BuddyPrepared for Acme Mechanical Inc.
Location
Davenport, IA
Date
Aug 8, 2026
Trade
Electrical
Findings
Penetration seal not matching approved submittal — visible gap at fire-rated assembly
Checked against: Company SOP 4.2
Fastener pattern deviates from manufacturer data sheet — 6" OC required, measured at 9" OC
Checked against: Project Spec 08-31
Working clearance below required minimum at panel — 30" required, 22" measured
Checked against: Applicable Standard
codebuddy.chatPage 1 of 4
Trusted by teams at
Three steps. Five minutes.
Submit your job, and our patent-pending AI technology reviews every photo against your standards, specs, and existing tracking.
Tell us about the job.
Project name, address in Davenport, and primary trade or discipline. We look up the applicable standards and regulations automatically from the address.
Send your photos and open items.
Upload directly, share a Drive/Dropbox link, or email them over. Your existing tracking sets the bar — anything already on it doesn't count as a finding.
Our patent-pending technology and AI system analyze every photo.
Cross-references each image against your specs, the applicable standards, and your existing tracking — helping identify deviations your list may have missed.
Get your report within 24 hours*.
Each finding includes the photo, the exact location, and the code section or spec it deviates from. Sorted by severity so you know what to fix first.
Built by Code Buddy.
Code Buddy is an AI-powered compliance platform used by thousands of field professionals across construction, energy, manufacturing, and fleet operations. Our patent-pending technology checks job site photos against codes, specs, and standards — the same technology that powers this report.
Built for the people who actually do the work.
Industries supported
Report turnaround
If nothing new identified
The kind of things we help catch.
Examples based on past reports. Each finding includes the photo, location, and the reference it was checked against.
Anchor bolt spacing on mudsill exceeds 6-foot maximum, leaving sections of the sill plate unsecured against wind uplift loads
Outdoor receptacle on river-facing elevation lacks in-use weatherproof cover rated for wet locations per NEC 406.9
Water heater in basement lacks expansion tank on closed-loop system, creating thermal expansion pressure risk during heating cycles
Ductwork penetration through garage firewall unsealed with fire-rated material, compromising required one-hour separation
Carbon monoxide detector missing from basement level containing gas-fired appliance, required within 15 feet of sleeping areas
Exterior foam insulation board left exposed below grade without protective coating or flashing at the soil line
And only if we identify something that wasn't already on your list.
If everything identified was already on your list, you pay nothing. You keep the report either way.
GET STARTEDLimited spots each week.
Every report is reviewed by a QA professional before delivery — not just generated and sent. That human review step means we can only take a limited number of jobs per week. Submissions are reviewed in the order they're received, and we'll let you know upfront if your report will take longer than 24 hours.
Before you ask.
What wind load requirements do Davenport inspectors enforce?
Davenport falls in a 90-mph basic wind speed zone. Inspectors verify anchor bolt spacing, hurricane clip installation on roof-to-wall connections, and proper sheathing nailing schedules. Projects near the Mississippi bluffs may face additional exposure scrutiny.
How does the $250 readiness report work for Davenport projects?
Submit your photos and tracking list through the platform. Within 24 hours, you receive a detailed report identifying potential inspection failures. The report is project-specific and covers all trades shown in your photos.
Are there Quad Cities-specific code requirements I should know about?
Davenport follows Iowa code adoption cycles, which differ from the Illinois side of the Quad Cities. Flood plain construction near the Mississippi requires elevated mechanical equipment and specific foundation waterproofing that inspectors verify carefully.
What basement inspection items fail most often in Davenport?
Missing GFCI protection on basement receptacles, inadequate egress window well dimensions, improperly sloped foundation drains, and absent carbon monoxide detectors near gas appliances are the most frequent basement-related failures.
Can I use the report for commercial projects in Davenport?
Yes. The report works for both residential and commercial projects. Commercial inspections in Davenport often involve additional fire separation, accessibility, and energy code items that the report covers when relevant photos are submitted.
Also in Iowa