Shreveport, Louisiana
Find what your
punch list missed.
Send us photos and your tracking list. Get a written findings report within 24 hours* — before your inspector or auditor does.
— any industry with field inspections in Shreveport.
$250, one time · Nothing new, no charge · You keep the report either way
*Depending on availability. We'll confirm turnaround when you submit.
The Inspection Readiness Report for Shreveport costs $250 one-time and delivers written findings within 24 hours. Shreveport sits in northwest Louisiana along the Red River, with a more inland climate than coastal parishes but still within the hot-humid zone. The city's mix of aging commercial stock near downtown and new residential development around Barksdale AFB creates varied inspection challenges.
Code BuddyPrepared for Acme Mechanical Inc.
Location
Shreveport, LA
Date
Aug 8, 2026
Trade
Electrical
Findings
Penetration seal not matching approved submittal — visible gap at fire-rated assembly
Checked against: Company SOP 4.2
Fastener pattern deviates from manufacturer data sheet — 6" OC required, measured at 9" OC
Checked against: Project Spec 08-31
Working clearance below required minimum at panel — 30" required, 22" measured
Checked against: Applicable Standard
codebuddy.chatPage 1 of 4
Trusted by teams at
Three steps. Five minutes.
Submit your job, and our patent-pending AI technology reviews every photo against your standards, specs, and existing tracking.
Tell us about the job.
Project name, address in Shreveport, and primary trade or discipline. We look up the applicable standards and regulations automatically from the address.
Send your photos and open items.
Upload directly, share a Drive/Dropbox link, or email them over. Your existing tracking sets the bar — anything already on it doesn't count as a finding.
Our patent-pending technology and AI system analyze every photo.
Cross-references each image against your specs, the applicable standards, and your existing tracking — helping identify deviations your list may have missed.
Get your report within 24 hours*.
Each finding includes the photo, the exact location, and the code section or spec it deviates from. Sorted by severity so you know what to fix first.
Built by Code Buddy.
Code Buddy is an AI-powered compliance platform used by thousands of field professionals across construction, energy, manufacturing, and fleet operations. Our patent-pending technology checks job site photos against codes, specs, and standards — the same technology that powers this report.
Built for the people who actually do the work.
Industries supported
Report turnaround
If nothing new identified
The kind of things we help catch.
Examples based on past reports. Each finding includes the photo, location, and the reference it was checked against.
Floor joist sistering in Red River flood plain renovation not using pressure-treated lumber as required for ground contact proximity
Arc-fault circuit interrupter protection not extended to all bedroom circuits in Shreveport residential remodel project
Cast iron drain line transition to PVC lacking approved shielded coupling at material change in aging Shreveport building stock
Supply and return air duct imbalance causing negative pressure in tightly sealed home built to current energy code standards
Attic access hatch missing insulation dam and weather stripping required for energy code compliance in hot-humid zone
Fire-rated garage-to-dwelling door replaced with non-rated interior door during renovation of attached garage
And only if we identify something that wasn't already on your list.
If everything identified was already on your list, you pay nothing. You keep the report either way.
GET STARTEDLimited spots each week.
Every report is reviewed by a QA professional before delivery — not just generated and sent. That human review step means we can only take a limited number of jobs per week. Submissions are reviewed in the order they're received, and we'll let you know upfront if your report will take longer than 24 hours.
Before you ask.
What does the Shreveport Inspection Readiness Report include?
The report reviews your submitted photos and tracking list against applicable building codes for the Shreveport area. It identifies items an inspector is likely to cite, covering structural, electrical, plumbing, mechanical, fire protection, and building envelope trades.
Is the $250 report relevant for renovation projects in older Shreveport buildings?
Renovation work is an excellent fit. Shreveport has significant older building stock near downtown and along the Red River corridor. The report identifies where existing conditions trigger code upgrade requirements and flags material transition details that inspectors verify closely.
How does Shreveport's climate affect what the report checks?
Shreveport falls in the hot-humid climate zone, so the report evaluates vapor barriers, attic insulation and ventilation, condensate management, and energy code compliance. Although Shreveport is more inland than coastal Louisiana, humidity-driven requirements still apply to all new construction and major renovations.
Does the report cover projects near Barksdale Air Force Base?
Yes. Residential and commercial projects in the Bossier City and Barksdale AFB area fall under the same Louisiana building codes. The report covers all standard building code compliance items for new construction and renovation work in the greater Shreveport-Bossier metro area.
How fast will I receive the Shreveport report after submitting?
Written findings are delivered within 24 hours of receiving your photos and tracking list. Most reports are completed in 12 to 18 hours. The turnaround gives you time to address any findings before your scheduled inspection date.
Also in Louisiana