Santa Fe, New Mexico
Find what your
punch list missed.
Send us photos and your tracking list. Get a written findings report within 24 hours* — before your inspector or auditor does.
— any industry with field inspections in Santa Fe.
$250, one time · Nothing new, no charge · You keep the report either way
*Depending on availability. We'll confirm turnaround when you submit.
Santa Fe enforces New Mexico construction codes alongside strict historic district design standards governing adobe, stucco, and pueblo-revival architecture at 7,000-foot elevation. High altitude brings intense UV, freeze-thaw cycling, and monsoon moisture that demand careful material selection and detailing. CodeBuddy reviews your Santa Fe plans for $250 with 24-hour turnaround, covering both code compliance and climate-specific construction requirements.
Code BuddyPrepared for Acme Mechanical Inc.
Location
Santa Fe, NM
Date
Aug 8, 2026
Trade
Electrical
Findings
Penetration seal not matching approved submittal — visible gap at fire-rated assembly
Checked against: Company SOP 4.2
Fastener pattern deviates from manufacturer data sheet — 6" OC required, measured at 9" OC
Checked against: Project Spec 08-31
Working clearance below required minimum at panel — 30" required, 22" measured
Checked against: Applicable Standard
codebuddy.chatPage 1 of 4
Trusted by teams at
Three steps. Five minutes.
Submit your job, and our patent-pending AI technology reviews every photo against your standards, specs, and existing tracking.
Tell us about the job.
Project name, address in Santa Fe, and primary trade or discipline. We look up the applicable standards and regulations automatically from the address.
Send your photos and open items.
Upload directly, share a Drive/Dropbox link, or email them over. Your existing tracking sets the bar — anything already on it doesn't count as a finding.
Our patent-pending technology and AI system analyze every photo.
Cross-references each image against your specs, the applicable standards, and your existing tracking — helping identify deviations your list may have missed.
Get your report within 24 hours*.
Each finding includes the photo, the exact location, and the code section or spec it deviates from. Sorted by severity so you know what to fix first.
Built by Code Buddy.
Code Buddy is an AI-powered compliance platform used by thousands of field professionals across construction, energy, manufacturing, and fleet operations. Our patent-pending technology checks job site photos against codes, specs, and standards — the same technology that powers this report.
Built for the people who actually do the work.
Industries supported
Report turnaround
If nothing new identified
The kind of things we help catch.
Examples based on past reports. Each finding includes the photo, location, and the reference it was checked against.
Parapet wall flashing detail does not account for freeze-thaw ice dam formation common at Santa Fe's 7,000-foot elevation.
Vigas extending through exterior walls lack required bearing plates and moisture seals at stucco penetration points.
Heating system BTU output insufficient for high-altitude design temperature of negative 2 degrees per Santa Fe climate data.
Exterior receptacle covers not rated for UV exposure at high altitude where solar radiation intensity is significantly elevated.
Supply line burial depth does not meet frost depth requirement for Santa Fe's extended freeze season from October to April.
Skylight area exceeds maximum fenestration percentage without compensating wall insulation upgrades per IECC trade-off method.
And only if we identify something that wasn't already on your list.
If everything identified was already on your list, you pay nothing. You keep the report either way.
GET STARTEDLimited spots each week.
Every report is reviewed by a QA professional before delivery — not just generated and sent. That human review step means we can only take a limited number of jobs per week. Submissions are reviewed in the order they're received, and we'll let you know upfront if your report will take longer than 24 hours.
Before you ask.
What special building requirements apply in Santa Fe?
Santa Fe enforces New Mexico construction codes plus local historic district design standards. Projects in designated areas must comply with architectural review for massing, materials, and pueblo-revival style guidelines in addition to standard structural and energy code requirements.
Does CodeBuddy check Santa Fe's historic district requirements?
CodeBuddy focuses on building code compliance but flags design elements that commonly conflict with Santa Fe historic review, such as non-traditional rooflines, prohibited materials, and window proportions that trigger architectural committee revision requests.
How does high altitude affect Santa Fe plan reviews?
Santa Fe sits at 7,000 feet where intense UV degrades materials faster, freeze-thaw cycling stresses masonry, and heating loads increase significantly. CodeBuddy verifies equipment sizing, insulation values, and material ratings appropriate for high-altitude conditions.
What is the cost for a Santa Fe plan review?
CodeBuddy reviews Santa Fe plans for $250 with 24-hour turnaround. The report addresses code compliance across all trades with specific attention to adobe construction, high-altitude climate loads, and freeze protection requirements.
Are traditional construction methods like vigas and adobe covered?
Yes. CodeBuddy reviews viga beam connections, adobe wall specifications, and canale drainage details against New Mexico's earthen building provisions and structural requirements, ensuring traditional methods meet current code performance standards.
Also in New Mexico