Overland Park, Kansas
Find what your
punch list missed.
Send us photos and your tracking list. Get a written findings report within 24 hours* — before your inspector or auditor does.
— any industry with field inspections in Overland Park.
$250, one time · Nothing new, no charge · You keep the report either way
*Depending on availability. We'll confirm turnaround when you submit.
The Inspection Readiness Report for Overland Park, Kansas costs $250 one-time with 24-hour turnaround. Overland Park is the largest city in Johnson County and one of the fastest-growing suburbs in the Kansas City metro. Inspectors here enforce Kansas-adopted codes with local Johnson County amendments, paying close attention to expansive clay soil foundations, energy code compliance in new residential subdivisions, and tornado-resistant construction detailing.
Code BuddyPrepared for Acme Mechanical Inc.
Location
Overland Park, KS
Date
Aug 8, 2026
Trade
Electrical
Findings
Penetration seal not matching approved submittal — visible gap at fire-rated assembly
Checked against: Company SOP 4.2
Fastener pattern deviates from manufacturer data sheet — 6" OC required, measured at 9" OC
Checked against: Project Spec 08-31
Working clearance below required minimum at panel — 30" required, 22" measured
Checked against: Applicable Standard
codebuddy.chatPage 1 of 4
Trusted by teams at
Three steps. Five minutes.
Submit your job, and our patent-pending AI technology reviews every photo against your standards, specs, and existing tracking.
Tell us about the job.
Project name, address in Overland Park, and primary trade or discipline. We look up the applicable standards and regulations automatically from the address.
Send your photos and open items.
Upload directly, share a Drive/Dropbox link, or email them over. Your existing tracking sets the bar — anything already on it doesn't count as a finding.
Our patent-pending technology and AI system analyze every photo.
Cross-references each image against your specs, the applicable standards, and your existing tracking — helping identify deviations your list may have missed.
Get your report within 24 hours*.
Each finding includes the photo, the exact location, and the code section or spec it deviates from. Sorted by severity so you know what to fix first.
Built by Code Buddy.
Code Buddy is an AI-powered compliance platform used by thousands of field professionals across construction, energy, manufacturing, and fleet operations. Our patent-pending technology checks job site photos against codes, specs, and standards — the same technology that powers this report.
Built for the people who actually do the work.
Industries supported
Report turnaround
If nothing new identified
The kind of things we help catch.
Examples based on past reports. Each finding includes the photo, location, and the reference it was checked against.
Engineered foundation plan not on site for review on lot with documented expansive clay soils in Johnson County soil survey
Garage-to-house door not self-closing and not rated for required 20-minute fire resistance per IRC Section R302.5
Energy recovery ventilator not installed in tightly sealed new construction home with tested ACH50 below 3.0 threshold
Kitchen island receptacle outlet spacing exceeds 24-inch maximum measured from countertop edge per NEC 210.52(C)
Water heater expansion tank missing on closed-loop potable water system with pressure-reducing valve at meter
Residential fire sprinkler coverage pattern obstructed by ceiling fan canopy installed within 3 feet of sprinkler head
And only if we identify something that wasn't already on your list.
If everything identified was already on your list, you pay nothing. You keep the report either way.
GET STARTEDLimited spots each week.
Every report is reviewed by a QA professional before delivery — not just generated and sent. That human review step means we can only take a limited number of jobs per week. Submissions are reviewed in the order they're received, and we'll let you know upfront if your report will take longer than 24 hours.
Before you ask.
Does Overland Park have local code amendments beyond Kansas state codes?
Yes. Overland Park and Johnson County adopt the International codes with local amendments covering stormwater detention requirements, residential design standards, and energy efficiency provisions. Contractors should check the current amendment list with the Overland Park Planning and Development Department.
What soil conditions should builders expect in Overland Park?
Eastern Kansas including Johnson County has significant expansive clay soils. The Overland Park building department often requires engineered foundation designs with soil testing. Builders should plan for potential over-excavation and replacement fill or post-tensioned slab systems.
How strict is Overland Park on energy code enforcement?
Overland Park enforces the Kansas-adopted energy code closely in new residential construction. Inspectors verify insulation R-values, blower door test results, duct leakage testing, and window U-factor ratings. Third-party energy testing may be required for compliance documentation.
What are the most common re-inspection items in Overland Park?
Common re-inspection items include missing AFCI protection on bedroom circuits, garage fire separation deficiencies, improper flashing at roof-to-wall transitions, and kitchen receptacle spacing violations. Foundation issues related to clay soils also generate re-inspections.
Can I submit photos from multiple inspection stages in one $250 report?
The $250 Inspection Readiness Report covers one inspection stage per submission. If you want findings for both your rough-in and final inspections in Overland Park, submit each stage separately. Each report is delivered within 24 hours of submission.
Also in Kansas