Gulfport, Mississippi
Find what your
punch list missed.
Send us photos and your tracking list. Get a written findings report within 24 hours* — before your inspector or auditor does.
— any industry with field inspections in Gulfport.
$250, one time · Nothing new, no charge · You keep the report either way
*Depending on availability. We'll confirm turnaround when you submit.
The Inspection Readiness Report for Gulfport costs $250 one-time and delivers written findings within 24 hours. Gulfport is a major port city on the Mississippi Gulf Coast that has undergone extensive post-Katrina rebuilding with updated flood maps and elevated construction standards. The Seabee base and surrounding residential growth keep the building department busy, and inspectors enforce coastal flood and wind requirements strictly.
Code BuddyPrepared for Acme Mechanical Inc.
Location
Gulfport, MS
Date
Aug 8, 2026
Trade
Electrical
Findings
Penetration seal not matching approved submittal — visible gap at fire-rated assembly
Checked against: Company SOP 4.2
Fastener pattern deviates from manufacturer data sheet — 6" OC required, measured at 9" OC
Checked against: Project Spec 08-31
Working clearance below required minimum at panel — 30" required, 22" measured
Checked against: Applicable Standard
codebuddy.chatPage 1 of 4
Trusted by teams at
Three steps. Five minutes.
Submit your job, and our patent-pending AI technology reviews every photo against your standards, specs, and existing tracking.
Tell us about the job.
Project name, address in Gulfport, and primary trade or discipline. We look up the applicable standards and regulations automatically from the address.
Send your photos and open items.
Upload directly, share a Drive/Dropbox link, or email them over. Your existing tracking sets the bar — anything already on it doesn't count as a finding.
Our patent-pending technology and AI system analyze every photo.
Cross-references each image against your specs, the applicable standards, and your existing tracking — helping identify deviations your list may have missed.
Get your report within 24 hours*.
Each finding includes the photo, the exact location, and the code section or spec it deviates from. Sorted by severity so you know what to fix first.
Built by Code Buddy.
Code Buddy is an AI-powered compliance platform used by thousands of field professionals across construction, energy, manufacturing, and fleet operations. Our patent-pending technology checks job site photos against codes, specs, and standards — the same technology that powers this report.
Built for the people who actually do the work.
Industries supported
Report turnaround
If nothing new identified
The kind of things we help catch.
Examples based on past reports. Each finding includes the photo, location, and the reference it was checked against.
Post-Katrina elevated home foundation not meeting updated FEMA flood map base flood elevation for Gulfport coastal zone
Roof-to-wall hurricane strap connectors using non-galvanized steel in Gulfport salt air coastal corrosion environment
Branch circuit wiring in flood zone crawl space not using wet-location-rated methods below advisory flood elevation
Ductwork routed through unconditioned crawl space lacking vapor barrier wrap in Gulfport's hot-humid coastal climate
Tankless water heater exhaust clearance to operable window less than required 3 feet in tight lot construction
Address numbers not visible from street at minimum 4-inch height on new construction in Gulfport subdivision
And only if we identify something that wasn't already on your list.
If everything identified was already on your list, you pay nothing. You keep the report either way.
GET STARTEDLimited spots each week.
Every report is reviewed by a QA professional before delivery — not just generated and sent. That human review step means we can only take a limited number of jobs per week. Submissions are reviewed in the order they're received, and we'll let you know upfront if your report will take longer than 24 hours.
Before you ask.
How does Gulfport's post-Katrina rebuilding affect inspections?
Gulfport adopted updated FEMA flood maps and stricter wind resistance standards after Hurricane Katrina. Inspectors verify elevated construction, updated base flood elevations, and enhanced wind-rated connections more rigorously than before. The $250 report checks all post-Katrina code updates.
What does the Gulfport Inspection Readiness Report include?
The report covers all major trades including structural, electrical, mechanical, plumbing, fire protection, and building envelope. You submit photos and your tracking list, and within 24 hours you receive written findings with severity ratings and code references specific to Gulfport requirements.
Does the report cover projects near the Gulfport port or Seabee base?
Yes. Commercial and residential projects throughout the Gulfport metro area are covered, including new construction supporting the port district and military base communities. The report reviews building code compliance for the specific wind and flood zone your project sits within.
What coastal-specific items does the Gulfport report check?
The report reviews flood zone construction methods, elevated foundation requirements, corrosion-resistant fasteners and connectors for salt air exposure, wind-rated sheathing attachment, impact-rated openings where required, and flood-resistant materials below the base flood elevation.
Can I use the report for multiple inspection phases in Gulfport?
Each $250 report covers one inspection stage for one project. If you need coverage for foundation, framing, rough-in, and final inspections, each phase is a separate report. This lets you submit current photos that match the actual construction stage being inspected.
Also in Mississippi