Cedar Rapids, Iowa
Find what your
punch list missed.
Send us photos and your tracking list. Get a written findings report within 24 hours* — before your inspector or auditor does.
— any industry with field inspections in Cedar Rapids.
$250, one time · Nothing new, no charge · You keep the report either way
*Depending on availability. We'll confirm turnaround when you submit.
The Cedar Rapids Inspection Readiness Report is a one-time $250 service with 24-hour turnaround. Submit your project photos and tracking list, and receive a detailed findings report before the inspector arrives. Cedar Rapids sits in a flood-prone corridor along the Cedar River, and inspectors pay close attention to basement waterproofing, frost-depth footings, and stormwater management details that reflect the area's severe weather history.
Code BuddyPrepared for Acme Mechanical Inc.
Location
Cedar Rapids, IA
Date
Aug 8, 2026
Trade
Electrical
Findings
Penetration seal not matching approved submittal — visible gap at fire-rated assembly
Checked against: Company SOP 4.2
Fastener pattern deviates from manufacturer data sheet — 6" OC required, measured at 9" OC
Checked against: Project Spec 08-31
Working clearance below required minimum at panel — 30" required, 22" measured
Checked against: Applicable Standard
codebuddy.chatPage 1 of 4
Trusted by teams at
Three steps. Five minutes.
Submit your job, and our patent-pending AI technology reviews every photo against your standards, specs, and existing tracking.
Tell us about the job.
Project name, address in Cedar Rapids, and primary trade or discipline. We look up the applicable standards and regulations automatically from the address.
Send your photos and open items.
Upload directly, share a Drive/Dropbox link, or email them over. Your existing tracking sets the bar — anything already on it doesn't count as a finding.
Our patent-pending technology and AI system analyze every photo.
Cross-references each image against your specs, the applicable standards, and your existing tracking — helping identify deviations your list may have missed.
Get your report within 24 hours*.
Each finding includes the photo, the exact location, and the code section or spec it deviates from. Sorted by severity so you know what to fix first.
Built by Code Buddy.
Code Buddy is an AI-powered compliance platform used by thousands of field professionals across construction, energy, manufacturing, and fleet operations. Our patent-pending technology checks job site photos against codes, specs, and standards — the same technology that powers this report.
Built for the people who actually do the work.
Industries supported
Report turnaround
If nothing new identified
The kind of things we help catch.
Examples based on past reports. Each finding includes the photo, location, and the reference it was checked against.
Footing depth measured at 36 inches, below the required 42-inch frost line depth for Cedar Rapids per Iowa Building Code
Sump pump discharge line terminates less than 10 feet from foundation wall, risking re-infiltration during spring flood season
Missing GFCI protection at basement sump pump outlet located within 6 feet of grade-level egress door
Furnace combustion air intake positioned below documented 2008 flood elevation without protective damper or backflow preventer
Vapor barrier in crawlspace shows unsealed lap joints at seams, allowing moisture migration into floor assembly
Smoke detector in basement mechanical room mounted on ceiling joist rather than on the flat ceiling surface per NFPA 72
And only if we identify something that wasn't already on your list.
If everything identified was already on your list, you pay nothing. You keep the report either way.
GET STARTEDLimited spots each week.
Every report is reviewed by a QA professional before delivery — not just generated and sent. That human review step means we can only take a limited number of jobs per week. Submissions are reviewed in the order they're received, and we'll let you know upfront if your report will take longer than 24 hours.
Before you ask.
What frost depth do Cedar Rapids inspectors verify for footings?
Cedar Rapids requires a minimum 42-inch footing depth to account for Iowa's frost line. Inspectors measure exposed footings before concrete placement and will fail any footing that does not meet this depth requirement.
How quickly will I receive my Cedar Rapids readiness report?
Reports are delivered within 24 hours of submitting your photos and tracking list. Most reports arrive same-day for submissions received before noon. The one-time cost is $250 regardless of project size.
Are flood-zone requirements commonly flagged in this area?
Yes. After the 2008 flood, Cedar Rapids adopted stricter stormwater and basement waterproofing standards. Inspectors routinely check sump discharge locations, foundation drainage, and mechanical equipment elevation in flood-prone zones.
What are the most common inspection failures for residential projects here?
Shallow footings below frost depth, missing GFCI protection at basement receptacles, improperly sealed vapor barriers, and inadequate combustion air for furnaces are the top fail items in Cedar Rapids residential inspections.
Does the report cover all trades or just one?
The report covers all trades relevant to your project, including electrical, plumbing, mechanical, structural, and fire protection. Submit photos of every area scheduled for inspection and the report addresses each one.
Also in Iowa