Fire Protection · Milwaukee County, Wisconsin
Fire Protection inspection readiness
for Milwaukee County.
Send us photos of your fire protection work and your tracking list. Get a written findings report within 24 hours* — before your inspector does.
Sprinklers, fire alarms, egress, fire stopping, extinguishers, and fire code compliance.
$250, one time · Nothing new, no charge · You keep the report either way
*Depending on availability. We'll confirm turnaround when you submit.
Code Buddy's Inspection Readiness Report checks your fire protection work in Milwaukee County, Wisconsin against the codes and specs that apply. Send photos of sprinklers, fire alarms, egress, fire stopping, extinguishers, and fire code compliance and your tracking list — get a written findings report within 24 hours* scoring every item. $250, one time — nothing new found, no charge.
Trusted by teams at
Common questions
What teams ask about fire protection inspections in Milwaukee County
These are the questions field teams ask before an inspection. Our report answers all of them for your specific job.
fire inspection preparation in Milwaukee County?
fire sprinkler inspection checklist in Milwaukee County?
fire alarm inspection requirements in Milwaukee County?
fire marshal walkthrough prep in Milwaukee County?
fire life safety inspection in Milwaukee County?
Three steps. Five minutes.
Submit your fire protection job, and our patent-pending AI reviews every photo against the standards that apply in Milwaukee County.
Tell us about your fire protection job.
Project name, address in Milwaukee County, and scope. We look up the applicable standards automatically.
Send photos of your fire protection work.
Upload directly, share a Drive/Dropbox link, or email them. Your existing tracking sets the bar.
AI reviews every photo.
Cross-references against codes, specs, and your tracking — flagging fire protection deviations your list missed.
Get your report within 24 hours*.
Each finding includes the photo, location, and reference. Sorted by severity.
Fire Protection findings we help catch in Milwaukee County.
Examples based on past reports — each includes the photo, location, and the reference checked against.
Frost-depth footing poured at 36 inches instead of required 48-inch depth for Milwaukee County frost line
Residential service upgrade to 200 amps missing required four-foot clearance in front of panel per NEC 110.26
Window U-factor rating of 0.32 does not meet Milwaukee County energy code maximum of 0.30 for Climate Zone 6
Smoke detector in basement mechanical room positioned within 3 feet of HVAC supply register causing nuisance trips
And only if we identify something that wasn't already on your list.
If everything identified was already on your list, you pay nothing. You keep the report either way.
GET YOUR FIRE PROTECTION REPORTLimited spots each week.
Every report is reviewed by a QA professional before delivery. Submissions are reviewed in order received.