Chandler, Arizona
Find what your
punch list missed.
Send us photos and your tracking list. Get a written findings report within 24 hours* — before your inspector or auditor does.
Electrical, general construction, residential, mechanical — any industry with field inspections in Chandler.
$250, one time · Nothing new, no charge · You keep the report either way
*Depending on availability. We'll confirm turnaround when you submit.
Chandler, Arizona sits at the center of the state's semiconductor and data center corridor, with Intel and other tech manufacturers driving large-scale commercial and industrial construction. Extreme desert heat stresses electrical and mechanical systems in ways most code books don't emphasize. Code Buddy's Inspection Readiness Report is $250, delivers a written findings report within 24 hours, and catches what Chandler's tech-heavy projects miss most.
Code BuddyPrepared for Acme Mechanical Inc.
Location
Chandler, AZ
Date
Aug 8, 2026
Trade
Electrical
Findings
Penetration seal not matching approved submittal — visible gap at fire-rated assembly
Checked against: Company SOP 4.2
Fastener pattern deviates from manufacturer data sheet — 6" OC required, measured at 9" OC
Checked against: Project Spec 08-31
Working clearance below required minimum at panel — 30" required, 22" measured
Checked against: Applicable Standard
codebuddy.chatPage 1 of 4
Trusted by teams at
Three steps. Five minutes.
Submit your job, and our patent-pending AI technology reviews every photo against your standards, specs, and existing tracking.
Tell us about the job.
Project name, address in Chandler, and primary trade or discipline. We look up the applicable standards and regulations automatically from the address.
Send your photos and open items.
Upload directly, share a Drive/Dropbox link, or email them over. Your existing tracking sets the bar — anything already on it doesn't count as a finding.
Our patent-pending technology and AI system analyze every photo.
Cross-references each image against your specs, the applicable standards, and your existing tracking — helping identify deviations your list may have missed.
Get your report within 24 hours*.
Each finding includes the photo, the exact location, and the code section or spec it deviates from. Sorted by severity so you know what to fix first.
Built by Code Buddy.
Code Buddy is an AI-powered compliance platform used by thousands of field professionals across construction, energy, manufacturing, and fleet operations. Our patent-pending technology checks job site photos against codes, specs, and standards — the same technology that powers this report.
Built for the people who actually do the work.
Industries supported
Report turnaround
If nothing new identified
The kind of things we help catch.
Examples based on past reports. Each finding includes the photo, location, and the reference it was checked against.
Data center PDU feeder conductor ampacity not derated for ambient temperature exceeding 104 degrees — NEC 310.15 correction required
Precision cooling unit condensate pump lacks secondary overflow sensor — required in raised floor environments to prevent equipment damage
Clean agent suppression system discharge sign missing from data hall entrance — NFPA 2001 signage requirement for occupied spaces
Emergency generator transfer switch lacks required 10-second startup verification test documentation on site
Industrial process waste line connected to sanitary sewer without required neutralization tank — Chandler pretreatment ordinance applies
Elevated equipment pad anchor bolts show UV-degraded expansion anchors — desert sun exposure reduced pull-out strength below rated capacity
And only if we identify something that wasn't already on your list.
If everything identified was already on your list, you pay nothing. You keep the report either way.
GET STARTEDLimited spots each week.
Every report is reviewed by a QA professional before delivery — not just generated and sent. That human review step means we can only take a limited number of jobs per week. Submissions are reviewed in the order they're received, and we'll let you know upfront if your report will take longer than 24 hours.
Before you ask.
Can Code Buddy review data center and tech facility projects in Chandler?
Yes. Data centers, semiconductor fabs, and clean rooms are fully supported. We review electrical distribution, fire suppression, precision cooling, and structural items against applicable codes for $250.
Does the report account for Chandler's industrial pretreatment requirements?
Yes. Chandler enforces pretreatment and waste discharge standards for industrial facilities. We flag plumbing and process waste connections that may not comply with local ordinances.
How fast do I get the Chandler Readiness Report back?
Within 24 hours. Most reports for Chandler projects are returned the same business day. Submit your photos and open items list through the form and we start immediately.
Why does desert heat matter for electrical inspections?
Ambient temperatures above 104 degrees require conductor ampacity derating under NEC 310.15. In Chandler's climate, this affects outdoor feeders, rooftop equipment, and unconditioned mechanical rooms year-round.
What if my project passes everything — do I still pay?
No. If the report finds nothing beyond your existing open items, there is no charge. The $250 fee only applies when we surface new findings.
Also in Arizona