Pima County, Arizona
Find what your
punch list missed.
Send us photos and your tracking list. Get a written findings report within 24 hours* — before your inspector or auditor does.
Electrical, general construction, residential, mechanical — any industry with field inspections in Pima County.
$250, one time · Nothing new, no charge · You keep the report either way
*Depending on availability. We'll confirm turnaround when you submit.
Pima County, Arizona covers a vast unincorporated area south of Tucson with solar farm development, rural residential construction, and mining support infrastructure. Remote project locations and long inspector travel times make failed inspections especially costly. Code Buddy's Inspection Readiness Report is $250, delivers findings within 24 hours, and helps Pima County contractors avoid re-inspection trips on hard-to-reach sites.
Code BuddyPrepared for Acme Mechanical Inc.
Location
Pima County, AZ
Date
Aug 8, 2026
Trade
Electrical
Findings
Penetration seal not matching approved submittal — visible gap at fire-rated assembly
Checked against: Company SOP 4.2
Fastener pattern deviates from manufacturer data sheet — 6" OC required, measured at 9" OC
Checked against: Project Spec 08-31
Working clearance below required minimum at panel — 30" required, 22" measured
Checked against: Applicable Standard
codebuddy.chatPage 1 of 4
Trusted by teams at
Three steps. Five minutes.
Submit your job, and our patent-pending AI technology reviews every photo against your standards, specs, and existing tracking.
Tell us about the job.
Project name, address in Pima County, and primary trade or discipline. We look up the applicable standards and regulations automatically from the address.
Send your photos and open items.
Upload directly, share a Drive/Dropbox link, or email them over. Your existing tracking sets the bar — anything already on it doesn't count as a finding.
Our patent-pending technology and AI system analyze every photo.
Cross-references each image against your specs, the applicable standards, and your existing tracking — helping identify deviations your list may have missed.
Get your report within 24 hours*.
Each finding includes the photo, the exact location, and the code section or spec it deviates from. Sorted by severity so you know what to fix first.
Built by Code Buddy.
Code Buddy is an AI-powered compliance platform used by thousands of field professionals across construction, energy, manufacturing, and fleet operations. Our patent-pending technology checks job site photos against codes, specs, and standards — the same technology that powers this report.
Built for the people who actually do the work.
Industries supported
Report turnaround
If nothing new identified
The kind of things we help catch.
Examples based on past reports. Each finding includes the photo, location, and the reference it was checked against.
Ground-mounted solar array grounding electrode conductor undersized for system capacity — NEC 250.166 minimum not met at combiner box
Residential service entrance on rural property lacks required clearance from propane tank — NEC 110.26 working space violated
Manufactured home foundation pier spacing exceeds HUD installation manual maximum — desert wind loads require closer spacing in exposed areas
Septic system distribution box not level — effluent will short-circuit to one leach field trench in Pima County's caliche soil
Evaporative cooler ductwork routed through unconditioned attic without insulation — heat gain defeats cooling capacity in desert summer
Gravel road access to construction site does not meet fire apparatus access width requirement — 20-foot minimum for Pima County permits
And only if we identify something that wasn't already on your list.
If everything identified was already on your list, you pay nothing. You keep the report either way.
GET STARTEDLimited spots each week.
Every report is reviewed by a QA professional before delivery — not just generated and sent. That human review step means we can only take a limited number of jobs per week. Submissions are reviewed in the order they're received, and we'll let you know upfront if your report will take longer than 24 hours.
Before you ask.
Why is a pre-inspection review especially valuable in Pima County?
Pima County's unincorporated areas mean long inspector travel times. A failed inspection can cost two to three weeks of delay waiting for a re-inspection slot. The $250 report helps you pass the first time.
Does the report cover solar farm installations in Pima County?
Yes. Ground-mounted and roof-mounted solar systems are fully supported. We review grounding, conductor sizing, rapid shutdown, and structural mounting against NEC and Pima County requirements within 24 hours.
Can Code Buddy review septic and well-related items?
We review septic system components visible in photos — distribution boxes, tank placement, and leach field layout. We do not replace percolation testing or ADEQ site evaluations, but we flag visible installation issues.
What about manufactured and modular home inspections in Pima County?
Yes. Foundation piers, tie-downs, electrical service, and skirting are common inspection items for manufactured homes in Pima County. Send photos and we review against HUD and local requirements.
How do I submit photos from a remote Pima County job site?
Upload through the form, share a cloud folder, or email them. Cell service can be limited on remote sites — take photos on site and upload when you have connectivity. We return findings within 24 hours of receipt.