New Haven, Connecticut
Find what your
punch list missed.
Send us photos and your tracking list. Get a written findings report within 24 hours* — before your inspector or auditor does.
— any industry with field inspections in New Haven.
$250, one time · Nothing new, no charge · You keep the report either way
*Depending on availability. We'll confirm turnaround when you submit.
New Haven's mix of historic districts, university-adjacent development, and coastal exposure creates layered inspection requirements. Code Buddy's Inspection Readiness Report for New Haven costs $250 with 24-hour turnaround, catching issues like historic preservation conflicts with energy code upgrades, mixed-use occupancy separations near the Yale campus, and coastal storm surge compliance.
Code BuddyPrepared for Acme Mechanical Inc.
Location
New Haven, CT
Date
Aug 8, 2026
Trade
Electrical
Findings
Penetration seal not matching approved submittal — visible gap at fire-rated assembly
Checked against: Company SOP 4.2
Fastener pattern deviates from manufacturer data sheet — 6" OC required, measured at 9" OC
Checked against: Project Spec 08-31
Working clearance below required minimum at panel — 30" required, 22" measured
Checked against: Applicable Standard
codebuddy.chatPage 1 of 4
Trusted by teams at
Three steps. Five minutes.
Submit your job, and our patent-pending AI technology reviews every photo against your standards, specs, and existing tracking.
Tell us about the job.
Project name, address in New Haven, and primary trade or discipline. We look up the applicable standards and regulations automatically from the address.
Send your photos and open items.
Upload directly, share a Drive/Dropbox link, or email them over. Your existing tracking sets the bar — anything already on it doesn't count as a finding.
Our patent-pending technology and AI system analyze every photo.
Cross-references each image against your specs, the applicable standards, and your existing tracking — helping identify deviations your list may have missed.
Get your report within 24 hours*.
Each finding includes the photo, the exact location, and the code section or spec it deviates from. Sorted by severity so you know what to fix first.
Built by Code Buddy.
Code Buddy is an AI-powered compliance platform used by thousands of field professionals across construction, energy, manufacturing, and fleet operations. Our patent-pending technology checks job site photos against codes, specs, and standards — the same technology that powers this report.
Built for the people who actually do the work.
Industries supported
Report turnaround
If nothing new identified
The kind of things we help catch.
Examples based on past reports. Each finding includes the photo, location, and the reference it was checked against.
Replacement windows in New Haven historic district do not match approved muntin profile and will trigger Historic District Commission rejection
New third-floor addition on two-story mixed-use building near Yale campus lacks lateral bracing analysis for wind uplift in coastal zone
Ground-floor retail tenant fit-out in mixed-use building missing separate metering and disconnecting means per CT electrical code
Grease interceptor undersized for new restaurant occupancy in converted New Haven storefront based on fixture unit count and menu type
Exterior insulation finish system on coastal-facing wall lacks rain screen drainage gap, risking moisture entrapment in freeze-thaw conditions
Assembly occupancy above ground-floor retail exceeds 300 persons but second exit stair width does not meet egress capacity requirements
And only if we identify something that wasn't already on your list.
If everything identified was already on your list, you pay nothing. You keep the report either way.
GET STARTEDLimited spots each week.
Every report is reviewed by a QA professional before delivery — not just generated and sent. That human review step means we can only take a limited number of jobs per week. Submissions are reviewed in the order they're received, and we'll let you know upfront if your report will take longer than 24 hours.
Before you ask.
What codes does New Haven enforce for building projects?
New Haven enforces the 2018 Connecticut State Building Code based on the 2015 IBC and IRC. Projects in local historic districts must also satisfy the New Haven Historic District Commission review for exterior alterations.
How does Code Buddy handle New Haven historic district requirements?
The report flags where code-required upgrades like energy improvements or egress modifications may conflict with historic preservation standards, so you can coordinate with the Historic District Commission before inspection day.
What is the cost and turnaround for the Inspection Readiness Report?
The report costs $250 and is delivered within 24 hours. It includes a trade-by-trade code review, a prioritized list of likely inspection failures, and specific CT code section references for each finding.
Does the report cover mixed-use buildings common near Yale in New Haven?
Yes. Mixed-use projects near the Yale campus are reviewed for occupancy separation, independent egress paths, separate utility metering, and fire-resistance ratings between commercial and residential portions of the building.
Are coastal storm risks addressed for New Haven waterfront projects?
The report checks FEMA flood map compliance for New Haven's Long Island Sound shoreline, including freeboard requirements, flood-resistant materials below base flood elevation, and mechanical equipment elevation above surge levels.
Also in Connecticut