Dover, Delaware
Find what your
punch list missed.
Send us photos and your tracking list. Get a written findings report within 24 hours* — before your inspector or auditor does.
— any industry with field inspections in Dover.
$250, one time · Nothing new, no charge · You keep the report either way
*Depending on availability. We'll confirm turnaround when you submit.
Dover enforces Delaware's adopted IRC and IBC codes across its flat, flood-prone capital district. CodeBuddy's Inspection Readiness Report costs $250 with 24-hour turnaround and flags issues common to government and institutional buildings near Dover Air Force Base, including wind uplift details for low-slope roofs on the coastal plain and freeze-thaw drainage requirements for flat-grade sites.
Code BuddyPrepared for Acme Mechanical Inc.
Location
Dover, DE
Date
Aug 8, 2026
Trade
Electrical
Findings
Penetration seal not matching approved submittal — visible gap at fire-rated assembly
Checked against: Company SOP 4.2
Fastener pattern deviates from manufacturer data sheet — 6" OC required, measured at 9" OC
Checked against: Project Spec 08-31
Working clearance below required minimum at panel — 30" required, 22" measured
Checked against: Applicable Standard
codebuddy.chatPage 1 of 4
Trusted by teams at
Three steps. Five minutes.
Submit your job, and our patent-pending AI technology reviews every photo against your standards, specs, and existing tracking.
Tell us about the job.
Project name, address in Dover, and primary trade or discipline. We look up the applicable standards and regulations automatically from the address.
Send your photos and open items.
Upload directly, share a Drive/Dropbox link, or email them over. Your existing tracking sets the bar — anything already on it doesn't count as a finding.
Our patent-pending technology and AI system analyze every photo.
Cross-references each image against your specs, the applicable standards, and your existing tracking — helping identify deviations your list may have missed.
Get your report within 24 hours*.
Each finding includes the photo, the exact location, and the code section or spec it deviates from. Sorted by severity so you know what to fix first.
Built by Code Buddy.
Code Buddy is an AI-powered compliance platform used by thousands of field professionals across construction, energy, manufacturing, and fleet operations. Our patent-pending technology checks job site photos against codes, specs, and standards — the same technology that powers this report.
Built for the people who actually do the work.
Industries supported
Report turnaround
If nothing new identified
The kind of things we help catch.
Examples based on past reports. Each finding includes the photo, location, and the reference it was checked against.
Roof truss bracing omits continuous lateral restraint required for flat-terrain wind exposure category C common near Dover AFB
Backflow preventer missing on irrigation tie-in to municipal water serving state government campus building
Generator transfer switch for emergency circuits lacks 10-second pickup time required for government occupancy classification
Rooftop condensate drain terminates over flat roof membrane without secondary containment per manufacturer specs on coastal plain site
Fire alarm notification appliance spacing exceeds 15-foot maximum along corridors in institutional occupancy wing
Below-slab vapor barrier seams not taped at overlap creating moisture path in high-water-table area typical of Kent County
And only if we identify something that wasn't already on your list.
If everything identified was already on your list, you pay nothing. You keep the report either way.
GET STARTEDLimited spots each week.
Every report is reviewed by a QA professional before delivery — not just generated and sent. That human review step means we can only take a limited number of jobs per week. Submissions are reviewed in the order they're received, and we'll let you know upfront if your report will take longer than 24 hours.
Before you ask.
What codes does Dover enforce for residential construction?
Dover follows Delaware's statewide adopted International Residential Code with local amendments. The Dover Building Department reviews permits against these codes, and inspectors verify compliance at each required stage of construction.
How does the flat terrain around Dover affect wind load requirements?
Dover's coastal plain topography with few obstructions typically places projects in wind exposure category C. This increases design wind pressures on roofs and walls, requiring stronger connections and bracing than sheltered inland sites.
Are there special drainage requirements for Dover building sites?
Yes. Kent County's high water table and flat grade mean stormwater management plans must address positive drainage away from foundations. Dover inspectors check grading, sump systems, and downspout discharge distances at the final inspection.
What does the $250 Inspection Readiness Report include?
The report delivers a trade-by-trade review of your plans against Dover's adopted codes within 24 hours. It identifies likely inspection failures, missing details, and code conflicts so you can resolve them before the inspector arrives on site.
Does Dover require special permits near the Air Force Base flight path?
Construction near Dover Air Force Base may trigger height restrictions and FAA notification requirements. The Dover Building Department coordinates with federal agencies when projects fall within approach and departure zones.
Also in Delaware